Raoul François 
- (2018): Propagation of corrosion-induced cracks of the RC beam exposed to marine environment under sustained load for a period of 26 years. In: Cement and Concrete Research, v. 103 (January 2018).
- (2014): Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams. In: Cement and Concrete Research, v. 56 (February 2014).
- (2011): Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams. In: Engineering Structures, v. 33, n. 12 (December 2011).
- (1996): Leaching of both calcium hydroxide and C-S-H from cement paste: Modeling the mechanical behavior. In: Cement and Concrete Research, v. 26, n. 8 (August 1996).
- (2010): RC beams strengthened with NSM CFRP rods and modeling of peeling-off failure. In: Composite Structures, v. 92, n. 8 (July 2010).
- (2020): Influence of artificial cracks and interfacial defects on the corrosion behavior of steel in concrete during corrosion initiation under a chloride environment. In: Construction and Building Materials, v. 253 (August 2020).
- (2019): Influence of top-casting-induced defects on the corrosion of the compressive reinforcement of naturally corroded beams under sustained loading. In: Construction and Building Materials, v. 229 (December 2019).
- (2001): Modèle de comportement mécanique des poutres en béton armé après fissuration. In: Revue française de Génie civil, v. 5, n. 5 (August 2001).
- (2001): Modélisation du transfert couplé ions chlore-humidité dans les matériaux cimentaires. In: Revue française de Génie civil, v. 5, n. 2-3 (April 2001).
- (2001): Mesure du coefficient de diffusion des chlorures. In: Revue française de Génie civil, v. 5, n. 2-3 (April 2001).
- (1998): Optimisation des structures en béton armé vis-à-vis de la corrosion. In: Revue française de Génie civil, v. 2, n. 8 (January 1998).
- (2016): Modeling Steel Concrete Bond Strength Reduction Due to Corrosion. In: ACI Structural Journal, v. 113, n. 5 (September 2016).
- (2017): Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods. In: Construction and Building Materials, v. 145 (August 2017).
- (2017): Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement. In: Construction and Building Materials, v. 148 (September 2017).
- (2016): Influence of steel–concrete interface defects induced by top-casting on development of chloride-induced corrosion in RC beams under sustained loading. In: Materials and Structures, v. 49, n. 12 (December 2016).
- (2011): Repairing corroded RC beam with near-surface mounted CFRP rods. In: Materials and Structures, v. 44, n. 7 (August 2011).
- (2013): Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams. In: Materials and Structures, v. 46, n. 6 (June 2013).
- (2015): Propagation of corrosion in pre-cracked carbonated reinforced mortar. In: Materials and Structures, v. 48, n. 8 (August 2015).
- (2014): Potential measurement to determine the chloride threshold concentration that initiates corrosion of reinforcing steel bar in slag concretes. In: Materials and Structures, v. 47, n. 9 (September 2014).
- (2011): Influence of steel–concrete interface defects owing to the top-bar effect on the chloride-induced corrosion of reinforcement. In: Magazine of Concrete Research, v. 63, n. 10 (October 2011).
- (2015): Reinforced Concrete Beams Strengthened with NSM CFRP Rods in Shear. In: Advances in Structural Engineering, v. 18, n. 10 (November 2015).
- (2012): Response of corroded prestressed beams with bonded strands. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 165, n. 5 (May 2012).
- (2016): Prediction of the residual load-bearing capacity of naturally corroded beams using the variability of tension behaviour of corroded steel bars. In: Structure and Infrastructure Engineering, v. 12, n. 2 (February 2016).
- (2013): Influence of long-term corrosion in chloride environment on mechanical behaviour of RC beam. In: Engineering Structures, v. 48 (March 2013).
- (2009): Modelling the response of prestressed beams with corroded reinforcement. In: European Journal of Environmental and Civil Engineering, v. 13, n. 6 (July 2009).
- (2013): Modelling of flexural behaviour of RC beams strengthened with NSM CFRP rods including serviceability. In: European Journal of Environmental and Civil Engineering, v. 17, n. 7 (July 2013).
- (2018): Relation between crack opening and extent of the damage induced at the steel/mortar interface. In: Construction and Building Materials, v. 193 (December 2018).
- (1998): Influence of Service Cracking on Reinforcement Steel Corrosion. In: Journal of Materials in Civil Engineering (ASCE), v. 10, n. 1 (February 1998).
- (1997): Prédiction de la pénétration des chlorures dans les structures en béton armé. In: Revue française de Génie civil, v. 1, n. 3 (January 1997).
- (2001): Prédiction du comportement mécanique des ouvrages en béton armé dégradés par corrosion des armatures. In: Travaux, n. 772 (February 2001).
Structurae cooperates with
