Xiaozhi Hu
- (2004): Influence of fracture process zone height on fracture energy of concrete. In: Cement and Concrete Research, v. 34, n. 8 (August 2004).
- (2021): Modelling and testing of Temperature-Dependent strength and toughness of asphalt concrete from −10 °C to + 23 °C using small notched beams. In: Construction and Building Materials, v. 294 (August 2021).
- (2022): Interfacial design and flexural property of CFRP/aluminum-honeycomb sandwich with Aramid-pulp micro/nano-fiber interlays. In: Composite Structures, v. 289 (June 2022).
- (2019): Quasi-brittle fracture criterion of bamboo-based fiber composites in transverse direction based on boundary effect model. In: Composite Structures, v. 220 (July 2019).
- (2020): Effect of resin pre-coating method on repairing subsurface micro-defects in sandstone and granite. In: Construction and Building Materials, v. 264 (December 2020).
- (2010): Analytical Solution for Fracture Analysis of CFRP Sheet–Strengthened Cracked Concrete Beams. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 10 (October 2010).
- (2010): Mechanism behind the Size Effect Phenomenon. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 1 (January 2010).
- (2007): Analytical Method for Pullout of Anchor from Anchor–Mortar–Concrete Anchorage System due to Shear Failure of Mortar. In: Journal of Engineering Mechanics (ASCE), v. 133, n. 12 (December 2007).
- (2016): Benefits of Short Kevlar Fiber Reinforcement at the Interface for Repair of Concrete-Like Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (September 2016).
- (2014): Correlation between Cohesive Crack-Tip Local Fracture Energy and Peak Load in Mortar Beams. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 10 (October 2014).
- (1990): Experimental Method to Determine Extension of Fracture‐Process Zone. In: Journal of Materials in Civil Engineering (ASCE), v. 2, n. 1 (February 1990).
- (2019): Repair of subsurface micro-cracks in rock using resin pre-coating technique. In: Construction and Building Materials, v. 196 (January 2019).
- (2005): Applications of Boundary Effect Model to Quasi-Brittle Fracture of Concrete and Rock. In: Journal of Advanced Concrete Technology, v. 3, n. 3 ( 2005).
- (2011): Size effect on tensile softening relation. In: Materials and Structures, v. 44, n. 1 (January 2011).
- (2010): Analytical solution for the pull-out response of FRP rods embedded in steel tubes filled with cement grout. In: Materials and Structures, v. 43, n. 5 (June 2010).
- (2009): Analytical Method for Failure of Anchor-Grout-Concrete Anchorage due to Concrete Cone Failure and Interfacial Debonding. In: Journal of Structural Engineering (ASCE), v. 135, n. 4 (April 2009).
Structurae cooperates with
