-
Yan, Yujie / Hajjar, Jerome F. (2022): Geometric models from laser scanning data for superstructure components of steel girder bridges. In: Automation in Construction, v. 142 (October 2022).
https://doi.org/10.1016/j.autcon.2022.104484
-
Yan, Yujie / Guldur Erkal, Burcu / Hajjar, Jerome F. (2022): A Framework for Automated Bridge Inspections and Assessments with Visual Sensing Technology. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
https://doi.org/10.2749/prague.2022.0330
-
Krzmarzick, Dan P. / Hajjar, Jerome F. (2006): Load Rating of Curved Composite Steel I-Girder Bridges through Load Testing with Heavy Trucks. Presented at: Structures Congress 2006, May 18-21, 2006, St. Louis, Missouri, United States.
https://doi.org/10.1061/40889(201)149
-
Schiller, Paul H. / Hajjar, Jerome F. / Molodan, Aleksandr (1997): Nonlinear analysis of composite concrete-filled steel tube frames. Presented at: International Conference: Composite Construction - Conventional and Innovative, Innsbruck, Austria, 16-18 September 1997.
https://doi.org/10.5169/seals-982
-
Bai, Rui / Hajjar, Jerome F. / Liu, Si-Wei / Chan, Siu-Lai (2020): A mixed-field Timoshenko beam-column element for direct analysis of tapered I-sections members. In: Journal of Constructional Steel Research, v. 172 (September 2020).
https://doi.org/10.1016/j.jcsr.2020.106157
-
Eckelman, Matthew J. / Brown, Clayton / Troup, Lucas N. / Wang, Lizhong / Webster, Mark D. / Hajjar, Jerome F. (2018): Life cycle energy and environmental benefits of novel design-for-deconstruction structural systems in steel buildings. In: Building and Environment, v. 143 (October 2018).
https://doi.org/10.1016/j.buildenv.2018.07.017
-
Tort, Cenk / Hajjar, Jerome F. (2010): Mixed Finite Element for Three-Dimensional Nonlinear Dynamic Analysis of Rectangular Concrete-Filled Steel Tube Beam-Columns. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 11 (November 2010).
https://doi.org/10.1061/(asce)em.1943-7889.0000179
-
Wang, Lizhong / Webster, Mark D. / Hajjar, Jerome F.: Experimental Investigation of Deconstructable Steel-Concrete Shear Connections in Sustainable Composite Beams. Presented at: Structures Congress 2017, April 6–8, 2017, Denver, Colorado.
https://doi.org/10.1061/9780784480410.004
-
Hajjar, Jerome F. (2003): Evolution of stress-resultant loading and ultimate strength surfaces in cyclic plasticity of steel wide-flange cross-sections. In: Journal of Constructional Steel Research, v. 59, n. 6 (June 2003).
https://doi.org/10.1016/s0143-974x(02)00063-9
-
Pallarés, Luis / Hajjar, Jerome F. (2010): Headed steel stud anchors in composite structures, Part II: Tension and interaction. In: Journal of Constructional Steel Research, v. 66, n. 2 (February 2010).
https://doi.org/10.1016/j.jcsr.2009.08.008
-
Pallarés, Luis / Hajjar, Jerome F. (2010): Headed steel stud anchors in composite structures, Part I: Shear. In: Journal of Constructional Steel Research, v. 66, n. 2 (February 2010).
https://doi.org/10.1016/j.jcsr.2009.08.009
-
Hajjar, Jerome F. / Krzmarzick, Dan / Pallarés, Luis (2010): Measured behavior of a curved composite I-girder bridge. In: Journal of Constructional Steel Research, v. 66, n. 3 (March 2010).
https://doi.org/10.1016/j.jcsr.2009.10.001
-
Wang, Lizhong / Webster, Mark D. / Hajjar, Jerome F. (2019): Pushout tests on deconstructable steel-concrete shear connections in sustainable composite beams. In: Journal of Constructional Steel Research, v. 153 (February 2019).
https://doi.org/10.1016/j.jcsr.2018.10.020
-
Hajjar, Jerome F. / Abel, John F. (1988): Parallel processing for transient nonlinear structural dynamics of three-dimensional framed structures using domain decomposition. In: Computers & Structures, v. 30, n. 6 (January 1988).
https://doi.org/10.1016/0045-7949(88)90189-7
-
Eatherton, Matthew R. / Hajjar, Jerome F. (2014): Hybrid simulation testing of a self-centering rocking steel braced frame system. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 11 (August 2014).
https://doi.org/10.1002/eqe.2419
-
Guldur Erkal, Burcu / Hajjar, Jerome F. (2017): Laser-based surface damage detection and quantification using predicted surface properties. In: Automation in Construction, v. 83 (November 2017).
