Kamel Ghali
- (2024): Enhancing thermal comfort of older adults during extreme weather: Combined personal comfort system and ventilated vest. In: Energy and Buildings, v. 318 (September 2024).
- (2024): Evaluating thermal response when elderly people using local cooling devices: Correlation among overall and local thermal sensation with skin temperature. In: Building and Environment, v. 251 (March 2024).
- (2023): Enhancing sustainability and resilience of elderly dwellings: Optimized refurbishing parameters and air conditioning operation. In: Energy and Buildings, v. 289 (June 2023).
- (2022): Downward piston ventilation assisted with a localized - Chair exhaust for mitigation of pathogen transport in educational spaces. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Effective mitigation of cross-contamination in classroom conditioned by intermittent air jet cooling with use of portable air cleaners. In: Building and Environment, v. 219 (July 2022).
- (2022): Diurnal Selective Radiative Cooling Impact in Mitigating Urban Heat Island Effect. In: Sustainable Cities and Society, v. 83 (August 2022).
- (2021): The effectiveness of evaporative cooling vest with ventilation fans on the thermal state of persons with paraplegia during exercise. In: Building and Environment, v. 206 (December 2021).
- (2017): Case Study of Trombe Wall Inducing Natural Ventilation through Cooled Basement Air to Meet Space Cooling Needs. In: Journal of Energy Engineering, v. 143, n. 2 (April 2017).
- (2021): Effect of individually controlled personalized ventilation on cross-contamination due to respiratory activities. In: Building and Environment, v. 194 (May 2021).
- (2021): Evaluation of different personalized ventilation air terminal devices: Inhalation vs. clothing-mediated exposures. In: Building and Environment, v. 192 (April 2021).
- (2018): Effectiveness of contaminant confinement in office spaces equipped with ceiling personalized ventilation system. In: Building Simulation, v. 11, n. 4 (April 2018).
- (2020): Development of heat stress charts for older people under indoor environmental conditions. In: Energy and Buildings, v. 224 (October 2020).
- (2014): Effective desiccant dehumidification system with two-stage evaporative cooling for hot and humid climates. In: Energy and Buildings, v. 68 (January 2014).
- (2015): Design charts for sizing CC / DV system aided with personalized evaporative cooler to the desired thermal comfort. In: Energy and Buildings, v. 86 (January 2015).
- (2016): Coaxial personalized ventilation system and window performance for human thermal comfort in asymmetrical environment. In: Energy and Buildings, v. 111 (January 2016).
- (2016): Effect of shifts from occupant design position on performance of ceiling personalized ventilation assisted with desk fan or chair fans. In: Energy and Buildings, v. 117 (April 2016).
- (2017): Cooling vest with optimized PCM arrangement targeting torso sensitive areas that trigger comfort when cooled for improving human comfort in hot conditions. In: Energy and Buildings, v. 139 (March 2017).
- (2020): The effect of human breathing on the effectiveness of intermittent personalized ventilation coupled with mixing ventilation. In: Building and Environment, v. 174 (May 2020).
- (2020): Coupled CFD and particle resuspension models under combined effect of mechanical and aerodynamic disturbances. In: Building and Environment, v. 169 (February 2020).
- (2019): Effect of flow disturbance induced by walking on the performance of personalized ventilation coupled with mixing ventilation. In: Building and Environment, v. 160 (August 2019).
- (2019): Comparison of removal effectiveness of mixed versus displacement ventilation during vacuuming session. In: Building and Environment, v. 155 (May 2019).
- (2018): Effectiveness of intermittent personalized ventilation assisting a chilled ceiling for enhanced thermal comfort and acceptable indoor air quality. In: Building and Environment, v. 144 (October 2018).
- (2018): Effectiveness of intermittent personalized ventilation in protecting occupant from indoor particles. In: Building and Environment, v. 128 (January 2018).
- (2016): The effect of PCM placement on torso cooling vest for an active human in hot environment. In: Building and Environment, v. 107 (October 2016).
- (2016): Coupling CFD and analytical modeling for investigation of monolayer particle resuspension by transient flows. In: Building and Environment, v. 105 (August 2016).
- (2015): Displacement ventilation zonal model for particle distribution resulting from high momentum respiratory activities. In: Building and Environment, v. 90 (August 2015).
- (2015): Chair fan-enhanced displacement ventilation for high IAQ: Effects on particle inhalation and stratification height. In: Building and Environment, v. 84 (January 2015).
- (2008): Effect of stove asymmetric radiation field on thermal comfort using a multisegmented bioheat model. In: Building and Environment, v. 43, n. 7 (July 2008).
- (2020): Daytime radiative cooling: To what extent it enhances office cooling system performance in comparison to night cooling in semi-arid climate?. In: Journal of Building Engineering, v. 28 (March 2020).
- (2019): Evaluating performance of hybrid PCM-fan and hybrid PCM-desiccant vests in moderate and hot climates. In: Journal of Building Engineering, v. 22 (March 2019).
Structurae cooperates with
