Meng Gong
- (2024): Advancements and Applications of Wood-Based Sandwich Panels in Modern Construction. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2024): Rolling shear failure of CLT transverse layer: AE characterization of damage mechanisms under different test methods. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Mechanical behavior of cross-laminated timber-bamboo short columns with different layup configurations under axial compression. In: Construction and Building Materials, v. 421 (March 2024).
- (2023): Influences of lamination grade and loading waveform on fatigue performance and DOL effect of CLT fabricated from fast-growing Chinese fir. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Effects of pre-heating treatment parameters on dimensional stability and mechanical properties of densified Chinese fir. In: Construction and Building Materials, v. 407 (December 2023).
- (2024): Experimental and nonlinear analytical of the flexural performance of timber-filled steel tubular composite beams. In: Engineering Structures, v. 301 (February 2024).
- (2023): Mechanical properties of mortise-tenon joints reinforced by self-tapping screws with different insertion methods. In: Construction and Building Materials, v. 366 (February 2023).
- (2022): The Dimensional Stability and Bonding Performance of Hybrid CLT Fabricated with Lumber and COSB. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2023): Experimental study on the vibration of poplar LVL orthogonal ribbed box floor. In: Journal of Building Engineering, v. 64 (April 2023).
- (2023): Bonding performance of cross-laminated timber-bamboo composites. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Mechanical performance of mortise-tenon joints reinforced with self-tapping screws. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Low-cycle fatigue life and duration-of-load effect for hybrid CLT fabricated from lumber and OSB. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Shear performance of tongue-and-groove joints for CLT. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Experimental study on bending properties of cross-laminated timber-bamboo composites. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Application of small-diameter round timber as structural members in light frame construction. In: Journal of Asian Architecture and Building Engineering, v. 21, n. 3 (August 2021).
- (2021): On-Site Monitoring of the Moisture Content of Bridge Decks Made of Nail-Laminated Timbers. In: Journal of Structural Engineering (ASCE), v. 147, n. 7 (July 2021).
- (2021): A comprehensive model of vessel anchoring pressure based on machine learning to support the sustainable management of the marine environments of coastal cities. In: Sustainable Cities and Society, v. 72 (September 2021).
- (2021): Structural performance of light wood shear walls built with insulated sheathing panels. In: Engineering Structures, v. 241 (August 2021).
- (2018): Effect of Adsorbate Concentration to Adsorbent Dosage Ratio on the Sorption of Heavy Metals on Soils. In: Journal of Environmental Engineering (ASCE), v. 144, n. 2 (February 2018).
- (2021): Improved fastening designs for bridge decks made of mechanically-laminated timber. In: Construction and Building Materials, v. 266 (January 2021).
- (2020): Shear properties of hybrid CLT fabricated with lumber and OSB. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Embedment strength of smooth dowel-type fasteners in cross-laminated timber. In: Construction and Building Materials, v. 233 (February 2020).
- (2012): Measurement of dynamic modulus of elasticity and damping ratio of wood-based composites using the cantilever beam vibration technique. In: Construction and Building Materials, v. 28 (March 2012).
- (2012): Evaluation of the slip resistance of modified wood decking products. In: Construction and Building Materials, v. 35 (October 2012).
- (2013): Evaluation of the kinetic friction performance of modified wood decking products. In: Construction and Building Materials, v. 40 (March 2013).
- (2014): Influence of number of finger joints per stud on mechanical performance of wood shearwalls. In: Construction and Building Materials, v. 50 (January 2014).
- (2014): Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce. In: Construction and Building Materials, v. 64 (August 2014).
- (2015): Mechanical properties of laminated strand lumber and hybrid cross-laminated timber. In: Construction and Building Materials, v. 101 (December 2015).
- (2017): Planar shear and bending properties of hybrid CLT fabricated with lumber and LVL. In: Construction and Building Materials, v. 151 (October 2017).
- (2018): Development of lightweight overlaid laminated bamboo lumber for structural uses. In: Construction and Building Materials, v. 188 (November 2018).
Structurae cooperates with
