Qian Feng 
- (2024): A data-driven prediction for concrete crack propagation path based on deep learning method. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Synthesis, performance evaluation and retarding mechanism study of ultra-high temperature retarding agent for cementing slurry. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Experimental investigation on influence of embedment length, bar diameter and concrete cover on bond between reinforced bars and steel fiber reinforced concrete (SFRC). In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Failure mechanism analysis and partial-interaction numerical simulation of Grouted Sleeve Connections (GSC) in tensile behavior. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Research on surface modification of polypropylene fiber and its application evaluation in oil well cement. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Passive stress-strain model and ultimate strength prediction for short steel tube confined concrete (STCC) columns allowing for size effect. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Refined Analysis of Spatial Three-Curved Steel Box Girder Bridge and Temperature Stress Prediction Based on WOA-BPNN. In: Buildings, v. 14, n. 2 (1 February 2024).
- (2024): Study on reducing the brittleness of oil well cement by preparing nano-SiO2/epoxy resin composite elastic microspheres based on Pickering emulsion. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Effect of CTBN and Nano-SiO2 modified epoxy resin powder on the mechanical properties of cement-based composites. In: Journal of Building Engineering, v. 83 (April 2024).
- (2023): Optical phase mode analysis method for pipeline bolt looseness identification using distributed optical fiber acoustic sensing. In: Structural Health Monitoring, v. 23, n. 3 (September 2023).
- (2023): Improvement of basalt fiber dispersion and its effect on mechanical characteristics of oil well cement. In: Journal of Building Engineering, v. 76 (October 2023).
- (2022): Analytical solution for quick decision of tied–arch bridge parameters at early-design stage based on Hellinger–Reissner variational method. In: Structures, v. 44 (October 2022).
- (2022): Experimental investigation of stirrup confinement effects on bond-slip responses for corner and middle bars. In: Construction and Building Materials, v. 314 (January 2022).
- (2022): Enhancing the CO2-H2S corrosion resistance of oil well cement with a modified epoxy resin. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Analytical model of grouted sleeve connector and its solution based on the state space method. In: Construction and Building Materials, v. 341 (July 2022).
- : Study on Creep Characteristics and Constitutive Model for Thalam Rock Mass with Fracture in Tunnel. In: Geotechnical and Geological Engineering.
- (2016): Experimental Research on Mechanical Property of Phyllite Tunnel Surrounding Rock Under Different Moisture State. In: Geotechnical and Geological Engineering, v. 35, n. 1 (18 October 2016).
- (2021): Closed-Form Solution of the Ductility of Short FRP-Wrapped Rectangular Concrete Prisms under Eccentric Loads. In: Journal of Composites for Construction, v. 25, n. 5 (October 2021).
- (2021): A passive stress-strain model for concrete prisms reinforced by a combination of confinement reinforcement. In: Engineering Structures, v. 246 (November 2021).
- (2020): Physicochemical Properties and Formation Mechanism of Soot in the MILD–OCC Combustion Flame. In: Journal of Energy Engineering, v. 146, n. 4 (August 2020).
- (2021): Monitoring bond strength of adhesively planted rebars in concrete using electro-mechanical impedance (EMI). In: Journal of Civil Structural Health Monitoring, v. 11, n. 3 (May 2021).
- (2020): Short-term load–deflection behavior of corroded RC beams with confinement effect based on the partial-interaction segmental approach. In: Engineering Structures, v. 220 (October 2020).
- (2020): Axial Load Monitoring for Concrete Columns Using a Wearable Smart Hoop Based on the Piezoelectric Impedance Frequency Shift: A Feasibility Study. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2021): Stirrup effects on the bond properties of corroded reinforced concrete. In: Magazine of Concrete Research, v. 73, n. 22 (November 2021).
- (2020): A New Approach to Retrofitting an Existing Roller Door by Using Viscoelastic Materials for Vibration Reduction with Experimental Verification. In: International Journal of Structural Stability and Dynamics, v. 20, n. 6 (June 2020).
- (2020): Passive seismic protection of building piping systems- A Review. In: International Journal of Structural Stability and Dynamics, v. 20, n. 3 (February 2020).
- (2011): Evaluating the flammability of wood-based panels and gypsum particleboard using a cone calorimeter. In: Construction and Building Materials, v. 25, n. 7 (July 2011).
- (2016): Deterioration of bond–slip due to corrosion of steel reinforcement in reinforced concrete. In: Magazine of Concrete Research, v. 68, n. 15 (August 2016).
- (2018): Effect of steel bar corrosion on flexural behaviour through bond. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 171, n. 5 (May 2018).
- (2015): Crack detection and leakage monitoring on reinforced concrete pipe. In: Smart Materials and Structures, v. 24, n. 11 (November 2015).
Structurae cooperates with
