-
Scozzese, Fabrizio / Ceccolini, Nicola / Zona, Alessandro / Dall’Asta, Andrea / Degée, Hervé (2024): Ductile design of single-pier steel and concrete hybrid coupled walls with hinged base and corner components. In: Engineering Structures, v. 315 (September 2024).
https://doi.org/10.1016/j.engstruct.2024.118429
-
Dragan, Dan / Das, Rajarshi / Bogdan, Teodora / Degée, Hervé (2024): Characterization of different longitudinal shear transfer mechanisms for profiles embedded in concrete walls. In: Structures, v. 68 (October 2024).
https://doi.org/10.1016/j.istruc.2024.107044
-
Das, Rajarshi / Kanyilmaz, Alper / Zoromba, Ezzeldin / Menghini, Alessandro / Degée, Hervé (2024): A cradle-to-site life cycle analysis of laser-cut passing-through tubular joints under different seismic conditions. In: Structures, v. 63 (May 2024).
https://doi.org/10.1016/j.istruc.2024.106313
-
Vulcu, Cristian / Hoffmeister, Benno / Bimbli, Dorina / Das, Rajarshi / Degée, Hervé (2023): Hybrid Coupled Walls with Replaceable Shear Links: Technical Solution and Seismic Performance of a 3D Multi‐Story Building. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2460
-
Scozzese, Fabrizio / Ceccolini, Nicola / Zona, Alessandro / Dall'Asta, Andrea / Leoni, Graziano / Degée, Hervé (2023): Design and analysis of steel‐concrete hybrid coupled walls with hinged base and corner components. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2549
-
Dragan, Dan / Das, Rajarshi / Degée, Hervé (2023): Characterizing transition zone between steel‐concrete composite and reinforced concrete members. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2618
-
Dunai, László / Kövesdi, Balázs / Gardner, Leroy / Al‐Emrani, Mohammad / Casafont, Miquel / Degée, Hervé / Jandera, Michal / Kuhlmann, Ulrike / Taras, Andreas / Walport, Fiona (2023): Design assisted by finite element analysis – Introduction to prEN 1993‐1‐14 and Technical Report. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2574
-
Driesen, Cedric / Degée, Hervé / Vandoren, Bram (2021): Efficient modeling of masonry failure using a multiscale domain activation approach. In: Computers & Structures, v. 251 (July 2021).
https://doi.org/10.1016/j.compstruc.2021.106543
-
Rajapakse, Chathura / Degée, Hervé / Mihaylov, Boyan (2021): Assessment of Failure along Re-Entrant Corner Cracks in Existing RC Dapped-End Connections. In: Structural Engineering International, v. 31, n. 2 (April 2021).
https://doi.org/10.1080/10168664.2021.1878975
-
Degée, Hervé / Hoffmeister, Benno / Duchêne, Yves (2020): Dissipative Rahmentragwerke mit schlanken Querschnitten in Regionen mit moderater Seismizität. In: Stahlbau, v. 89, n. 1 (January 2020).
https://doi.org/10.1002/stab.201900112
-
Denoël, Vincent / Degée, Hervé (2006): Influence of the non-linearity of the aerodynamic coefficients on the skewness of the buffeting drag force. In: Wind & Structures, v. 9, n. 6 (December 2006).
https://doi.org/10.12989/was.2006.9.6.457
-
Das, Rajarshi / Castiglioni, Carlo A. / Couchaux, Maël / Hoffmeister, Benno / Degée, Hervé (2020): Design and analysis of laser-cut based moment resisting passing-through I-beam-to-CHS column joints. In: Journal of Constructional Steel Research, v. 169 (June 2020).
https://doi.org/10.1016/j.jcsr.2020.106015
-
Das, Rajarshi / Kanyilmaz, Alper / Couchaux, Maël / Hoffmeister, Benno / Degée, Hervé (2020): Characterization of moment resisting I-beam to circular hollow section column connections resorting to passing-through plates. In: Engineering Structures, v. 210 (May 2020).
https://doi.org/10.1016/j.engstruct.2020.110356
-
Rossi, Barbara / Degée, Hervé / Pascon, Frédéric (2009): Enhanced mechanical properties after cold process of fabrication of non-linear metallic profiles. In: Thin-Walled Structures, v. 47, n. 12 (December 2009).
https://doi.org/10.1016/j.tws.2009.05.004
-
Degée, Hervé / Rossi, Barbara / Jehin, Denis (2011): Geometrically Nonlinear Analysis of Steel Storage Racks Submitted To Earthquake Loading. In: International Journal of Structural Stability and Dynamics, v. 11, n. 5 (October 2011).
