Zhenhua Duan 
- (2024): An intelligent mix design system for sustainable concrete containing multi-source recycled aggregate. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): A new method for determination of segregation stability of pumped ready‐mixed concrete: Rapid wet‐sieved test. In: Structural Concrete, v. 25, n. 5 (October 2024).
- (2024): Interlayer bonding strength and pore characteristics of 3D printed engineered cementitious composites (ECC). In: Journal of Building Engineering, v. 84 (May 2024).
- (2024): Developing low-carbon high-strength core-shell aggregates using solid waste by cold-bonding techniques. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Early-stage water-absorbing behavior and mechanism of recycled coarse aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Development and characteristics of novel high-strength lightweight core-shell aggregate. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Mechanical properties and pore structure of 3D printed mortar with recycled powder. In: Construction and Building Materials, v. 394 (August 2023).
- (2022): Effect of pore structure and morphological characteristics of recycled fine aggregates from clay bricks on mechanical properties of concrete. In: Construction and Building Materials, v. 358 (December 2022).
- (2022): Enhancing the elastic modulus of concrete prepared with recycled coarse aggregates of different quality by chemical modifications. In: Construction and Building Materials, v. 360 (December 2022).
- (2023): Influence of fiber properties on abrasion resistance of recycled aggregate concrete: Length, volume fraction, and types of fibers. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Effect of metakaolin on the fresh and hardened properties of 3D printed cementitious composite. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Fundamental behavior of recycled aggregate concrete - Overview II: Durability and enhancement. In: Magazine of Concrete Research, v. 74, n. 19 (October 2022).
- (2022): Developing recycled foamed concrete for engineered material arresting system. In: Journal of Building Engineering, v. 53 (August 2022).
- (2021): Fresh properties of 3D printed mortar with recycled powder. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Combined use of recycled concrete aggregate and glass cullet in mortar: Strength, alkali expansion and chemical compositions. In: Journal of Building Engineering, v. 55 (September 2022).
- (2022): Effects of printing paths and recycled fines on drying shrinkage of 3D printed mortar. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Geopolymers made of recycled brick and concrete powder – A critical review. In: Construction and Building Materials, v. 330 (May 2022).
- (2022): Mechanical properties and uniaxial compressive stress-strain behavior of fully recycled aggregate concrete. In: Construction and Building Materials, v. 323 (March 2022).
- (2021): On rheology of mortar with recycled fine aggregate for 3D printing. In: Construction and Building Materials, v. 311 (December 2021).
- (2022): Mechanical behavior of seawater sea-sand recycled concrete columns confined by engineered cementitious composite under eccentric compression. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Effect of moisture condition and brick content in recycled coarse aggregate on rheological properties of fresh concrete. In: Journal of Building Engineering, v. 35 (March 2021).
- (2020): 3D recycled mortar printing: System development, process design, material properties and on-site printing. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Improvement on the properties of waste glass mortar with nanomaterials. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Combined use of recycled powder and recycled coarse aggregate derived from construction and demolition waste in self-compacting concrete. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Mechanical behavior of 3D printed mortar with recycled sand at early ages. In: Construction and Building Materials, v. 248 (July 2020).
- (2021): Optimizing mix proportion of recycled aggregate concrete by readjusting the aggregate gradation. In: Structural Concrete, v. 22 (January 2021).
- (2020): Chloride permeability of recycled aggregate concrete under the coupling effect of freezing-thawing, elevated temperature or mechanical damage. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Effects of an Applied Load on the Chloride Penetration of Concrete with Recycled Aggregates and Recycled Powder. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Chloride permeability and the caused steel corrosion in the concrete with carbonated recycled aggregate. In: Construction and Building Materials, v. 218 (September 2019).
- (2019): Effects of High Temperature and Cooling Pattern on the Chloride Permeability of Concrete. In: Advances in Civil Engineering, v. 2019 ( 2019).
Structurae cooperates with
