Seyed Hamidreza Ghaffar 
- (2024): Comparative analysis of ternary blended cement with clay and engineering brick aggregate for high-performance 3D printing. In: Developments in the Built Environment, v. 20 (December 2024).
- (2024): Influence of carbon nanotubes on printing quality and mechanical properties of 3D printed cementitious materials. In: Developments in the Built Environment, v. 18 (April 2024).
- (2024): Durability Enhancement of Concrete with Recycled Concrete Aggregate: The Role of Nano-ZnO. In: Buildings, v. 14, n. 2 (1 February 2024).
- (2023): Overcoming Barriers to Implementing Building Information Modelling in Kuwait’s Ministry of Public Works: A Framework for Sustainable Construction. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Alkali activated materials with recycled unplasticised polyvinyl chloride aggregates for sand replacement. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Upcycling end-of-life bricks in high-performance one-part alkali-activated materials. In: Developments in the Built Environment, v. 16 (December 2023).
- (2023): Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties. In: Developments in the Built Environment, v. 16 (December 2023).
- (2021): Microstructural, Mechanical and Physical Assessment of Portland Cement Concrete Pavement Modified by Sodium Acetate under Various Curing Conditions. In: Infrastructures, v. 6, n. 8 (August 2021).
- (2023): Towards development of sustainable lightweight 3D printed wall building envelopes – Experimental and numerical studies. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): A review of 3D printing low-carbon concrete with one-part geopolymer: Engineering, environmental and economic feasibility. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Mechanical and physical characteristics of alkali- activated mortars incorporated with recycled polyvinyl chloride and rubber aggregates. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Performance of magnetite-based stone mastic asphalt (SMA) as a superior surface course material. In: Construction and Building Materials, v. 322 (March 2022).
- (2022): Properties of additively manufactured geopolymer incorporating mineral wollastonite microfibers. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Introducing a novel concept of wick drainage in masonry structures. In: Journal of Building Engineering, v. 51 (July 2022).
- (2021): 3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties. In: Journal of Building Engineering, v. 44 (December 2021).
- (2020): High performance cementitious nanocomposites: The effectiveness of nano-Graphite (nG). In: Construction and Building Materials, v. 259 (October 2020).
- (2020): Wheat straw biorefinery for agricultural waste valorisation. In: Green Materials, v. 8, n. 2 (June 2020).
- (2021): The effects of Nano-Fe2O3 on the mechanical, physical and microstructure of cementitious composites. In: Construction and Building Materials, v. 266 (January 2021).
- (2021): Resistance of hydrophobic concrete with different moisture contents to advanced freeze–thaw cycles. In: Structural Concrete, v. 22 (January 2021).
- (2020): The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites. In: Construction and Building Materials, v. 250 (July 2020).
- (2020): Investigation of the interfacial bonding between flax/wool twine and various cementitious matrices in mortar composites. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete. In: Construction and Building Materials, v. 178 (July 2018).
- (2020): Development of low absorption and high-resistant sodium acetate concrete for severe environmental conditions. In: Construction and Building Materials, v. 230 (January 2020).
- (2018): Additive manufacturing technology and its implementation in construction as an eco-innovative solution. In: Automation in Construction, v. 93 (September 2018).
Structurae cooperates with
