-
Liapopoulou, M. / Bompa, D. V. / Elghazouli, A. Y. (2024): In and out of plane behaviour of TRM strengthened heritage masonry elements. In: Construction and Building Materials, v. 448 (October 2024).
https://doi.org/10.1016/j.conbuildmat.2024.138152
-
Mujdeci, A. / Guo, Y. T. / Bompa, D. V. / Elghazouli, A. Y. (2024): Performance of circular steel tubes infilled with rubberised concrete under cyclic loads. In: Engineering Structures, v. 302 (March 2024).
https://doi.org/10.1016/j.engstruct.2023.117327
-
Bompa, D. V. / Elghazouli, A. Y. / Bogdan, T. / Eatherthon, M. R. / Leon, R. T. (2023): Inelastic cyclic response of RBS connections with jumbo sections. In: Engineering Structures, v. 281 (April 2023).
https://doi.org/10.1016/j.engstruct.2023.115758
-
Elzeadani, M. / Bompa, D. V. / Elghazouli, A. Y. (2023): Monotonic and cyclic constitutive behaviour of rubberised one-part alkali-activated concrete. In: Construction and Building Materials, v. 368 (March 2023).
https://doi.org/10.1016/j.conbuildmat.2023.130414
-
Elzeadani, M. / Bompa, D. V. / Elghazouli, A. Y. (2022): One part alkali activated materials: A state-of-the-art review. In: Journal of Building Engineering, v. 57 (October 2022).
https://doi.org/10.1016/j.jobe.2022.104871
-
Guo, Y. T. / Bompa, D. V. / Elghazouli, A. Y. (2022): Nonlinear numerical assessments for the in-plane response of historic masonry walls. In: Engineering Structures, v. 268 (October 2022).
https://doi.org/10.1016/j.engstruct.2022.114734
-
Bompa, D. V. / Elghazouli, A. Y. (2021): Mechanical properties of hydraulic lime mortars and fired clay bricks subjected to dry-wet cycles. In: Construction and Building Materials, v. 303 (October 2021).
https://doi.org/10.1016/j.conbuildmat.2021.124458
-
Elghazouli, A. Y. / Bompa, D. V. / Mourad, S. A. / Elyamani, A. (2021): In-plane lateral cyclic behaviour of lime-mortar and clay-brick masonry walls in dry and wet conditions. In: Bulletin of Earthquake Engineering, v. 19, n. 13 (6 September 2021).
https://doi.org/10.1007/s10518-021-01170-5
-
Bravo-Haro, M. A. / Ding, X. / Elghazouli, A. Y. (2021): MEMS-based low-cost and open-source accelerograph for earthquake strong-motion. In: Engineering Structures, v. 230 (March 2021).
https://doi.org/10.1016/j.engstruct.2020.111675
-
Xu, B. / Bompa, D. V. / Elghazouli, A. Y. / Ruiz-Teran, A. M. / Stafford, P. J. (2020): Numerical assessment of reinforced concrete members incorporating recycled rubber materials. In: Engineering Structures, v. 204 (February 2020).
https://doi.org/10.1016/j.engstruct.2019.110017
-
Sulong, N. H. Ramli / Elghazouli, A. Y. / Izzuddin, B. A. / Ajit, N. (2010): Modelling of beam-to-column connections at elevated temperature using the component method. In: Steel and Composite Structures, v. 10, n. 1 (January 2010).
https://doi.org/10.12989/scs.2010.10.1.023
-
Elghazouli, A. Y. / Treadway, J. (2008): Inelastic behaviour of composite members under combined bending and axial loading. In: Journal of Constructional Steel Research, v. 64, n. 9 (September 2008).
https://doi.org/10.1016/j.jcsr.2007.12.016
-
Eder, M. A. / Vollum, R. L. / Elghazouli, A. Y. (2011): Inelastic behaviour of tubular column-to-flat slab connections. In: Journal of Constructional Steel Research, v. 67, n. 7 (July 2011).
https://doi.org/10.1016/j.jcsr.2011.02.009
-
Bravo-Haro, M. A. / Elghazouli, A. Y. (2018): Permanent seismic drifts in steel moment frames. In: Journal of Constructional Steel Research, v. 148 (September 2018).
https://doi.org/10.1016/j.jcsr.2018.06.006
-
Elghazouli, A. Y. / Rotter, J. M. (1996): Long-term performance and assessment of circular reinforced concrete silos. In: Construction and Building Materials, v. 10, n. 2 (March 1996).
