Xiaojian Gao 
- (2024): Application of sisal fiber powder in ultra-high performance concrete: A renewable material for mitigating autogenous shrinkage. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Evolution and prediction of static and seismic properties in diatomite-incorporated concrete members exposed to freeze-thaw cycles. In: Structures, v. 62 (April 2024).
- (2023): Influence of CO2 Curing and Autoclaved Aerated Concrete Powder on Sulfate Attack of Cement Paste at Low Temperature. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (May 2023).
- (2022): Influence of self-ignition coal gangue on properties of foam concrete with steam curing. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): Experimental study on multi-component corrosion inhibitor for steel bar in chloride environment. In: Construction and Building Materials, v. 313 (December 2021).
- (2021): Fiber alignment and its effect on mechanical properties of UHPC: An overview. In: Construction and Building Materials, v. 296 (August 2021).
- (2021): Influence of fiber alignment and length on flexural properties of UHPC. In: Construction and Building Materials, v. 290 (July 2021).
- (2022): Effect of carbonation curing on durability of cement mortar incorporating carbonated fly ash subjected to Freeze-Thaw and sulfate attack. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): Correlation analysis and statistical assessment of early hydration characteristics and compressive strength for multi-composite cement paste. In: Construction and Building Materials, v. 310 (December 2021).
- (2022): Acceleration mechanism of nonisothermal microwave heating on strength development of mortar. In: Composite Structures, v. 279 (January 2022).
- (2021): Effects of combined accelerating admixtures on mechanical strength and microstructure of cement mortar. In: Construction and Building Materials, v. 304 (October 2021).
- (2020): Corrosion resistance of wollastonite modified magnesium phosphate cement paste exposed to freeze-thaw cycles and acid-base corrosion. In: Case Studies in Construction Materials, v. 13 (December 2020).
- (2021): Influence of silica fume, metakaolin & SBR latex on strength and durability performance of pervious concrete. In: Construction and Building Materials, v. 275 (March 2021).
- (2020): Electrical and piezoresistive properties of carbon nanofiber cement mortar under different temperatures and water contents. In: Construction and Building Materials, v. 265 (December 2020).
- (2021): Influence of Rheological Behavior of Mortar Matrix on Fresh Concrete Segregation and Bleeding. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 3 (June 2021).
- (2020): Analysis of correlation between hydration heat release and compressive strength for blended cement pastes. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Hydration and mechanical properties of UHPC matrix containing limestone and different levels of metakaolin. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Hydration mechanism and early frost resistance of calcium sulfoaluminate cement concrete. In: Construction and Building Materials, v. 239 (April 2020).
- (2020): Improvement of viscosity-modifying agents on air-void system of vibrated concrete. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Effects of salt freeze-thaw cycles and cyclic loading on the piezoresistive properties of carbon nanofibers mortar. In: Construction and Building Materials, v. 177 (July 2018).
- (2018): Effects of autoclave curing and fly ash on mechanical properties of ultra-high performance concrete. In: Construction and Building Materials, v. 158 (January 2018).
- (2020): Effect of pulverized fuel ash, ground granulated blast-furnace slag and CO2 curing on performance of magnesium oxysulfate cement. In: Construction and Building Materials, v. 230 (January 2020).
- (2019): Influence of formwork wall effect on fiber orientation of UHPC with two casting methods. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Influence of Poker Vibration on Aggregate Settlement in Fresh Concrete with Variable Rheological Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 7 (July 2019).
- (2019): Influence of mineral admixtures on carbonation curing of cement paste. In: Construction and Building Materials, v. 212 (July 2019).
- (2019): Effects of Rheological Performance, Antifoaming Admixture, and Mixing Procedure on Air Bubbles and Strength of UHPC. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 4 (April 2019).
- (2017): The influence of rheological parameters of cement paste on the dispersion of carbon nanofibers and self-sensing performance. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Influence of rheological properties of cement mortar on steel fiber distribution in UHPC. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Influence of rice husk ash on strength and permeability of ultra-high performance concrete. In: Construction and Building Materials, v. 149 (September 2017).
- (2018): Improvement effect of steel fiber orientation control on mechanical performance of UHPC. In: Construction and Building Materials, v. 188 (November 2018).
Structurae cooperates with
