Giuseppe Andrea Ferro 
- (2024): 3D-printed multi-functional foamed concrete building components: material properties, component design, and 3D printing application. In: Developments in the Built Environment, v. 20 (December 2024).
- (2024): An Overview of Methods to Enhance the Environmental Performance of Cement-Based Materials. In: Infrastructures, v. 9, n. 6 (28 May 2024).
- (2024): Research on proportion and performance optimization of pure gangue backfilling slurry based on multi-objective differential evolution algorithm. In: Construction and Building Materials, v. 418 (March 2024).
- (2023): The Effect of Different Biochar on the Mechanical Properties of Cement-Pastes and Mortars. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Structural foamed concrete: preliminary studies for applications in seismic areas. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Collapse of Existing Bridges: From the Lesson of La Reale Viaduct to the Definition of a Partial Safety Coefficient of Variable Traffic Loads. In: Journal of Structural Engineering (ASCE), v. 148, n. 11 (November 2022).
- (2022): Stability, flexural behavior and compressive strength of ultra-lightweight fiber-reinforced foamed concrete with dry density lower than 100 kg/m3. In: Journal of Building Engineering, v. 51 (July 2022).
- (2016): Recycled Mortars with C&D Waste. In: Procedia Structural Integrity, v. 2 ( 2016).
- (2017): Improving the mechanical performance of cement composites by carbon nanotubes addition. In: Procedia Structural Integrity, v. 3 ( 2017).
- (2017): New self-healing techniques for cement-based materials. In: Procedia Structural Integrity, v. 3 ( 2017).
- (2018): Influence of pyrolysis parameters on the efficiency of the biochar as nanoparticles into cement-based composites. In: Procedia Structural Integrity, v. 13 ( 2018).
- (2018): Synthesis, characterization and applications of nano/micro carbonaceous inerts: A review. In: Procedia Structural Integrity, v. 9 ( 2018).
- (2018): Feasibility and effectiveness of exoskeleton structures for seismic protection. In: Procedia Structural Integrity, v. 9 ( 2018).
- (2020): An experimental set-up for cyclic loading of concrete. In: Procedia Structural Integrity, v. 25 ( 2020).
- (2020): Mechanical characterization of different biochar-based cement composites. In: Procedia Structural Integrity, v. 25 ( 2020).
- (2020): Strategies to increase the compressive strength of ultra-lightweight foamed concrete. In: Procedia Structural Integrity, v. 28 ( 2020).
- (2019): Seismic performance of exoskeleton structures. In: Engineering Structures, v. 198 (November 2019).
- (2022): Seismic Vulnerability Analysis of Masonry Churches in Piemonte after 2003 Valle Scrivia Earthquake: Post-event Screening and Situation 17 Years Later. In: International Journal of Architectural Heritage, v. 16, n. 5 (December 2022).
- (2014): Improvements in self-consolidating cementitious composites by using micro carbonized aggregates. In: Frattura ed Integrità Strutturale, v. 8, n. 30 (September 2014).
- (2017): Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).
- (2015): Improvement in electromagnetic interference shielding effectiveness of cement composites using carbonaceous nano/micro inerts. In: Construction and Building Materials, v. 85 (June 2015).
- (2016): Promising low cost carbon-based materials to improve strength and toughness in cement composites. In: Construction and Building Materials, v. 126 (November 2016).
- (2016): Carbonized nano/microparticles for enhanced mechanical properties and electromagnetic interference shielding of cementitious materials. In: Frontiers of Structural and Civil Engineering, v. 10, n. 2 (April 2016).
Structurae cooperates with
