Marco Di Ludovico 
- : An approach to seismic damage detection and evaluation in RC bridge piers through vibration data. In: Structure and Infrastructure Engineering.
- (2023): Analysis of the seismic vulnerability and innovative retrofit solutions of cavity brickwork walls. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Damage Estimation of Full-Scale Infilled RC Frames under Pseudo-Dynamic Excitation by Means of Output-Only Modal Identification. In: Buildings, v. 13, n. 4 (24 March 2023).
- (2023): Fragility functions for fiber-reinforced polymers strengthened reinforced concrete beam-column joints. In: Engineering Structures, v. 279 (March 2023).
- (2023): Correlation of local and global structural damage state for SHM. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Effectiveness of traditional strengthening measures on historic masonry buildings: the seismic performance of Palazzo Comunale in Camerino after 2016-2017 seismic sequence. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): FRP grouted anchors contribution to the masonry walls OOP response through the kinematic approach of limit analysis. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Fibre reinforced mortars for the out-of-plane strengthening of masonry walls. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Fragility curves of Italian school buildings: derivation from L’Aquila 2009 earthquake damage via observational and heuristic approaches. In: Bulletin of Earthquake Engineering, v. 21, n. 1 (October 2022).
- (2022): Guide for Strengthening of Concrete Structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 978-2-88394-157-1.
- (2022): Census-based typological usability fragility curves for Italian unreinforced masonry buildings. In: Bulletin of Earthquake Engineering, v. 20, n. 8 (March 2022).
- (2022): Experimental and analytical investigation on the lateral response of ball rubber bearing isolators. In: Soil Dynamics and Earthquake Engineering, v. 155 (April 2022).
- (2023): Creep effects on elastomeric and ball rubber bearings under sustained lateral loads. In: Structure and Infrastructure Engineering, v. 19, n. 10 (February 2023).
- (2021): Crack width-based fragility curves for repairability of substandard beam-column joints. In: Bulletin of Earthquake Engineering, v. 19, n. 14 (September 2021).
- (2021): Experimental analysis of lime putty and pozzolan-based mortar for interventions in archaeological sites. In: Materials and Structures, v. 54, n. 4 (2 July 2021).
- (2021): Conceptual design of integrated seismic and energy retrofit interventions. In: Journal of Building Engineering, v. 38 (June 2021).
- (2020): Diagonal compression testing of masonry panels with irregular texture strengthened with inorganic composites. In: Materials and Structures, v. 53, n. 4 (26 June 2020).
- (2019): Experimental In-Plane Shear Capacity of Clay Brick Masonry Panels Strengthened with FRCM and FRM Composites. In: Journal of Composites for Construction, v. 23, n. 5 (October 2019).
- (2019): Empirical fragility curves for masonry buildings after the 2009 L'Aquila, Italy, earthquake. In: Bulletin of Earthquake Engineering, v. 17, n. 11 (July 2019).
- (2019): Experimental response and fiber-reinforced cement composites strengthening of real reinforced concrete columns with poor-quality concrete. In: Structural Concrete, v. 20, n. 3 (June 2019).
- (2010): FRP Confinement of Tuff and Clay Brick Columns: Experimental Study and Assessment of Analytical Models. In: Journal of Composites for Construction, v. 14, n. 5 (October 2010).
- (2014): Experimental Investigation of Exterior RC Beam-Column Joints Retrofitted with FRP Systems. In: Journal of Composites for Construction, v. 18, n. 4 (August 2014).
- (2015): Assessing reparability: simple tools for estimation of costs and performance loss of earthquake damaged reinforced concrete buildings. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 10 (August 2015).
- (2013): Damage-dependent vulnerability curves for existing buildings. In: Earthquake Engineering and Structural Dynamics, v. 42, n. 6 (May 2013).
- (2015): Analytical model and design approach for FRP strengthening of non-conforming RC corner beam–column joints. In: Engineering Structures, v. 87 (March 2015).
- (2016): Empirical fragility curves from damage data on RC buildings after the 2009 L'Aquila earthquake. In: Bulletin of Earthquake Engineering, v. 15, n. 4 (November 2016).
- (2016): Deformation capacity of non-conforming r.c. columns under compressive axial load and biaxial bending. In: Engineering Structures, v. 124 (October 2016).
- (2017): Comparison of available shear strength models for non-conforming reinforced concrete columns. In: Engineering Structures, v. 148 (October 2017).
- (2017): Experimental Behavior of Nonconforming RC Columns with Deformed Bars under Constant Axial Load and Fixed Biaxial Bending. In: Journal of Structural Engineering (ASCE), v. 143, n. 11 (November 2017).
- (2010): Bond Behavior at the Interface in Concrete Elements Strengthened with NSM Bars and Strips. Presented at: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae cooperates with
