Esra Mete Güneyisi 
- (2024): Analyzing the load-displacement behavior and determining fracture parameters and bond strength of high-strength nonfibrous and fibrous SCC mixtures. In: Journal of Building Engineering, v. 85 (May 2024).
- (2023): Inelastic behavior of reinforced concrete structure with tuned mass damper. In: Asian Journal of Civil Engineering, v. 25, n. 2 (October 2023).
- (2023): Rheological behavior and key properties of metakaolin and nano-SiO2 blended fibrous self-compacting concretes. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Effect of Using Eccentric Braces with Different Link Lengths on the Seismic Demand of CFST Column-Composite Beam Frames Subjected to Near-Field and Far-Field Earthquakes. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 47, n. 3 (December 2022).
- (2022): Data-driven models for prediction of peak strength of R-CFST circular columns subjected to axial loading. In: Structures, v. 46 (December 2022).
- (2022): GEP-based models for estimating the elastic shear buckling and ultimate loads of cold-formed steel channels with staggered slotted web perforations in shear. In: Structures, v. 46 (December 2022).
- (2022): Combined Effect of Bearing Stiffness of the Base Isolator and Damping Characteristics of the Viscous Damper on the Nonlinear Response of Buildings. In: International Journal of Steel Structures, v. 22, n. 5 (September 2022).
- (2022): Application of Eurocode 4 design provisions and development of new predictive models for eccentrically loaded CFST elliptical columns. In: Journal of Building Engineering, v. 48 (May 2022).
- (2021): Peak strength prediction of reinforced concrete columns in different failure modes based on gene expression programming. In: Advances in Structural Engineering, v. 24, n. 16 (September 2021).
- (2021): Influence of nonlinear fluid viscous dampers in controlling the seismic response of the base-isolated buildings. In: Structures, v. 34 (December 2021).
- (2021): Effect of Using High Damping Rubber Bearings for Seismic Isolation of the Buildings. In: International Journal of Steel Structures, v. 21, n. 5 (September 2021).
- (2021): Optimization and modeling of axial strength of concrete-filled double skin steel tubular columns using response surface and neural-network methods. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Compressive behavior of concrete-filled double skin steel tubular short columns with the elliptical hollow section. In: Journal of Building Engineering, v. 38 (June 2021).
- (2021): Improved shear strength model for exterior reinforced concrete beam-column joints using gene expression programming. In: Engineering Structures, v. 228 (February 2021).
- (2020): Seismic performance evaluation of regular and irregular composite moment resisting frames. In: Latin American Journal of Solids and Structures, v. 17, n. 7 ( 2020).
- (2018): Code based assessment of load capacity of steel tubular columns infilled with recycled aggregate concrete under compression. In: Construction and Building Materials, v. 168 (April 2018).
- (2014): Analytical prediction of available rotation capacity of cold-formed rectangular and square hollow section beams. In: Thin-Walled Structures, v. 77 (April 2014).
- (2015): Predictive models of the flexural overstrength factor for steel thin-walled circular hollow section beams. In: Thin-Walled Structures, v. 94 (September 2015).
- (2014): Prediction of the flexural overstrength factor for steel beams using artificial neural network. In: Steel and Composite Structures, v. 17, n. 3 (September 2014).
- (2014): Seismic fragility analysis of conventional and viscoelastically damped moment resisting frames. In: Earthquakes and Structures, v. 7, n. 3 (September 2014).
- (2015): Nonlinear dynamic response of reinforced concrete building retrofitted with buckling restrained braces. In: Earthquakes and Structures, v. 8, n. 6 (June 2015).
- (2017): Nonlinear Behaviour of Mid-rise Steel Buildings with Gate Braced Frames. In: The Open Civil Engineering Journal, v. 11, n. 1 (December 2017).
- (2019): Effect of friction pendulum bearing properties on behaviour of buildings subjected to seismic loads. In: Soil Dynamics and Earthquake Engineering, v. 125 (October 2019).
- (2019): Axial compression capacity of circular CFST columns transversely strengthened by FRP. In: Engineering Structures, v. 191 (July 2019).
- (2013): A novel formulation of the flexural overstrength factor for steel beams. In: Journal of Constructional Steel Research, v. 90 (November 2013).
- (2011): Effects of eccentric steel bracing systems on seismic fragility curves of mid-rise R/C buildings: A case study. In: Structural Safety, v. 33, n. 1 (January 2011).
- (2008): Seismic fragility assessment of effectiveness of viscous dampers in R/C buildings under scenario earthquakes. In: Structural Safety, v. 30, n. 5 (September 2008).
- (2015): Numerical modeling of time to corrosion induced cover cracking in reinforced concrete using soft-computing based methods. In: Materials and Structures, v. 48, n. 6 (June 2015).
- (2016): Evaluation and modeling of ultimate bond strength of corroded reinforcement in reinforced concrete elements. In: Materials and Structures, v. 49, n. 8 (August 2016).
- (2016): Assessment of shear capacity of adhesive anchors for structures using neural network based model. In: Materials and Structures, v. 49, n. 3 (March 2016).
Structurae cooperates with
