Mette Geiker 
- (2012): E-modulus evolution and its relation to solids formation of pastes from commercial cements. In: Cement and Concrete Research, v. 42, n. 7 (July 2012).
- (2014): A study of the water vapor sorption isotherms of hardened cement pastes: Possible pore structure changes at low relative humidity and the impact of temperature on isotherms. In: Cement and Concrete Research, v. 56 (February 2014).
- (2016): Early age strength increase of fly ash blended cement by a ternary hardening accelerating admixture. In: Cement and Concrete Research, v. 81 (March 2016).
- (2023): Impact of cracks on distribution of chloride-induced reinforcement corrosion. In: Materials and Structures, v. 56, n. 1 (30 January 2023).
- (2021): 25 years of field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion. In: Construction and Building Materials, v. 286 (June 2021).
- (1999): Sustainable design and maintenance of concrete structures. Presented at: IABSE Symposium: Structures for the Future - The Search for Quality, Rio de Janeiro, Brazil, 25-27 August 1999.
- (2020): Corrosion of steel in carbonated concrete: mechanisms, practical experience, and research priorities – a critical review by RILEM TC 281-CCC. In: RILEM Technical Letters, v. 5 (June 2020).
- (2020): Probabilistic Design of Sustainable Reinforced Concrete Infrastructure Repairs Using SIPmath. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2020): Recommended practice for reporting experimental data produced from studies on corrosion of steel in cementitious systems. In: RILEM Technical Letters, v. 4 (February 2020).
- (2018): Multi-scale and multi-physics deterioration modelling for design and assessment of reinforced concrete structures. In: RILEM Technical Letters, v. 2 (April 2018).
- (2020): A numerical investigation of the cracking behaviour of reinforced-concrete tie elements. In: Magazine of Concrete Research, v. 72, n. 3 (February 2020).
- (2020): Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (February 2020).
- (2019): Modified cracked membrane model for consistent crack width predictions of reinforced concrete structures subjected to in-plane loading. In: Engineering Structures, v. 196 (October 2019).
- (2018): Experimental and theoretical investigation of crack width calculation methods for RC ties. In: Structural Concrete, v. 19, n. 5 (October 2018).
- (2012): A review: Self-healing in cementitious materials and engineered cementitious composite as a self-healing material. In: Construction and Building Materials, v. 28 (March 2012).
- (2014): Application of water vapor sorption measurements for porosity characterization of hardened cement pastes. In: Construction and Building Materials, v. 66 (September 2014).
- (2007): Parallel-plate Rheometer Calibration Using Oil and Computer Simulation. In: Journal of Advanced Concrete Technology, v. 5, n. 3 ( 2007).
- (2011): The design of an instrumented rebar for assessment of corrosion in cracked reinforced concrete. In: Materials and Structures, v. 44, n. 7 (August 2011).
- (2007): Prediction of chloride ingress and binding in cement paste. In: Materials and Structures, v. 40, n. 4 (May 2007).
- (2013): Concrete cover cracking due to uniform reinforcement corrosion. In: Materials and Structures, v. 46, n. 11 (November 2013).
- (2014): Observations on the electrical resistivity of steel fibre reinforced concrete. In: Materials and Structures, v. 47, n. 1-2 (January 2014).
- (2017): Influence of Mechanically Induced Cracking on Chloride Ingress in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
Structurae cooperates with
