Shuaicheng Guo
- (2023): A comparative study of bare and seawater sea sand concrete wrapped basalt fiber-reinforced polymer bars exposed to laboratory and real marine environments. In: Construction and Building Materials, v. 371 (March 2023).
- (2023): Experimental investigation on the mechanical properties of concrete utilizing pre-coated Brick-Concrete recycled coarse aggregates. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Dynamic Flexural Behaviors of AR-Glass Textile–Reinforced Concrete after Exposure to Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Effects of volume fraction and surface coating of textile yarns on the tensile performance of AR-glass textile reinforced concrete. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Experimental study on the effects of dynamic loading and seawater attack on bond behavior between basalt fiber reinforced polymer bars and seawater sea-sand concrete. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Flexural behaviors of sandwich panels with AR-glass textile-reinforced concrete under the low-velocity impact. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Experimental study on flexural behavior of BTRM reinforced with hybrid combinations of short fibers and pre-stressing. In: Structures, v. 49 (March 2023).
- (2023): Durability of BFRP bars embedded in seawater sea sand coral aggregate concrete in simulated seawater environment: Effects of coral coarse aggregate and cement contents. In: Construction and Building Materials, v. 362 (January 2023).
- (2023): Effects of coarse aggregate morphology on concrete mechanical properties. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Internal curing effect of saturated coral coarse aggregate in high-strength seawater sea sand concrete. In: Construction and Building Materials, v. 331 (May 2022).
- (2021): The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review. In: Construction and Building Materials, v. 282 (May 2021).
- (2021): Investigation on high-temperature resistance to permanent deformation of waste leather modified asphalt. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Experimental and numerical study on a new floor heating system using carbon fiber tape embedded in cement mortar. In: Journal of Building Engineering, v. 56 (September 2022).
- (2021): Improvement on the high-temperature stability and anti-aging performance of the rubberized asphalt binder with the Lucobit additive. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Characteristics of calcareous sand filler and its influence on physical and rheological properties of asphalt mastic. In: Construction and Building Materials, v. 301 (September 2021).
- (2019): High-Frequency Fatigue Performance of Cracked Mortar after Epoxy Grouting Reinforcement. In: International Journal of Geomechanics, v. 19, n. 5 (May 2019).
- (2020): Development of fatigue damage model of asphalt mixtures based on small-scale accelerated pavement test. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Atomic-structure, microstructure and mechanical properties of glass powder modified metakaolin-based geopolymer. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): External sulfate attack on concrete under combined effects of flexural fatigue loading and drying-wetting cycles. In: Construction and Building Materials, v. 249 (July 2020).
- (2019): Flexural and Shear Bond Performance of Polyurethane-Mortar Interface under Micro- and Macroscale. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 7 (July 2019).
- (2019): Atomic force microscope study of the aging/rejuvenating effect on asphalt morphology and adhesion performance. In: Construction and Building Materials, v. 205 (April 2019).
- (2019): Mechanical and durability performance evaluation of crumb rubber-modified epoxy polymer concrete overlays. In: Construction and Building Materials, v. 203 (April 2019).
- (2017): Experimental investigation of physical properties and accelerated sunlight-healing performance of flake graphite and exfoliated graphite nanoplatelet modified asphalt materials. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Laboratory performance evaluation of both flake graphite and exfoliated graphite nanoplatelet modified asphalt composites. In: Construction and Building Materials, v. 149 (September 2017).
- (2017): Durability performance of rubberized mortar and concrete with NaOH-Solution treated rubber particles. In: Construction and Building Materials, v. 153 (October 2017).
- (2018): Investigation of properties and performances of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete. In: Construction and Building Materials, v. 193 (December 2018).
- (2018): Investigation on the freeze-thaw damage to the jointed plain concrete pavement under different climate conditions. In: Frontiers of Structural and Civil Engineering, v. 12, n. 2 (April 2018).
- (2018): Microwave-healing performance of modified asphalt mixtures with flake graphite and exfoliated graphite nanoplatelet. In: Construction and Building Materials, v. 187 (October 2018).
- (2018): Characteristics of Water-Foamed Asphalt Mixture under Multiple Freeze-Thaw Cycles: Laboratory Evaluation. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
Structurae cooperates with
