0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Leroy Gardner ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Zhao, Ou / Gardner, Leroy / Young, Ben (2016): Structural performance of stainless steel circular hollow sections under combined axial load and bending – Part 2: Parametric studies and design. In: Thin-Walled Structures, v. 101 (April 2016).

    https://doi.org/10.1016/j.tws.2015.12.005

  2. Zhang, Ruizhi / Gardner, Leroy / Buchanan, Craig / Matilainen, Ville-Pekka / Piili, Heidi / Salminen, Antti (2021): Testing and analysis of additively manufactured stainless steel CHS in compression. In: Thin-Walled Structures, v. 159 (February 2021).

    https://doi.org/10.1016/j.tws.2020.107270

  3. Meng, Xin / Gardner, Leroy (2020): Testing of hot-finished high strength steel SHS and RHS under combined compression and bending. In: Thin-Walled Structures, v. 148 (March 2020).

    https://doi.org/10.1016/j.tws.2019.106262

  4. Guo, Xi / Kyvelou, Pinelopi / Ye, Jun / Gardner, Leroy (2023): Structural Response of Wire Arc Additively Manufactured Steel T‐stub Connections. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2436

  5. Kyvelou, Pinelopi / Spinasa, Athina / Gardner, Leroy (2023): Testing and analysis of optimised wire arc additively manufactured steel trusses. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2500

  6. Wang, Fangying / Young, Ben / Gardner, Leroy (2023): Testing, numerical analysis and design of CFDST cross-sections with square stainless steel outer tubes in bending. In: Journal of Constructional Steel Research, v. 211 (December 2023).

    https://doi.org/10.1016/j.jcsr.2023.108125

  7. Su, Andi / Wang, Yajin / Rasmussen, Kim J. R. / Gardner, Leroy (2023): Structural performance and design of S960 ultra-high strength steel non-slender welded I-sections subjected to combined loading. In: Engineering Structures, v. 293 (October 2023).

    https://doi.org/10.1016/j.engstruct.2023.116593

  8. Behzadi-Sofiani, Behnam / Wadee, M. Ahmer / Gardner, Leroy (2023): Testing, FE modelling and design of pin-ended stainless steel equal-leg angle section columns and beam–columns. In: Journal of Constructional Steel Research, v. 208 (September 2023).

    https://doi.org/10.1016/j.jcsr.2023.107973

  9. Zhang, Ruizhi / Gardner, Leroy / Amraei, Mohsen / Buchanan, Craig / Piili, Heidi (2023): Testing and Analysis of Additively Manufactured Stainless Steel Corrugated Cylindrical Shells in Compression. In: Journal of Engineering Mechanics (ASCE), v. 149, n. 4 (April 2023).

    https://doi.org/10.1061/jenmdt.emeng-6841

  10. Guo, Xi / Kyvelou, Pinelopi / Ye, Jun / Teh, Lip H. / Gardner, Leroy (2022): Structural Response of Wire Arc Additively Manufactured Steel Bolted Connections under Single Shear. In: ce/papers, v. 5, n. 4 (September 2022).

    https://doi.org/10.1002/cepa.1753

  11. Kucukler, Merih / Gardner, Leroy (2022): Structural Response and Design of Austenitic Stainless Steel I‐section Beam‐columns Undergoing Flexural‐Torsional Buckling. In: ce/papers, v. 5, n. 4 (September 2022).

    https://doi.org/10.1002/cepa.1763

  12. Wang, Zhongxing / Li, Mengyu / Han, Qinghua / Yun, Xiang / Zhou, Kan / Gardner, Leroy / Mazzolani, Federico M. (2022): Structural fire behaviour of aluminium alloy structures: Review and outlook. In: Engineering Structures, v. 268 (October 2022).

    https://doi.org/10.1016/j.engstruct.2022.114746

  13. Zhong, Yukai / Sun, Yao / Zhao, Ou / Gardner, Leroy (2022): Structural Response and Residual Capacity of S700 High-Strength Steel CHS Columns after Exposure to Elevated Temperatures. In: Journal of Structural Engineering (ASCE), v. 148, n. 6 (June 2022).

    https://doi.org/10.1061/(asce)st.1943-541x.0003341

  14. Behzadi-Sofiani, Behnam / Gardner, Leroy / Wadee, M. Ahmer (2022): Testing, numerical analysis and design of stainless steel equal-leg angle section beams. In: Structures, v. 37 (March 2022).

    https://doi.org/10.1016/j.istruc.2022.01.060

  15. Kyvelou, Pinelopi / Huang, Cheng / Gardner, Leroy / Buchanan, Craig (2021): Structural Testing and Design of Wire Arc Additively Manufactured Square Hollow Sections. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (December 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0003188

