Ming-Zhi Guo 
- (2024): Inhibition performance of extract reinforcement corrosion inhibitor from waste Platanus acerifolia leaves in simulated concrete pore solution. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Effects of CO2 curing methods on frost resistance and mechanical properties of recycled aggregate concrete. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Effects of early-age carbonation curing on the properties of cement-based materials: A review. In: Journal of Building Engineering, v. 84 (May 2024).
- (2023): CO2 curing of SCMs blended cement blocks subject to elevated temperatures. In: Construction and Building Materials, v. 374 (April 2023).
- (2023): Laboratory investigation of the chloride ingress into cement mortar incorporating a novel core–shell nanomaterial. In: Construction and Building Materials, v. 379 (May 2023).
- (2024): Influence of gas impurities (SO2 and NOX) in flue gas on the carbonation and hydration of cement compacts. In: Journal of Building Engineering, v. 82 (April 2024).
- (2024): Effects of early hydration of alite and belite phases on subsequent accelerated carbonation. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Deterioration of alkali-activated and Portland cement-based mortars under sulfur oxidizing bacteria corrosion. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Effect of foam stabilization on the properties of foamed concrete modified by expanded polystyrene. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Impact of heat curing regime on the compressive strength and drying shrinkage of alkali-activated slag mortar. In: Developments in the Built Environment, v. 14 (April 2023).
- (2022): Influence of ultrasonic triggering parameters on recovery performance of microcapsule-mediated self-healing cement mortar. In: Journal of Building Engineering, v. 62 (December 2022).
- (2022): Mechanical and microstructural performances of fly ash blended cement pastes with mixing CO2 during fresh stage. In: Construction and Building Materials, v. 358 (December 2022).
- (2022): Effect of citrate retarders on the expansion property and hydration behavior of light-burned magnesia cement-based materials. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Influence of Calcium Leaching on Mechanical and Physical Properties of Limestone Powder–Cement Pastes Cured under Different Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 9 (September 2022).
- (2022): Influence of luminescent powder type and characteristic on the glow light performance of architectural glass mortar. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Effect of lithium citrate on hydration of cement paste. In: Journal of Building Engineering, v. 52 (July 2022).
- (2022): Effect of CTAB on the healing of concrete cracks repaired by electrodeposition and the durability of repaired concrete. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Kinetics study of ultrasound-assisted chloride release from cementitious materials. In: Construction and Building Materials, v. 317 (January 2022).
- (2022): Chloride erosion resistance of calcium formate incorporated cement mortar under chloride attack. In: Construction and Building Materials, v. 314 (January 2022).
- (2022): Enzymatically induced phosphate precipitation (EIPP) for stabilization/solidification (S/S) treatment of heavy metal tailings. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Effect of direct carbonation routes of basic oxygen furnace slag (BOFS) on strength and hydration of blended cement paste. In: Construction and Building Materials, v. 304 (October 2021).
- (2021): CTAB-assisted electrodeposition of Cu coating on hardened cement paste for controlling microbial induced concrete corrosion. In: Construction and Building Materials, v. 304 (October 2021).
- (2017): Influence of Dust and Oil Accumulation on Effectiveness of Photocatalytic Concrete Surfaces. In: Journal of Environmental Engineering (ASCE), v. 143, n. 9 (September 2017).
- (2020): Effect of silica fume and fly ash on the stability of bound chlorides in cement mortar during electrochemical chloride extraction. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Influence of cation types on the stability of bound chloride ions in cement mortar simultaneously under electric field and SO42− attack. In: Construction and Building Materials, v. 245 (June 2020).
- (2020): Effect of electro-deposition on repair of cracks in reinforced concrete. In: Construction and Building Materials, v. 238 (March 2020).
- (2018): Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing. In: Construction and Building Materials, v. 179 (August 2018).
- (2019): Effect of sulfate ions on corrosion of reinforced steel treated by DNA corrosion inhibitor in simulated concrete pore solution. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Influence of sulfate salt type on passive film of steel in simulated concrete pore solution. In: Construction and Building Materials, v. 223 (October 2019).
- (2019): Effect of stray current on stability of bound chlorides in chloride and sulfate coexistence environment. In: Construction and Building Materials, v. 194 (January 2019).
Structurae cooperates with
