Meor Othman Hamzah 
- (2021): Validation of a model to predict the effect of short-term aging on the rheological properties of asphalt binders. In: Construction and Building Materials, v. 278 (April 2021).
- (2018): Evaluation of asphalt mixture behavior incorporating warm mix additives and reclaimed asphalt pavement. In: Journal of Traffic and Transportation Engineering (English Edition), v. 5, n. 3 (June 2018).
- (2019): Review of sustainability, pretreatment, and engineering considerations of asphalt modifiers from the industrial solid wastes. In: Journal of Traffic and Transportation Engineering (English Edition), v. 6, n. 3 (June 2019).
- (2020): Microscopic analysis and mechanical properties of Recycled Paper Mill Sludge modified asphalt mixture using granite and limestone aggregates. In: Construction and Building Materials, v. 243 (May 2020).
- (2018): Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method. In: Construction and Building Materials, v. 179 (August 2018).
- (2018): An alternative protocol to artificially simulate short-term ageing of binders for selected regional condition. In: Construction and Building Materials, v. 161 (February 2018).
- (2019): Evaluation of moisture susceptibility of asphalt-aggregate constituents subjected to direct tensile test using imaging technique. In: Construction and Building Materials, v. 227 (December 2019).
- (2017): A quick approach for rheological evaluation of warm asphalt binders using response surface method. In: Journal of Civil Engineering and Management, v. 23, n. 4 (April 2017).
- (2018): Effect of a Poly-olefin Based Additive on Bitumen and Asphalt Mix Performance. In: Advances in Civil Engineering Materials, v. 7, n. 3 (June 2018).
- (2019): Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete. In: Construction and Building Materials, v. 217 (August 2019).
- (2019): Assessments of Potential Service Characteristics of Ethanol and Ethanol-NaHCO3 Foamed WMA Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 6 (June 2019).
- (2019): Evaluating the Surface Free Energy and Moisture Sensitivity of Warm Mix Asphalt Binders Using Dynamic Contact Angle. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Asphalt mixture workability and effects of long-term conditioning methods on moisture damage susceptibility and performance of warm mix asphalt. In: Construction and Building Materials, v. 207 (May 2019).
- (2015): Evaluation of the Rheological Properties and Activation Energy of Virgin and Recovered Asphalt Binder Blends. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 3 (March 2015).
- (2012): The effects of initial conditioning and ambient temperatures on abrasion loss and temperature change of porous asphalt. In: Construction and Building Materials, v. 29 (April 2012).
- (2012): Permeability loss in porous asphalt due to binder creep. In: Construction and Building Materials, v. 30 (May 2012).
- (2013): Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art. In: Construction and Building Materials, v. 38 (January 2013).
- (2013): The effects of break point location and nominal maximum aggregate size on porous asphalt properties. In: Construction and Building Materials, v. 44 (July 2013).
- (2013): Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method. In: Construction and Building Materials, v. 47 (October 2013).
- (2015): Characterization of the rate of change of rheological properties of nano-modified asphalt. In: Construction and Building Materials, v. 98 (November 2015).
- (2016): Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders. In: Construction and Building Materials, v. 114 (July 2016).
- (2016): Disruption of air voids continuity based on permeability loss due to mortar creep. In: Construction and Building Materials, v. 116 (July 2016).
- (2016): A simple treatment of electronic-waste plastics to produce asphalt binder additives with improved properties. In: Construction and Building Materials, v. 110 (May 2016).
- (2017): Use of imaging technique and direct tensile test to evaluate moisture damage properties of warm mix asphalt using response surface method. In: Construction and Building Materials, v. 132 (February 2017).
- (2017): Optimization in producing warm mix asphalt with polymer modified binder and surfactant-wax additive. In: Construction and Building Materials, v. 141 (June 2017).
- (2018): Effects of a surfactant-wax based warm additive on high temperature rheological properties of asphalt binders. In: Construction and Building Materials, v. 183 (September 2018).
- (2016): The Effects of extended short-term aging duration on asphalt binder behaviour at high temperatures. In: The Baltic Journal of Road and Bridge Engineering, v. 11, n. 4 (December 2016).
Structurae cooperates with