https://doi.org/10.1142/s0219455411004415
-
Zona, Alessandro / Degée, Hervé / Leoni, Graziano / Dall'Asta, Andrea (2016): Ductile design of innovative steel and concrete hybrid coupled walls. In: Journal of Constructional Steel Research, v. 117 (February 2016).
https://doi.org/10.1016/j.jcsr.2015.10.017
-
Zona, Alessandro / Leoni, Graziano / Degée, Hervé / Dall'Asta, Andrea (2014): Design of innovative seismic-resistant steel-concrete hybrid coupled shear walls. Presented at: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
https://doi.org/10.2749/222137814814069093
-
Mordant, Christophe / Degée, Hervé / Denoël, Vincent (2017): Identification of equivalent mechanical properties for unreinforced masonry walls. In: International Journal of Masonry Research and Innovation, v. 2, n. 4 ( 2017).
https://doi.org/10.1504/ijmri.2017.087432
-
Somja, Hugues / Nofal, Srour / Hjiaj, Mohammed / Degée, Hervé (2013): Effect of the steel material variability on the seismic capacity design of steel-concrete composite structures: a parametric study. In: Bulletin of Earthquake Engineering, v. 11, n. 4 (February 2013).
https://doi.org/10.1007/s10518-012-9420-5
-
Plumier, André / Dragan, Dan / Quang Huy, Nguyen / Degée, Hervé (2017): An Analytical Design Method for Steel-Concrete Hybrid Walls. In: Structures, v. 9 (February 2017).
https://doi.org/10.1016/j.istruc.2016.12.007
-
Kanyilmaz, Alper / Degée, Hervé / Castiglioni, Carlo Andrea (2018): An adjusted design approach for concentrically braced frames in low-to-moderate seismicity areas. In: Bulletin of Earthquake Engineering, v. 16, n. 9 (February 2018).
https://doi.org/10.1007/s10518-018-0402-0
-
Vamvatsikos, Dimitrios / Castiglioni, Carlo / Bakalis, Konstantinos / Calado, Luís / D'Aniello, Mario / Degée, Hervé / Hoffmeister, Benno / Pinkawa, Marius / Proenca, Jorge Miguel / Kanyilmaz, Alper / Morelli, Francesco / Stratan, Aurel / Vayas, Ioannis (2017): I.11.47: A risk-consistent approach to determine behavior factors for innovative steel lateral load resisting systems. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.398
-
Martin, Pierre-Olivier / Rodier, Anthony / Couchaux, Maël / Kanyilmaz, Alper / Degée, Hervé (2017): 11.57: Assessment of the ductile behaviour of CBF structures considering energy dissipation in bolted joints. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.384
-
Henriques, José / Morelli, Francesco / Salvatore, Walter / Degée, Hervé (2017): 11.63: Seismic protection of gas tanks. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.388
-
Das, Rajarshi / Zona, Alessandro / Vandoren, Bram / Degée, Hervé (2017): 11.33: Performance evaluation of an innovative HCW system with Shear Dissipative Links. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.362
-
Dragan, Dan / Plumier, André / Degée, Hervé (2017): 08.59: Shear behavior of concrete walls reinforced by multiple steel profiles Calibration of numerical model. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.279
-
Plumier, André / Degée, Hervé (2017): 08.11: The SMARTCOCO project: A research push for hybrid structures. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.236
-
Zhao, Jun / Cai, Gaochuang / Si Larbi, Amir / Zhang, Yang / Dun, Huahua / Degée, Hervé / Vandoren, Bram (2018): Hysteretic behaviour of steel fibre RC coupled shear walls under cyclic loads: Experimental study and modelling. In: Engineering Structures, v. 156 (February 2018).
https://doi.org/10.1016/j.engstruct.2017.11.006
-
Degée, Hervé / Maquoi, René / Detzel, Annette / Kuhlmann, Ulrike (2007): Compression members with slender Class 4 box sections susceptible to combined local and global buckling for use in steel arch bridges. Presented at: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
https://doi.org/10.2749/222137807796120003
-
Oppe, Matthias / Feldmann, Markus / Naumes, Johannes / Degée, Hervé / Maquoi, René / Boissonnade, Nicolas (2007): Experimental and numerical investigations for I-girders in bending and shear stiffened by closed trapezoidal stiffeners for use in steel bridges. Presented at: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
https://doi.org/10.2749/weimar.2007.0102