Elke Gruyaert 
- (2024): Report of RILEM TC 281-CCC: A critical review of the standardised testing methods to determine carbonation resistance of concrete. In: Materials and Structures, v. 57, n. 8 (17 September 2024).
- (2024): Self-healing concrete with a bacteria-based or crystalline admixture as healing agent to prevent chloride ingress and corrosion in a marine environment. In: Developments in the Built Environment, v. 19 (October 2024).
- (2024): Enhancing concrete durability in chloride-rich environments through manual application of healing agents. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Modification of Concrete Mix Design with Crystalline Admixture for Self-healing Improvement. In: Journal of Advanced Concrete Technology, v. 22, n. 4 (5 April 2024).
- (2023): Experimental investigation on the bond behaviour of steel reinforcement in self-healing concrete. In: Construction and Building Materials, v. 383 (June 2023).
- (2023): The effect of water absorption distribution of recycled coarse aggregate on the compressive strength distribution of high-performance concrete. In: Materiales de Construccion, v. 73, n. 352 (November 2023).
- (2023): Optimization of concrete mix designs toward the bond properties of steel reinforcement in self-healing concrete by Taguchi method. In: Journal of Building Engineering, v. 76 (October 2023).
- (2012): Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests. In: Cement and Concrete Research, v. 42, n. 1 (January 2012).
- (2008): Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity. In: Cement and Concrete Research, v. 38, n. 10 (October 2008).
- (2022): Comparative study on modelling concrete properties using physical and mechanical properties of recycled coarse aggregate. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Valorization of secondary copper slag as aggregate and cement replacement in ultra-high performance concrete. In: Journal of Building Engineering, v. 54 (August 2022).
- (2021): Implementation and validation of Dewar’s particle packing model for recycled concrete aggregates. In: Construction and Building Materials, v. 294 (August 2021).
- (2022): Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements. In: Materials and Structures, v. 55, n. 3 (19 March 2022).
- (2021): Modelling the effect of coarse recycled concrete aggregate on compressive strength of Portland cement concrete using volume fraction-based approach. In: Construction and Building Materials, v. 309 (November 2021).
- (2020): Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC. In: Materials and Structures, v. 53, n. 6 (16 October 2020).
- (2020): Bond strength between concrete and repair mortar and its relation with concrete removal techniques and substrate composition. In: Construction and Building Materials, v. 230 (January 2020).
- (2019): Novel active crack width control technique to reduce the variation on water permeability results for self-healing concrete. In: Construction and Building Materials, v. 203 (April 2019).
- (2015): Activation of Pozzolanic and Latent-Hydraulic Reactions by Alkalis in Order to Repair Concrete Cracks. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 7 (July 2015).
- (2012): Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation. In: Construction and Building Materials, v. 37 (December 2012).
- (2016): Comparison of different approaches for self-healing concrete in a large-scale lab test. In: Construction and Building Materials, v. 107 (March 2016).
- (2016): Effect of secondary copper slag as cementitious material in ultra-high performance mortar. In: Construction and Building Materials, v. 119 (August 2016).
- (2017): Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material. In: Construction and Building Materials, v. 155 (November 2017).
- (2015): TC 238-SCM: hydration and microstructure of concrete with SCMs. State of the art on methods to determine degree of reaction of SCMs. In: Materials and Structures, v. 48, n. 4 (April 2015).
- (2018): Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method. In: Materials and Structures, v. 51, n. 1 (February 2018).
- (2015): Purdocement: application of alkali-activated slag cement in Belgium in the 1950s. In: Materials and Structures, v. 48, n. 1-2 (January 2015).
- (2013): Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion. In: Materials and Structures, v. 46, n. 1-2 (January 2013).
- (2017): Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2017): Application of encapsulated superabsorbent polymers in cementitious materials for stimulated autogenous healing. In: Smart Materials and Structures, v. 26, n. 10 (October 2017).
- (2016): Self-healing mortar with pH-sensitive superabsorbent polymers: testing of the sealing efficiency by water flow tests. In: Smart Materials and Structures, v. 25, n. 8 (August 2016).
- (2015): Self-repair of thermal cracks in concrete sandwich panels. In: Structural Concrete, v. 16, n. 2 (June 2015).
Structurae cooperates with
