Yongjia He
- (2024): Pozzolanic reactivity of carbonated high-calcium fly ash: A mechanism study. In: Construction and Building Materials, v. 446 (October 2024).
- (2019): The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. In: Cement and Concrete Research, v. 118 (April 2019).
- (2023): Pore structure evolution and sulfate attack of high-volume slag blended mortars under standard curing and steam curing. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Effects of curing regimes on the chloride binding capacity of cementitious materials. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Investigation of sulfate attack on aluminum phases in cement-metakaolin paste. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Revealing the micro-mechanical characteristics of high early strength cement pastes. In: Construction and Building Materials, v. 342 (August 2022).
- (2021): An alternative method for performance improvement of ultra-high performance concrete by internal curing: Role of physicochemical properties of saturated lightweight fine aggregate. In: Construction and Building Materials, v. 312 (December 2021).
- (2021): A new development of eco-friendly Ultra-High performance concrete (UHPC): Towards efficient steel slag application and multi-objective optimization. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Effects of Asphalt Modification of Paste–Aggregate Interface on the Transport and Mechanical Properties of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 6 (June 2021).
- (2021): Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content. In: Construction and Building Materials, v. 273 (March 2021).
- (2020): Influence of external water introduced by coral sand on autogenous shrinkage and microstructure development of Ultra-High Strength Concrete (UHSC). In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Evolution of aluminate hydrate phases in fly ash-cement system under the sulfate conditions. In: Construction and Building Materials, v. 252 (August 2020).
- (2018): Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete. In: Construction and Building Materials, v. 162 (February 2018).
- (2020): The effect of activators on the dissolution characteristics and occurrence state of aluminum of alkali-activated metakaolin. In: Construction and Building Materials, v. 235 (February 2020).
- (2019): Physical and chemical coupling effect of metakaolin induced chloride trapping capacity variation for Ultra High Performance Fibre Reinforced Concrete (UHPFRC). In: Construction and Building Materials, v. 223 (October 2019).
- (2019): Understanding the porous aggregates carrier effect on reducing autogenous shrinkage of Ultra-High Performance Concrete (UHPC) based on response surface method. In: Construction and Building Materials, v. 222 (October 2019).
- (2012): Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (μCT) image. In: Construction and Building Materials, v. 27 (February 2012).
- (2014): Conductive aggregate prepared using graphite and clay and its use in conductive mortar. In: Construction and Building Materials, v. 53 (February 2014).
- (2014): Pore-scale modelling of 3D moisture distribution and critical saturation in cementitious materials. In: Construction and Building Materials, v. 64 (August 2014).
- (2016): Hydration monitoring and strength prediction of cement-based materials based on the dielectric properties. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): TiO2 containing electromagnetic wave absorbing aggregate and its application in concrete. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Hydration of quaternary phase-gypsum system. In: Construction and Building Materials, v. 152 (October 2017).
- (2014): Effect of calcium–silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature. In: Materials and Structures, v. 47, n. 1-2 (January 2014).
- (2018): Microwave Absorbing Mortar Using Magnetic Hollow Fly Ash Microspheres/Fe3O4 Composite as Absorbent. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
Structurae cooperates with
