Hong Hao 
- : Systematical vibration data recovery based on novel convolutional self-attention networks. In: Journal of Civil Structural Health Monitoring.
- (2024): Study on the Dependence of the Acoustoelastic Effect in Concrete on Material Strength. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 11 (November 2024).
- (2024): Structural damage identification by using physics-guided residual neural networks. In: Engineering Structures, v. 318 (November 2024).
- (2024): Structural Damage Classification of Large-Scale Bridges Using Convolutional Neural Networks and Time Domain Responses. In: Journal of Performance of Constructed Facilities (ASCE), v. 38, n. 4 (August 2024).
- (2015): Structural Damage Identification with Extracted Impulse Response Functions and Optimal Sensor Locations. In: Electronic Journal of Structural Engineering, v. 14, n. 1 (January 2015).
- (2021): Study on Parameters setting of Semi Transverse Smoke Exhaust in Subway Tunnel. In: IOP Conference Series: Earth and Environmental Science, v. 825, n. 1 (1 July 2021).
- (2017): A study of RC bridge columns under contact explosion. In: International Journal of Impact Engineering, v. 109 (November 2017).
- (2023): Structural vibration control of spar-buoy floating offshore wind turbines. In: Engineering Structures, v. 294 (November 2023).
- (2022): Structural damage quantification using ensemble‐based extremely randomised trees and impulse response functions. In: Structural Control and Health Monitoring, v. 29, n. 10 (13 September 2022).
- (2022): Structural behavior and vibration characteristics of geopolymer composite lightweight sandwich panels for prefabricated buildings. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Structural damage detection using low-rank matrix approximation and cointegration analysis. In: Engineering Structures, v. 267 (September 2022).
- (2022): Structural performance evaluation of UHPC/conventional concrete cast on new Y-shape FRP stay-in-place formwork for concrete bridge decks. In: Structures, v. 41 (July 2022).
- (2022): Structural damage detection via phase space based manifold learning under changing environmental and operational conditions. In: Engineering Structures, v. 263 (July 2022).
- (2015): Structural damage identification with power spectral density transmissibility: numerical and experimental studies. In: Smart Structures and Systems, v. 15, n. 1 (January 2015).
- (2022): Structural damage detection by integrating robust PCA and classical PCA for handling environmental variations and imperfect measurement data. In: Advances in Structural Engineering, v. 25, n. 8 (April 2022).
- (2021): Superelastic CuAlBe wire-based sliding lead rubber bearings for seismic isolation of bridges in cold regions. In: Engineering Structures, v. 247 (November 2021).
- (2021): Structural damage identification with limited modal measurements and ultra‐sparse Bayesian regression. In: Structural Control and Health Monitoring, v. 28, n. 6 (April 2021).
- (2014): Substructure damage identification based on wavelet-domain response reconstruction. In: Structural Health Monitoring, v. 13, n. 4 (February 2014).
- (2020): Structural damage identification by sparse deep belief network using uncertain and limited data. In: Structural Control and Health Monitoring, v. 27, n. 5 (May 2020).
- (2018): Study of concrete damage mechanism under hydrostatic pressure by numerical simulations. In: Construction and Building Materials, v. 160 (January 2018).
- (2005): Study of SSI and non-uniform ground motion effect on pounding between bridge girders. In: Soil Dynamics and Earthquake Engineering, v. 25, n. 7-10 (August 2005).
- (2019): Structural damage identification with uncertain modelling error and measurement noise by clustering based tree seeds algorithm. In: Engineering Structures, v. 185 (April 2019).
- (2016): Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Structural response recovery based on improved multi-scale principal component analysis considering sensor performance degradation. In: Advances in Structural Engineering, v. 21, n. 2 (August 2017).
- (2010): Structure Damage Detection Using Neural Network with Multi-Stage Substructuring. In: Advances in Structural Engineering, v. 13, n. 1 (February 2010).
- (2017): Study of autoclaved aerated concrete masonry walls under vented gas explosions. In: Engineering Structures, v. 141 (June 2017).
- (2018): Structural response of modular buildings – An overview. In: Journal of Building Engineering, v. 16 (March 2018).
- (2018): Structural damage identification based on autoencoder neural networks and deep learning. In: Engineering Structures, v. 172 (October 2018).
- (2010): Substructuring Technique for Damage Detection Using Statistical Multi-Stage Artificial Neural Network. In: Advances in Structural Engineering, v. 13, n. 4 (August 2010).
- (2016): Substructural interface force identification with limited vibration measurements. In: Journal of Civil Structural Health Monitoring, v. 6, n. 3 (July 2016).
Structurae cooperates with
