Qiang Gao 
- (2024): Experimental investigation on reducing the interface adhesion of concrete and formwork via electroosmosis approach. In: Developments in the Built Environment, v. 20 (December 2024).
- (2024): A method for static analysis of multistage cyclic structure based on group theory and two-stage Guyan reduction. In: Computers & Structures, v. 305 (December 2024).
- (2025): Fabrication and multiscale heat transfer modeling of high thermal conductivity Cf/HfB2-SiC composites. In: Composite Structures, v. 351 (January 2025).
- (2024): A Novel Method for Investigating Ice-substrate Interfacial Rheology and Long-term Adfreeze Strength through Loading-Unloading Creep Test. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Frosting characteristics of microchannel heat exchangers: Parametric studies and correlation development. In: Journal of Building Engineering, v. 90 (August 2024).
- (2016): Crushing analysis and multiobjective crashworthiness optimization of foam-filled ellipse tubes under oblique impact loading. In: Thin-Walled Structures, v. 100 (March 2016).
- (2024): Multi-scale concurrent topology optimization of cellular structures with multiple microstructures for minimizing dynamic response in the time domain. In: Composite Structures, v. 338 (June 2024).
- (2024): Experimental study on environmental chemical effect and purification treatment of waste slurry in horizontal directional drilling. In: Tunnelling and Underground Space Technology, v. 145 (March 2024).
- (2024): A novel 3D polygonal double-negative mechanical metamaterial with negative stiffness and negative Poisson’s ratio. In: Composite Structures, v. 331 (March 2024).
- (2023): Experimental study on the engineering characteristics of modified silt in the Yellow River alluvial plain. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Review on zero waste strategy for urban construction and demolition waste: Full component resource utilization approach for sustainable and low-carbon. In: Construction and Building Materials, v. 395 (September 2023).
- (2023): A rotating auxetic energy harvester for vehicle wheels. In: Engineering Structures, v. 288 (August 2023).
- (2023): Experimental study on wall-protecting mud modification of super-long bored pile in the alluvial plain region of the Yellow River. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Influencing Factors of Soil Microbial Communities in Different Ecological Zones in the Golden Maize Belt in China: Environmental and Biochemical Factors. In: Journal of Environmental Engineering (ASCE), v. 148, n. 10 (October 2022).
- (2022): Novel superhydrophobic NIR reflective coatings based on Montmorillonite/SiO2 composites for Energy-saving building. In: Construction and Building Materials, v. 326 (April 2022).
- (2021): A strong magnesium oxychloride cement wood adhesive via organic–inorganic hybrid. In: Construction and Building Materials, v. 297 (August 2021).
- (2019): Geomechanical Modeling of the Stability of Deep Tunnel in Dingji Coal Mine in China. In: Geotechnical and Geological Engineering, v. 37, n. 4 (6 March 2019).
- (2022): Effective elastic properties of irregular auxetic structures. In: Composite Structures, v. 287 (May 2022).
- (2021): Experimental study on factors influencing the connection performance of grouted welded sleeves under uniaxial tensile loads. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): A novel T-shaped sensor cluster for acoustic source localization. In: Structural Health Monitoring, v. 21, n. 2 (May 2021).
- (2021): State-space based discretize-then-differentiate adjoint sensitivity method for transient responses of non-viscously damped systems. In: Computers & Structures, v. 250 (July 2021).
- (2014): Rational finite element method for plane orthotropic elastic problems. In: Structural Engineering and Mechanics, v. 51, n. 6 (September 2014).
- (2014): Experimental study on concentration change of spray solution used for a novel non-frosting air source heat pump system. In: Energy and Buildings, v. 68 (January 2014).
- (2020): Antifouling energy-efficient coatings based on BiOClxBr1−x microflowers: NIR reflective property and superhydrophobicity. In: Construction and Building Materials, v. 257 (October 2020).
- (2020): A stick-slip linear piezoelectric actuator with mode conversion flexible hinge driven by symmetrical waveform. In: Smart Materials and Structures, v. 29, n. 5 (27 March 2020).
- (2019): Geo-mechanical model test on the collaborative bearing effect of rock-support system for deep tunnel in complicated rock strata. In: Tunnelling and Underground Space Technology, v. 91 (September 2019).
- (2019): Research on Failure Mechanism and Parameter Sensitivity of Zonal Disintegration in Deep Tunnel. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): Sorption and Photocatalytic Degradation of Trichlorfon by Foam Concrete Blended with Nitrogen-Doped Titanium Dioxide. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 5 (May 2016).
- (2015): Effect of flame retardant treatment on dimensional stability and thermal degradation of wood. In: Construction and Building Materials, v. 75 (January 2015).
- (2009): BrIM for project delivery and the life-cycle: state of the art. In: Bridge Structures, v. 5, n. 4 (December 2009).
Structurae cooperates with
