Grzegorz Ludwik Golewski 
- (2024): Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete. In: Infrastructures, v. 9, n. 10 (8 October 2024).
- (2024): Influence of water glass modulus and alkali content on the properties of alkali-activated thermally activated recycled cement. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Mechanical properties and hydration mechanism of nano-silica modified alkali-activated thermally activated recycled cement. In: Journal of Building Engineering, v. 98 (December 2024).
- (2023): Effect of Coarse Aggregate Grading on Mechanical Parameters and Fracture Toughness of Limestone Concrete. In: Infrastructures, v. 8, n. 8 (31 July 2023).
- (2023): Assessing of water absorption on concrete composites containing fly ash up to 30 % in regards to structures completely immersed in water. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): The Phenomenon of Cracking in Cement Concretes and Reinforced Concrete Structures: The Mechanism of Cracks Formation, Causes of Their Initiation, Types and Places of Occurrence, and Methods of Detection—A Review. In: Buildings, v. 13, n. 3 (26 February 2023).
- (2022): An extensive investigations on fracture parameters of concretes based on quaternary binders (QBC) by means of the DIC technique. In: Construction and Building Materials, v. 351 (October 2022).
- (2021): Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – Using the crack tip tracking (CTT) method – In the fracture toughness examinations under Mode II, through digital image correlation. In: Construction and Building Materials, v. 296 (August 2021).
- (2022): The Specificity of Shaping and Execution of Monolithic Pocket Foundations (PF) in Hall Buildings. In: Buildings, v. 12, n. 2 (18 January 2022).
- (2021): Strengthening the very early-age structure of cementitious composites with coal fly ash via incorporating a novel nanoadmixture based on C-S-H phase activators. In: Construction and Building Materials, v. 312 (December 2021).
- (2017): Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading. In: Structural Engineering and Mechanics, v. 62, n. 1 (April 2017).
- (2019): A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads. In: Composite Structures, v. 223 (September 2019).
- (2018): An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives. In: Composite Structures, v. 200 (September 2018).
- (2018): Effect of curing time on the fracture toughness of fly ash concrete composites. In: Composite Structures, v. 185 (February 2018).
- (2017): Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture. In: Journal of Civil Engineering and Management, v. 23, n. 5 (May 2017).
- (2019): Estimation of the optimum content of fly ash in concrete composite based on the analysis of fracture toughness tests using various measuring systems. In: Construction and Building Materials, v. 213 (July 2019).
- (2019): The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: Consideration of technological and ecological benefits. In: Construction and Building Materials, v. 197 (February 2019).
Structurae cooperates with
