Francesco Focacci 
- (2022): Beam tests for the determination of the interfacial properties of FRCM composites. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Tensile Testing of FRCM Coupons for Material Characterization: Discussion of Critical Aspects. In: Journal of Composites for Construction, v. 26, n. 4 (August 2022).
- (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. In: Construction and Building Materials, v. 265 (December 2020).
- (2017): Intrados strengthening of brick masonry arches with different FRCM composites: Experimental and analytical investigations. In: Composite Structures, v. 176 (September 2017).
- (2016): Extrados strengthening of brick masonry arches with PBO–FRCM composites: Experimental and analytical investigations. In: Composite Structures, v. 149 (August 2016).
- (2015): Composite beam generally connected: Analytical model. In: Composite Structures, v. 133 (December 2015).
- (2015): Periodic variation of the transferable load at the FRP-masonry interface. In: Composite Structures, v. 129 (October 2015).
- (2014): Experimental investigation on flexural behavior of timber beams repaired with CFRP plates. In: Composite Structures, v. 108 (February 2014).
- (2013): Strengthening of masonry–unreinforced concrete railway bridges with PBO-FRCM materials. In: Composite Structures, v. 102 (August 2013).
- (2013): Masonry arches strengthened with composite unbonded tendons. In: Composite Structures, v. 98 (April 2013).
- (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. In: Engineering Structures, v. 216 (August 2020).
- (2020): Shear Strength Model for RC Beams with U-Wrapped FRCM Composites. In: Journal of Composites for Construction, v. 24, n. 1 (February 2020).
- (2019): Approximate Evaluation of Maximum Force Transferable at FRP-Masonry Interface. In: Journal of Composites for Construction, v. 23, n. 6 (December 2019).
- (2017): Strengthening Masonry Arches with Lime-Based Mortar Composite. In: Buildings, v. 7, n. 4 (January 2017).
- (2000): Local Bond-Slip Relationship for FRP Reinforcement in Concrete. In: Journal of Composites for Construction, v. 4, n. 1 (February 2000).
- (2011): Flexural Strengthening of RC Beams with Cement-Based Composites. In: Journal of Composites for Construction, v. 15, n. 5 (October 2011).
- (2013): Structural Behavior of Arch Models Strengthened Using Fiber-Reinforced Polymer Strips of Different Lengths. In: Journal of Composites for Construction, v. 17, n. 2 (April 2013).
Structurae cooperates with