https://doi.org/10.1016/0950-0618(95)00091-7
-
Karagiannis, V. / Málaga-Chuquitaype, C. / Elghazouli, A. Y. (2016): Modified foundation modelling of dowel embedment in glulam connections. In: Construction and Building Materials, v. 102 (January 2016).
https://doi.org/10.1016/j.conbuildmat.2015.09.021
-
Elnashai, A. S. / Elghazouli, A. Y. (1993): Performance of composite steel/concrete members under earthquake loading. Part I: Analytical model. In: Earthquake Engineering and Structural Dynamics, v. 22, n. 4 (April 1993).
https://doi.org/10.1002/eqe.4290220404
-
Elghazouli, A. Y. / Elnashai, A. S. (1993): Performance of composite steel/concrete members under earthquake loading. Part II: Parametric studies and design considerations. In: Earthquake Engineering and Structural Dynamics, v. 22, n. 4 (April 1993).
https://doi.org/10.1002/eqe.4290220405
-
Kumar, M. / Castro, J. M. / Stafford, P. J. / Elghazouli, A. Y. (2011): Influence of the mean period of ground motion on the inelastic dynamic response of single and multi degree of freedom systems. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 3 (March 2011).
https://doi.org/10.1002/eqe.1013
-
Málaga-Chuquitaype, C. / Elghazouli, A. Y. (2012): Inelastic displacement demands in steel structures and their relationship with earthquake frequency content parameters. In: Earthquake Engineering and Structural Dynamics, v. 41, n. 5 (25 April 2012).
https://doi.org/10.1002/eqe.1156
-
Eder, M. A. / Vollum, R. L. / Elghazouli, A. Y. (2012): Performance of ductile RC flat slab to steel column connections under cyclic loading. In: Engineering Structures, v. 36 (March 2012).
https://doi.org/10.1016/j.engstruct.2011.12.002
-
Kumar, M. / Stafford, P. J. / Elghazouli, A. Y. (2013): Influence of ground motion characteristics on drift demands in steel moment frames designed to Eurocode 8. In: Engineering Structures, v. 52 (July 2013).
https://doi.org/10.1016/j.engstruct.2013.03.010
-
Castro, J. M. / Elghazouli, A. Y. / Izzuddin, B. A. (2005): Modelling of the panel zone in steel and composite moment frames. In: Engineering Structures, v. 27, n. 1 (January 2005).
https://doi.org/10.1016/j.engstruct.2004.09.008
-
Eder, M. A. / Vollum, R. L. / Elghazouli, A. Y. / Abdel-Fattah, T. (2010): Modelling and experimental assessment of punching shear in flat slabs with shearheads. In: Engineering Structures, v. 32, n. 12 (December 2010).
https://doi.org/10.1016/j.engstruct.2010.09.004
-
Spagnoli, A. / Elghazouli, A. Y. / Chryssanthopoulos, M. K. (2001): Numerical simulation of glass-reinforced plastic cylinders under axial compression. In: Marine Structures, v. 14, n. 3 (May 2001).
https://doi.org/10.1016/s0951-8339(00)00008-3
-
Bompa, D. V. / Elghazouli, A. Y. (2017): Numerical modelling and parametric assessment of hybrid flat slabs with steel shear heads. In: Engineering Structures, v. 142 (July 2017).
https://doi.org/10.1016/j.engstruct.2017.03.070
-
Fang, C. / Izzuddin, B. A. / Elghazouli, A. Y. / Nethercot, D. A. (2013): Modeling of semi-rigid beam-to-column steel joints under extreme loading. In: Frontiers of Structural and Civil Engineering, v. 7, n. 3 (August 2013).
https://doi.org/10.1007/s11709-013-0215-9
-
Stylianidis, P. M. / Nethercot, D. A. / Izzuddin, B. A. / Elghazouli, A. Y. (2015): Modelling of beam response for progressive collapse analysis. In: Structures, v. 3 (August 2015).
https://doi.org/10.1016/j.istruc.2015.04.001
-
Elghazouli, A. Y. / Bompa, D. V. / Xu, B. / Ruiz‐Teran, A. M. / Stafford, P. J. (2018): Performance of rubberised reinforced concrete members under cyclic loading. In: Engineering Structures, v. 166 (July 2018).
https://doi.org/10.1016/j.engstruct.2018.03.090
-
Bompa, D. V. / Elghazouli, A. Y. (2019): Inelastic cyclic behaviour of RC members incorporating threaded reinforcement couplers. In: Engineering Structures, v. 180 (February 2019).
https://doi.org/10.1016/j.engstruct.2018.11.053