https://doi.org/10.1016/j.autcon.2017.08.004
-
Filipov, Evgueni T. / Fahnestock, Larry A. / Steelman, Joshua S. / Hajjar, Jerome F. / LaFave, James M. / Foutch, Douglas A. (2013): Evaluation of quasi-isolated seismic bridge behavior using nonlinear bearing models. In: Engineering Structures, v. 49 (April 2013).
https://doi.org/10.1016/j.engstruct.2012.10.011
-
Steelman, Joshua S. / Hajjar, Jerome F. (2009): Influence of inelastic seismic response modeling on regional loss estimation. In: Engineering Structures, v. 31, n. 12 (December 2009).
https://doi.org/10.1016/j.engstruct.2009.07.026
-
Borello, Daniel J. / Andrawes, Bassem / Hajjar, Jerome F. / Olson, Scott M. / Hansen, James (2010): Experimental and analytical investigation of bridge timber piles under eccentric loads. In: Engineering Structures, v. 32, n. 8 (August 2010).
https://doi.org/10.1016/j.engstruct.2010.03.026
-
Saykin, Vitaliy V. / Nguyen, Tam H. / Hajjar, Jerome F. / Deniz, Derya / Song, Junho (2017): Material characterization using finite element deletion strategies for collapse modeling of steel structures. In: Engineering Structures, v. 147 (September 2017).
https://doi.org/10.1016/j.engstruct.2017.05.059
-
Zhou, Meng / Xu, Li-Yan / Tao, Mu-Xuan / Fan, Jian-Sheng / Hajjar, Jerome F. / Nie, Jian-Guo (2017): Experimental study on confining-strengthening, confining-stiffening, and fractal cracking of circular concrete filled steel tubes under axial tension. In: Engineering Structures, v. 133 (February 2017).
https://doi.org/10.1016/j.engstruct.2016.12.008
-
Perea, Tiziano / leon, Roberto T. / Hajjar, Jerome F. / Denavit, Mark D. (2014): Full-Scale Tests of Slender Concrete-Filled Tubes: Interaction Behavior. In: Journal of Structural Engineering (ASCE), v. 140, n. 9 (September 2014).
https://doi.org/10.1061/(asce)st.1943-541x.0000949
-
Eatherton, Matthew R. / Ma, Xiang / Krawinkler, Helmut / Deierlein, Gregory G. / Hajjar, Jerome F. (2014): Quasi-Static Cyclic Behavior of Controlled Rocking Steel Frames. In: Journal of Structural Engineering (ASCE), v. 140, n. 11 (November 2014).
https://doi.org/10.1061/(asce)st.1943-541x.0001005
-
Deniz, Derya / Song, Junho / Hajjar, Jerome F. (2017): Energy-based seismic collapse criterion for ductile planar structural frames. In: Engineering Structures, v. 141 (June 2017).
https://doi.org/10.1016/j.engstruct.2017.02.051
-
Steelman, Joshua S. / Fahnestock, Larry A. / Hajjar, Jerome F. / LaFave, James M. (2016): Performance of Nonseismic PTFE Sliding Bearings When Subjected to Seismic Demands. In: Journal of Bridge Engineering (ASCE), v. 21, n. 1 (January 2016).
https://doi.org/10.1061/(asce)be.1943-5592.0000777
-
Perea, Tiziano / leon, Roberto T. / Hajjar, Jerome F. / Denavit, Mark D. (2013): Full-Scale Tests of Slender Concrete-Filled Tubes: Axial Behavior. In: Journal of Structural Engineering (ASCE), v. 139, n. 7 (July 2013).
https://doi.org/10.1061/(asce)st.1943-541x.0000784
-
Denavit, Mark D. / Hajjar, Jerome F. (2012): Nonlinear Seismic Analysis of Circular Concrete-Filled Steel Tube Members and Frames. In: Journal of Structural Engineering (ASCE), v. 138, n. 9 (September 2012).
https://doi.org/10.1061/(asce)st.1943-541x.0000544
-
Tort, Cenk / Hajjar, Jerome F. (2010): Mixed Finite-Element Modeling of Rectangular Concrete-Filled Steel Tube Members and Frames under Static and Dynamic Loads. In: Journal of Structural Engineering (ASCE), v. 136, n. 6 (June 2010).
https://doi.org/10.1061/(asce)st.1943-541x.0000158
-
Denavit, Mark D. / Hajjar, Jerome F. / Perea, Tiziano / leon, Roberto T. (2018): Elastic flexural rigidity of steel-concrete composite columns. In: Engineering Structures, v. 160 (April 2018).
https://doi.org/10.1016/j.engstruct.2018.01.044
-
Deniz, Derya / Song, Junho / Hajjar, Jerome F. (2018): Energy-based sidesway collapse fragilities for ductile structural frames under earthquake loadings. In: Engineering Structures, v. 174 (November 2018).
https://doi.org/10.1016/j.engstruct.2018.07.019