Chuanqing Fu 
- (2024): Investigations on the rheological properties of cement mortar based on fine aggregate characteristic and its extended prediction model. In: Construction and Building Materials, v. 453 (November 2024).
- (2024): Unmasking the degradation of epoxy coating on the surface of steel subjected to stress in simulated concrete pore solution. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Unleashing high-volume waste plastic recycling in sustainable cement mortar with synergistic matrix enabled by in-situ polymerization. In: Construction and Building Materials, v. 447 (October 2024).
- (2024): Optimization of deep excavation construction using an improved multi-objective particle swarm algorithm. In: Automation in Construction, v. 166 (October 2024).
- (2024): Prediction of free chloride concentration in fly ash concrete by machine learning methods SVR, MLP and CNN. In: Magazine of Concrete Research, v. 76, n. 22 (November 2024).
- (2024): Synergistic effects of metakaolin and dolomite on alkali-activated slag exposed to chloride and sulfate solutions. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Passive stress-strain model and ultimate strength prediction for short steel tube confined concrete (STCC) columns allowing for size effect. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Three-dimensional pore structure characterization of cement paste by X-ray computed tomography (XCT) and focused ion beam/scanning electron microscopy (FIB/SEM). In: Construction and Building Materials, v. 383 (June 2023).
- (2024): Investigations on Water Vapor Adsorption–Desorption of Cementitious Materials and Its Induced Permeability under Isothermal Steady-State Flow. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2023): The influence of longitudinal rebar type and stirrup ratio on the bond performance of reinforced concrete with corrosion. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Influences of Corrosion Degree and Uniformity on Bond Strength and Cracking Pattern of Cement Mortar and PVA-ECC. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Investigations on atmospheric carbonation corrosion of concrete structure beam exposed to real marine-environment for 7 years. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Shear behavior of reinforced concrete beams subjected to accelerated non-uniform corrosion. In: Engineering Structures, v. 286 (July 2023).
- (2022): Thermal degradation of potassium-activated ternary slag-fly ash-silica fume binders. In: Construction and Building Materials, v. 320 (February 2022).
- (2021): Study of wiring method on accelerated corrosion of steel bars in concrete. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).
- (2020): Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads. In: International Journal of Civil Engineering, v. 18, n. 8 (April 2020).
- (2020): Mitigating shrinkage of alkali-activated slag by polypropylene glycol with different molecular weights. In: Construction and Building Materials, v. 245 (June 2020).
- (2018): Performance of reinforced concrete beams corroded under sustained service loads: A comparative study of two accelerated corrosion techniques. In: Construction and Building Materials, v. 162 (February 2018).
- (2016): Prediction of chloride binding isotherms for blended cements. In: Computers and Concrete, v. 17, n. 5 (May 2016).
- (2015): A reaction-diffusion modeling of carbonation process in self-compacting concrete. In: Computers and Concrete, v. 15, n. 5 (May 2015).
- (2015): Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition. In: Computers and Concrete, v. 15, n. 2 (February 2015).
- (2012): Model of chloride penetration into cracked concrete subject to drying–wetting cycles. In: Construction and Building Materials, v. 36 (November 2012).
- (2017): Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover. In: Construction and Building Materials, v. 156 (December 2017).
- (2017): Modeling moisture transport at the surface layer of fatigue-damaged concrete. In: Construction and Building Materials, v. 151 (October 2017).
- (2015): Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete. In: Journal of Advanced Concrete Technology, v. 13, n. 1 ( 2015).
- (2018): Non-uniform corrosion of steel in mortar induced by impressed current method: An experimental and numerical investigation. In: Construction and Building Materials, v. 183 (September 2018).
Structurae cooperates with
