0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Robert G. Driver ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Twizell, Sheldon C. / Ji, Xiao Lin “Dimple” / Imanpour, Ali / Driver, Robert G. (2023): Lateral–Torsional and Distortional Buckling of I-Shaped Welded Steel Girders. In: Journal of Structural Engineering (ASCE), v. 149, n. 9 (September 2023).

    https://doi.org/10.1061/jsendh.steng-11961

  2. Unsworth, Daniel / Driver, Robert G. / Li, Leijun (2020): Measurement and prediction of residual stresses in welded girders. In: Journal of Constructional Steel Research, v. 169 (June 2020).

    https://doi.org/10.1016/j.jcsr.2020.106007

  3. Begum, Mahbuba / Driver, Robert G. / Elwi, Alaa E. (2015): Parametric study on eccentrically-loaded partially encased composite columns under major axis bending. In: Steel and Composite Structures, v. 19, n. 5 (November 2015).

    https://doi.org/10.12989/scs.2015.19.5.1299

  4. Driver, Robert G. / Moghimi, Hassan (2011): Modular Construction of Steel Plate Shear Walls for Low and Moderate Seismic Regions. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.

    https://doi.org/10.1061/41171(401)67

  5. Driver, Robert G. / Grondin, Gilbert Y. / Kulak, Geoffrey L. (2006): Unified block shear equation for achieving consistent reliability. In: Journal of Constructional Steel Research, v. 62, n. 3 (March 2006).

    https://doi.org/10.1016/j.jcsr.2005.06.002

  6. Bhowmick, Anjan K. / Driver, Robert G. / Grondin, Gilbert Y. (2009): Seismic analysis of steel plate shear walls considering strain rate and –delta effects. In: Journal of Constructional Steel Research, v. 65, n. 5 (May 2009).

    https://doi.org/10.1016/j.jcsr.2008.08.003

  7. Moghimi, Hassan / Driver, Robert G. (2015): Performance assessment of steel plate shear walls under accidental blast loads. In: Journal of Constructional Steel Research, v. 106 (March 2015).

    https://doi.org/10.1016/j.jcsr.2014.11.010

  8. Bhowmick, Anjan K. / Grondin, Gilbert Y. / Driver, Robert G. (2014): Nonlinear seismic analysis of perforated steel plate shear walls. In: Journal of Constructional Steel Research, v. 94 (March 2014).

    https://doi.org/10.1016/j.jcsr.2013.11.006

  9. Oosterhof, Steven A. / Driver, Robert G. (2016): Shear connection modelling for column removal analysis. In: Journal of Constructional Steel Research, v. 117 (February 2016).

    https://doi.org/10.1016/j.jcsr.2015.10.015

  10. Daneshvar, Hossein / Driver, Robert G. (2019): One-Sided Steel Shear Connections in Progressive Collapse Scenario. In: Journal of Architectural Engineering (ASCE), v. 25, n. 2 (June 2019).

    https://doi.org/10.1061/(asce)ae.1943-5568.0000354

  11. Abbas, Hassan H. / Sause, Richard / Driver, Robert G. (2007): Simplified analysis of flange transverse bending of corrugated web I-girders under in-plane moment and shear. In: Engineering Structures, v. 29, n. 11 (November 2007).

    https://doi.org/10.1016/j.engstruct.2007.01.006

  12. Moghimi, Hassan / Driver, Robert G. (2014): Performance-Based Capacity Design of Steel Plate Shear Walls. I: Development Principles. In: Journal of Structural Engineering (ASCE), v. 140, n. 12 (December 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0001023

  13. Moghimi, Hassan / Driver, Robert G. (2014): Performance-Based Capacity Design of Steel Plate Shear Walls. II: Design Provisions. In: Journal of Structural Engineering (ASCE), v. 140, n. 12 (December 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0001022

  14. Bhowmick, Anjan K. / Grondin, Gilbert Y. / Driver, Robert G. (2010): Performance of Type D and Type LD steel plate walls. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 37, n. 1 (January 2010).

    https://doi.org/10.1139/l09-126

  15. Huns, Bino B. S. / Grondin, Gilbert Y. / Driver, Robert G. (2006): Tension and shear block failure of bolted gusset plates. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 4 (April 2006).

    https://doi.org/10.1139/l05-104

  16. Franchuk, Cameron R. / Driver, Robert G. / Grondin, Gilbert Y. (2004): Reliability Analysis of Block Shear Capacity of Coped Steel Beams. In: Journal of Structural Engineering (ASCE), v. 130, n. 12 (December 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:12(1904)

  17. Driver, Robert G. / Abbas, Hassan H. / Sause, Richard (2006): Shear Behavior of Corrugated Web Bridge Girders. In: Journal of Structural Engineering (ASCE), v. 132, n. 2 (February 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:2(195)

  18. Daneshvar, Hossein / Driver, Robert G. (2018): Modelling benchmarks for steel shear connections in column removal scenario. In: Journal of Building Engineering, v. 16 (March 2018).

    https://doi.org/10.1016/j.jobe.2017.12.013

  19. Daneshvar, Hossein / Driver, Robert G. (2018): Performance evaluation of WT connections in progressive collapse. In: Engineering Structures, v. 167 (July 2018).

    https://doi.org/10.1016/j.engstruct.2018.04.043

  20. Wong, Edgar / Driver, Robert G. / Heal, Tyler W. (2015): Simplified approach to estimating the elastic lateral–torsional buckling capacity of steel beams with top-flange loading. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 42, n. 2 (February 2015).

    https://doi.org/10.1139/cjce-2014-0265

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine