Lei Gao 
- (2025): Analysis of the Theoretical Calculation Model for Lateral Load of a Snowflake Pile in Soft Clay. In: International Journal of Geomechanics, v. 25, n. 4 (April 2025).
- (2025): Experimental and numerical investigation on global-stability of welded BS700 high-strength steel beams. In: Journal of Constructional Steel Research, v. 227 (April 2025).
- : Identifying the key factors of intermodal travel using interpretative ensemble learning. In: International Journal of Transportation Science and Technology.
- (2024): Interface Fatigue Test of Hybrid-Bonded Fiber-Reinforced Plastic-Reinforced Concrete Specimen. In: Buildings, v. 14, n. 10 (8 October 2024).
- (2024): Electromagnetic wave absorption characteristics of silicon carbide modified concrete applied to protective engineering. In: Case Studies in Construction Materials, v. 20 (July 2024).
-
(2023): Explosion responses of movable
- (2023): Dynamic Response of a Box Multistage Stiffened Beam under the Coupling of Vehicle Load and Air Blast Load. In: Buildings, v. 13, n. 11 (26 October 2023).
- (2023): Influence of anchor design parameters on flexural performance of hybrid bonded-fiber reinforced polymer strengthened reinforced concrete beams. In: Structures, v. 48 (February 2023).
- (2023): Continuous crack detection using the combination of dynamic mode decomposition and connected component-based filtering method. In: Structures, v. 49 (March 2023).
- (2022): Action mechanism for improving water impermeability of concrete surface based on deep penetrating sealer. In: Construction and Building Materials, v. 322 (March 2022).
- (2022): Aging performance of high viscosity modified asphalt under complex heat-light-water coupled conditions. In: Construction and Building Materials, v. 325 (March 2022).
- (2021): Flexural design of reinforced concrete structures strengthened with hybrid bonded FRP. In: Composite Structures, v. 269 (August 2021).
- (2021): Chinese code methods for liquefaction potential assessment based on standard penetration test: An extension. In: Soil Dynamics and Earthquake Engineering, v. 144 (May 2021).
- (2020): Evaluation of cooling effect and pavement performance for thermochromic material modified asphalt mixtures under solar radiation. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Improvement of acoustic model and structural optimization design of porous asphalt concrete based on meso-structure research. In: Construction and Building Materials, v. 265 (December 2020).
- (2006): Drag reduction of a disk with an upstream rod. In: Wind & Structures, v. 9, n. 3 (June 2006).
- (2020): Laboratory evaluation of rutting resistance for asphalt binders and mixtures modified with different thermochromic microcapsule powders. In: Construction and Building Materials, v. 252 (August 2020).
- (2018): Evaluation of pavement performance for reclaimed asphalt materials in different layers. In: Construction and Building Materials, v. 159 (January 2018).
- (2009): Load-carrying capacity of high-strength steel box-sections I: Stub columns. In: Journal of Constructional Steel Research, v. 65, n. 4 (April 2009).
- (2014): Influence on Compaction of Cold Recycled Mixes with Emulsions Using the Superpave Gyratory Compaction. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 11 (November 2014).
- (2011): Experimental Investigation of the Desiccation Cracking Behavior of Soil Layers during Drying. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 6 (June 2011).
- (2019): Correction of texture depth of porous asphalt pavement based on CT scanning technique. In: Construction and Building Materials, v. 200 (March 2019).
- (2019): Experimental and numerical study on the interfacial bonding characteristics of FRP-to-concrete joints with mechanical fastening. In: Construction and Building Materials, v. 199 (February 2019).
- (2014): Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions. In: Construction and Building Materials, v. 61 (June 2014).
- (2015): Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography. In: Construction and Building Materials, v. 84 (June 2015).
- (2016): Evaluation of fatigue behavior in cold recycled mixture using digital image correlation method. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis. In: Construction and Building Materials, v. 136 (April 2017).
- (2017): Laboratory investigation of rutting performance for multilayer pavement with fiber Bragg gratings. In: Construction and Building Materials, v. 154 (November 2017).
- (2015): Experimental Study of Nanometer Magnesium Oxide-Modified Clay. In: Soil Mechanics and Foundation Engineering, v. 52, n. 4 (September 2015).
Structurae cooperates with
