Yang Deng 
- (2024): Combination of LiDAR detection and green integral method for calculating irregular cross-section geometric properties of deteriorated components in timber historic buildings. In: Digital Applications in Archaeology and Cultural Heritage, v. 35 (December 2024).
- (2024): Automatic Modal Frequency Identification of Bridge Cables under Influence of Abnormal Monitoring Data. In: Journal of Performance of Constructed Facilities (ASCE), v. 38, n. 6 (December 2024).
- (2024): An accurate and low-cost vehicle-induced deflection prediction framework for long-span bridges using deep learning and monitoring data. In: Engineering Structures, v. 310 (July 2024).
- (2024): Effect of recycled concrete fine powder after calcination on the properties of autoclaved aerated concrete. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Experimental study on seismic performance of crumb rubber aeolian sand concrete columns. In: Structures, v. 61 (March 2024).
- (2024): Abnormal data detection for structural health monitoring: State-of-the-art review. In: Developments in the Built Environment, v. 17 (March 2024).
- (2023): Direct use of original granular steel slag to prepare multi-phased clinker: Sintering mechanism and properties. In: Construction and Building Materials, v. 390 (August 2023).
- (2023): Investigation of Bond Behavior between Steel Bar and Concrete under Coupled Effect of Fatigue Loading and Corrosion. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (October 2023).
- (2023): Fatigue Strengthening for Rib-to-Deck Joint by Bonding Reinforcing Plates on the Deck Surface. In: Journal of Bridge Engineering (ASCE), v. 28, n. 7 (July 2023).
- (2023): Effect of recycled fine powder on autoclaved aerated concrete: Gas-foaming, physic-mechanical property and hydration products. In: Journal of Building Engineering, v. 67 (May 2023).
- (2024): Abnormal Data Recovery of Structural Health Monitoring for Ancient City Wall Using Deep Learning Neural Network. In: International Journal of Architectural Heritage, v. 18, n. 3 (December 2024).
- (2023): Data quality evaluation for bridge structural health monitoring based on deep learning and frequency-domain information. In: Structural Health Monitoring, v. 22, n. 5 (February 2023).
- (2022): Correlation model of deflection, vehicle load, and temperature for in‐service bridge using deep learning and structural health monitoring. In: Structural Control and Health Monitoring, v. 29, n. 12 (5 October 2022).
- (2022): Advanced Reduction Processes for Degradation of Refractory Organics in Landfill Leachate. In: Journal of Environmental Engineering (ASCE), v. 148, n. 9 (September 2022).
- (2016): Fatigue Reliability Assessment of Orthotropic Bridge Decks under Stochastic Truck Loading. In: Shock and Vibration, v. 2016 ( 2016).
- (2023): Comparative Studies of Computational Fluid Dynamic Geometric Models at Multiple Levels of Details in Evaluating Wind Action on Asian Ancient Wooden Tower. In: International Journal of Architectural Heritage, v. 17, n. 6 (January 2023).
- (2019): Aluminum-Impregnated Biochar for Adsorption of Arsenic(V) in Urban Stormwater Runoff. In: Journal of Environmental Engineering (ASCE), v. 145, n. 4 (April 2019).
- (2018): Characterization of Dissolved Organic Matter in Mature Leachate during Ammonia Stripping and Two-Stage Aged-Refuse Bioreactor Treatment. In: Journal of Environmental Engineering (ASCE), v. 144, n. 1 (January 2018).
- (2018): Fatigue performance investigation for hangers of suspension bridges based on site-specific vehicle loads. In: Structural Health Monitoring, v. 18, n. 3 (March 2018).
- (2020): Equivalent uniform live loads under transit vehicles for floor slab of long-span urban transportation hubs. In: Journal of Asian Architecture and Building Engineering, v. 20, n. 3 (October 2020).
- (2020): Fatigue Crack Assessment for Orthotropic Steel Deck Based on Compound Poisson Process. In: Journal of Bridge Engineering (ASCE), v. 25, n. 8 (August 2020).
- (2019): Fatigue Reliability Evaluation of Orthotropic Steel Bridge Decks Based on Site-Specific Weigh-in-Motion Measurements. In: International Journal of Steel Structures, v. 19, n. 1 ( 2019).
- (2019): Fatigue Performance of Orthotropic Steel Decks with FRP Angles: Field Measurement and Numerical Analysis. In: Journal of Performance of Constructed Facilities (ASCE), v. 33, n. 4 (August 2019).
- (2015): Investigation of fatigue performance of welded details in long-span steel bridges using long-term monitoring strain data. In: Structural Control and Health Monitoring, v. 22, n. 11 (November 2015).
- (2015): Deflection monitoring and assessment for a suspension bridge using a connected pipe system: a case study in China. In: Structural Control and Health Monitoring, v. 22, n. 12 (December 2015).
- (2016): Flexural experiment and stiffness investigation of reinforced concrete beam under chloride penetration and sustained loading. In: Construction and Building Materials, v. 117 (August 2016).
- (2008): Experimental and Analytical Studies on Static and Dynamic Characteristics of Steel Box Girder for Runyang Cable-Stayed Bridge. In: Advances in Structural Engineering, v. 11, n. 4 (August 2008).
- (2018): Fatigue Reliability Assessment for Orthotropic Steel Deck Details Using Copulas: Application to Nan-Xi Yangtze River Bridge. In: Journal of Bridge Engineering (ASCE), v. 23, n. 1 (January 2018).
- (2017): Effect of live load on simply supported bridges under a random traffic flow based on weigh-in-motion data. In: Advances in Structural Engineering, v. 20, n. 5 (April 2017).
- (2018): Investigation of temperature actions on flat steel box girders of long-span bridges with temperature monitoring data. In: Advances in Structural Engineering, v. 21, n. 14 (April 2018).
Structurae cooperates with
