Eshmaiel Ganjian 
- (2024): Influence of Calcining Temperature on the Mineralogical and Mechanical Performance of Calcined Impure Kaolinitic Clays in Portland Cement Mortars. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024).
- (2023): Performance of a Single Source of Low-Grade Clay in a Limestone Calcined Clay Cement Mortar. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Electrochemical Performance of Concrete Conductive Anode Paint Used as an Impressed Current Anode Material. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2005): Effect of magnesium and sulfate ions on durability of silica fume blended mixes exposed to the seawater tidal zone. In: Cement and Concrete Research, v. 35, n. 7 (July 2005).
- (2021): Inhibitor efficiency of migratory corrosion inhibitors to reduce corrosion in reinforced concrete exposed to high chloride environment. In: Construction and Building Materials, v. 303 (October 2021).
- (2020): Performance assessment of cathodically protected reinforced concrete structure based on alternative performance criterion: a case study. In: Journal of Building Pathology and Rehabilitation, v. 6, n. 1 (16 November 2020).
- (2021): Mechanical refining combined with chemical treatment for the processing of Bamboo fibres to produce efficient cement composites. In: Construction and Building Materials, v. 269 (February 2021).
- (2021): A methodology for reactive transport modelling and geomechanical investigation of wellbores in CO2 storage sites. In: Construction and Building Materials, v. 268 (January 2021).
- (2021): Parametric study on the integrity of wellbores in CO2 storage sites. In: Construction and Building Materials, v. 268 (January 2021).
- (2020): Potential and current distribution across different layers of reinforcement in reinforced concrete cathodic protection system- A numerical study. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Effect of mix design methods on the mechanical properties of steel fibre-reinforced concrete prepared with recycled aggregates from precast waste. In: Structures, v. 27 (October 2020).
- (2020): Shear characterisation of pultruded superstructural FRP-concrete push-outs. In: Structures, v. 23 (February 2020).
- (2019): The potency of recycled aggregate in new concrete: a review. In: Construction Innovation, v. 19, n. 4 (October 2019).
- (2019): Performance assessment of specialist conductive paint for cathodic protection of steel in reinforced concrete structures. In: Construction and Building Materials, v. 223 (October 2019).
- (2019): Sustainable Construction Materials and Technologies. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 7 (July 2019).
- (2015): Reducing Cement Contents of Paving Blocks by Using Mineral Waste and by-Product Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 1 (January 2015).
- (2011): Special Section on Sustainable Construction Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 6 (June 2011).
- (2011): Effect of Steel Slag and Portland Cement in the Rate of Hydration and Strength of Blast Furnace Slag Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 2 (February 2011).
- (2009): The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag. In: Construction and Building Materials, v. 23, n. 2 (February 2009).
- (2009): Scrap-tyre-rubber replacement for aggregate and filler in concrete. In: Construction and Building Materials, v. 23, n. 5 (May 2009).
- (2011): Comparing flexural behaviour of fibre–cement composites reinforced bagasse: Wheat and eucalyptus. In: Construction and Building Materials, v. 25, n. 9 (September 2011).
- (2013): The effect of limestone powder, silica fume and fibre content on flexural behaviour of cement composite reinforced by waste Kraft pulp. In: Construction and Building Materials, v. 46 (September 2013).
- (2015): The impact of variation in chemical and physical properties of PFA and BPD semi-dry cement paste on strength properties. In: Construction and Building Materials, v. 96 (October 2015).
- (2015): Manufacturing of bacterial nano-cellulose reinforced fiber−cement composites. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Strength, durability and leaching properties of concrete paving blocks incorporating GGBS and SF. In: Construction and Building Materials, v. 113 (June 2016).
- (2019): Predicting the corrosion rate of steel in cathodically protected concrete using potential shift. In: Construction and Building Materials, v. 194 (January 2019).
- (2011): Corrosion mitigation of chloride-contaminated reinforced concrete structures: a state-of-the-art review. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 164, n. 1 (February 2011).
- (2018): A review of oil well cement alteration in CO2-rich environments. In: Construction and Building Materials, v. 186 (October 2018).
- (2004): Preliminary investigations into the use of secondary waste minerals as a novel cementitious landfill liner. In: Construction and Building Materials, v. 18, n. 9 (November 2004).
- (2004): Selection of Cementitious Mixes as a Barrier for Landfill Leachate Containment. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 5 (October 2004).
Structurae cooperates with