  16. Wang, Fangying / Young, Ben / Gardner, Leroy (2021): Testing and numerical modelling of circular CFDST cross-sections with stainless steel outer tubes in bending. In: Engineering Structures, v. 247 (November 2021).

    https://doi.org/10.1016/j.engstruct.2021.113170

  17. Meng, Xin / Gardner, Leroy (2021): Testing, modelling and design of normal and high strength steel tubular beam-columns. In: Journal of Constructional Steel Research, v. 183 (August 2021).

    https://doi.org/10.1016/j.jcsr.2021.106735

  18. dos Santos, João de J. / Liang, Yating / Zhao, Ou / de Andrade, Sebastião A. L. / de Lima, Luciano R. O. / Gardner, Leroy / Vellasco, Pedro C. G. da S. (2021): Testing and design of stainless steel staggered bolted connections. In: Engineering Structures, v. 231 (March 2021).

    https://doi.org/10.1016/j.engstruct.2020.111707

  19. Xing, Zhe / Zhao, Ou / Kucukler, Merih / Gardner, Leroy (2021): Testing of stainless steel I-section columns in fire. In: Engineering Structures, v. 227 (January 2021).

    https://doi.org/10.1016/j.engstruct.2020.111320

  20. Yun, Xiang / Wang, Zhongxing / Gardner, Leroy (2020): Structural performance and design of hot-rolled steel SHS and RHS under combined axial compression and bending. In: Structures, v. 27 (October 2020).

    https://doi.org/10.1016/j.istruc.2020.06.038

  21. Gardner, Leroy / Kyvelou, Pinelopi / Herbert, Gordon / Buchanan, Craig (2020): Testing and initial verification of the world's first metal 3D printed bridge. In: Journal of Constructional Steel Research, v. 172 (September 2020).

    https://doi.org/10.1016/j.jcsr.2020.106233

  22. Fieber, Andreas / Gardner, Leroy / Macorini, Lorenzo (2020): Structural steel design using second-order inelastic analysis with strain limits. In: Journal of Constructional Steel Research, v. 168 (May 2020).

    https://doi.org/10.1016/j.jcsr.2020.105980

  23. Zhao, Ou / Gardner, Leroy / Young, Ben (2016): Structural performance of stainless steel circular hollow sections under combined axial load and bending – Part 1: Experiments and numerical modelling. In: Thin-Walled Structures, v. 101 (April 2016).

    https://doi.org/10.1016/j.tws.2015.12.003

  24. Buchanan, Craig / Matilainen, Ville-Pekka / Salminen, Antti / Gardner, Leroy (2017): Structural performance of additive manufactured metallic material and cross-sections. In: Journal of Constructional Steel Research, v. 136 (September 2017).

    https://doi.org/10.1016/j.jcsr.2017.05.002

  25. Zhao, Ou / Afshan, Sheida / Gardner, Leroy (2017): Structural response and continuous strength method design of slender stainless steel cross-sections. In: Engineering Structures, v. 140 (June 2017).

    https://doi.org/10.1016/j.engstruct.2017.02.044

  26. Zhao, Ou / Gardner, Leroy / Young, Ben (2016): Testing and numerical modelling of austenitic stainless steel CHS beam–columns. In: Engineering Structures, v. 111 (March 2016).

    https://doi.org/10.1016/j.engstruct.2015.12.035

  27. Su, Mei-Ni / Young, Ben / Gardner, Leroy (2014): Testing and Design of Aluminum Alloy Cross Sections in Compression. In: Journal of Structural Engineering (ASCE), v. 140, n. 9 (September 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0000972

  28. Gosaye, Jonathan / Gardner, Leroy / Wadee, M. Ahmer / Ellen, Murray E. (2014): Tensile performance of prestressed steel elements. In: Engineering Structures, v. 79 (November 2014).

    https://doi.org/10.1016/j.engstruct.2014.08.009

  29. Ashraf, Mahmud / Gardner, Leroy / Nethercot, David A. (2008): Structural Stainless Steel Design: Resistance Based on Deformation Capacity. In: Journal of Structural Engineering (ASCE), v. 134, n. 3 (March 2008).

    https://doi.org/10.1061/(asce)0733-9445(2008)134:3(402)

  30. Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A. (2017): Testing and Analysis of Composite Cold-Formed Steel and Wood−Based Flooring Systems. In: Journal of Structural Engineering (ASCE), v. 143, n. 11 (November 2017).

    https://doi.org/10.1061/(asce)st.1943-541x.0001885

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine