Fuyuan Gong 
- (2025): Long-term deformation and prestress loss of PRC beam under vari-humidity environment: Preliminary experiments and multi-scale simulations. In: Engineering Structures, v. 322 (January 2025).
- (2024): Computational approach to the current and chloride ions distribution of reinforced concrete cathodic protection system. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Investigation of Opening and Closing Water Boundary Conditions on Frost Damage Development in Concrete. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2023): An integrated material-structural analysis of prestress concrete affected by corrosion of non-prestressed reinforcement. In: Advances in Structural Engineering, v. 27, n. 9 (November 2023).
- (2024): Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Fatigue life of RC bridge decks affected by speed and load weight of wheel-type moving loads. In: Structures, v. 64 (June 2024).
- (2024): A complete thermo-poromechanical model for freeze-thaw modification of recycled coarse aggregate considering deterioration of each component. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Characterizations and quantification of freeze-thaw behaviors of recycled brick aggregate concrete. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Dynamic tensile behavior of fiber reinforced materials based on fiber layering modeling. In: Advances in Structural Engineering, v. 27, n. 3 (December 2023).
- (2023): Effect of Original Mix Proportion on Rapid Removing of Attached Mortar for Recycled Concrete Aggregate Through a Freeze-thaw Approach. In: Journal of Advanced Concrete Technology, v. 21, n. 6 (7 June 2023).
- (2023): Investigation on the impact of Thermo-Drying towards Freeze-Thaw cycle processing for recycled coarse aggregate. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Intelligent mix design of recycled brick aggregate concrete based on swarm intelligence. In: Journal of Building Engineering, v. 71 (July 2023).
- (2022): Corrosion-Induced Cracking Pattern Analysis of RC Beam under Sustained Load Considering the Poromechanical Characteristics of Corrosion Products. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2023): Mesoscale discrete analysis of mechanical properties of recycled aggregate concrete based on Voronoi mesh. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Experimental study on time-dependent DC resistivity of cement-based material considering microstructure and ion concentration. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Effects of low temperatures and cryogenic freeze-thaw cycles on concrete mechanical properties: A literature review. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Modeling of path-dependent phase change in sorption and freezing of pore water for cementitious materials. In: Journal of Building Engineering, v. 57 (October 2022).
- (2021): Coupled thermo‐hydro‐mechanical analysis of reinforced concrete beams under the effect of frost damage and sustained load. In: Structural Concrete, v. 22, n. 6 (December 2021).
- (2021): Bond properties of steel angles in concrete filled steel tubes. In: Journal of Constructional Steel Research, v. 182 (July 2021).
- (2017): Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 6 (June 2017).
- (2019): Mesoscale simulation of bond behaviors between concrete and reinforcement under the effect of frost damage with axisymmetric Rigid Body Spring Model. In: Construction and Building Materials, v. 215 (August 2019).
- (2014): Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 7 (July 2014).
- (2014): Experimental investigation of the deformational behavior of the interfacial transition zone (ITZ) in concrete during freezing and thawing cycles. In: Construction and Building Materials, v. 65 (August 2014).
- (2017): Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): Estimation of ice formation in mortar saturated with sodium chloride solutions. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Mesoscale simulation of fatigue behavior of concrete materials damaged by freeze-thaw cycles. In: Construction and Building Materials, v. 144 (July 2017).
- (2015): Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress. In: Journal of Advanced Concrete Technology, v. 13, n. 6 ( 2015).
- (2013): Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles. In: Journal of Advanced Concrete Technology, v. 11, n. 12 ( 2013).
- (2013): Meso-scale Mechanical Model for Mortar Deformation under Freeze Thaw Cycles. In: Journal of Advanced Concrete Technology, v. 11, n. 2 ( 2013).
- (2016): Estimation of Ice Content in Mortar Based on Electrical Measurements under Freeze-Thaw Cycle. In: Journal of Advanced Concrete Technology, v. 14, n. 2 ( 2016).
Structurae cooperates with
