Furong Gao 
- (2023): Mechanism of nano-SiO2 internal generation for modification of cement-based materials. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Effect of anti-washout admixture on the compressive strength of alkali-activated underwater non-dispersible concrete. In: Magazine of Concrete Research, v. 75, n. 18 (September 2023).
- (2023): Effect of acid activation on the mechanical and shrinkage properties of cement-based materials. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Study on the deterioration mechanism of alkali dissolution of concrete mixed with Na2SO4 in external water sources. In: Construction and Building Materials, v. 356 (November 2022).
- (2021): Improving early compressive strength of precast concrete by increasing active silicon content. In: Structural Concrete, v. 23, n. 6 (December 2021).
- (2021): High temperature resistance of a phase change cementitious material at elevated temperatures. In: Construction and Building Materials, v. 292 (July 2021).
- (2022): Dehydrated cement paste improves compressive strength of alkali-activated coal gangue. In: Magazine of Concrete Research, v. 74, n. 22 (November 2022).
- (2021): Effect of acid‐activation on CaO existential state and reactive properties of hot‐splashed steel slag in cement‐based materials. In: Structural Concrete, v. 23, n. 6 (December 2021).
- (2022): Nondestructive monitoring and evaluation of permeability of alkali activated slag concrete based on electric resistance. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Effect of Composite Modification of Nickel Slag Powder and Polypropylene Fiber on Mechanical Properties of MKPC Mortar. In: KSCE Journal of Civil Engineering, v. 26, n. 4 (January 2022).
- (2021): Effect of Polyacrylamide on Rheological Properties of Underwater Non-dispersible Paste of Alkali-Activated Slag. In: KSCE Journal of Civil Engineering, v. 26, n. 1 (19 December 2021).
- (2022): Improvement effect of a phase change material on microstructure of cement‐based materials at elevated temperatures. In: Structural Concrete, v. 23, n. 4 (May 2022).
- (2013): Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions. In: Journal of Environmental Engineering (ASCE), v. 139, n. 7 (July 2013).
- (2021): Study on high-efficiency CO2 absorption by fresh cement paste. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Determinant factor for dynamic equilibrium of transformation between vapor in atmosphere and water in concrete. In: Construction and Building Materials, v. 261 (November 2020).
- (2022): Influence of sodium silicate (SS)solution chemistry on reacted product formation and jelly hardening of alkali-activated GGBS mortars. In: Magazine of Concrete Research, v. 74, n. 1 (January 2022).
- (2021): Gradation effect of cleaned quarry waste to improve size distributions of concrete constituents. In: Structural Concrete, v. 22 (January 2021).
- (2018): Experimental research and mechanism analysis on chloride ingress at different concrete zone along altitude in marine environment. Part 1. Moisture distribution. In: Construction and Building Materials, v. 180 (August 2018).
- (2019): Effect of retarders on the early hydration and mechanical properties of reactivated cementitious material. In: Construction and Building Materials, v. 212 (July 2019).
- (2014): The experimental investigation of width of semi-carbonation zone in carbonated concrete. In: Construction and Building Materials, v. 65 (August 2014).
- (2014): Process control of reinforcement corrosion in concrete. Part 2: Time-dependent dominating factors under different environmental conditions. In: Construction and Building Materials, v. 73 (December 2014).
- (2015): Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products. In: Construction and Building Materials, v. 79 (March 2015).
Structurae cooperates with
