Bin He 
- (2024): Seismic evaluation of post-tensioned precast concrete frames with non-grouted fuse-type dissipaters under successive excitations. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Experimental study on composite flocculant-electroosmosis combined with segmented solidification treatment of high-water-content slurry. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Mechanical properties and hydration behaviour of circulating fluidised bed fly ash- ground granulated blast furnace slag-lime ecofriendly cementitious material. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Durability study and mechanism analysis of red mud-coal metakaolin geopolymer concrete under a sulfate environment. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Experimental study on electroosmosis-solidification of engineering slurry pretreated by composite flocculant. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Effect of lime on the physical, mechanical, and hydration properties of circulating fluidized bed fly ash-blast furnace slag-based cementitious materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Characterization of red mud and fly ash based for co-curing of Cu2+-contaminated soil. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Frequent heatwaves limit the indirect growth effect of urban vegetation in China. In: Sustainable Cities and Society, v. 96 (September 2023).
- (2023): Correction of direction reduction factors of extreme wind speed considering the Ekman spiral in the wind load estimation of super high‐rise buildings with heights of 400–800 m. In: The Structural Design of Tall and Special Buildings, v. 32, n. 8-9 (8 May 2023).
- (2023): Experimental Study on Aerodynamic Forces of a Suspended Arch Roof. In: International Journal of Structural Stability and Dynamics, v. 23, n. 13 (February 2023).
- (2023): Recognition of typical environmental control behavior patterns of indoor occupants based on temporal series association analysis. In: Building and Environment, v. 234 (April 2023).
- (2023): Characteristics of waste mud treated by construction waste-slag based flocculation-solidification combined method. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Real‐time automatic crack detection method based on drone. In: Computer-Aided Civil and Infrastructure Engineering, v. 38, n. 7 (August 2023).
- (2023): Thermal environment model construction of Chinese solar greenhouse based on temperature–wave interaction theory. In: Energy and Buildings, v. 279 (January 2023).
- (2022): Electrochemical response and effect evaluation of high belite sulphoaluminate cement combined with red mud-fly ash on solidification of Cu2+-contaminated kaolin. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Quantifying the Effect of Index-Based Operation Logic for Building Environmental Control System—Taking Shading as Example. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2022): Influence of novel polymer waterproofing membrane on mechanical properties of tunnel lining structure. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Influence Assessment of New Inner Tube Porous Brick with Absorbent Concrete on Urban Floods Control. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): Compressive strength and electrochemical impedance response of red mud-coal metakaolin geopolymer exposed to sulfuric acid. In: Construction and Building Materials, v. 303 (October 2021).
- (2020): Optimising intelligent control of a highway bridge with magnetorheological dampers. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 173, n. 3 (March 2020).
- (2016): Electromechanical bending behavior study of soft photocurable ionogel actuator using a new finite element method. In: Smart Materials and Structures, v. 25, n. 9 (September 2016).
- (2017): Calculation Theory and Test Verification for Skeleton Curve of T-shaped Shear Walls. In: Structural Engineering International, v. 27, n. 2 (May 2017).
Structurae cooperates with
