Geert De Schutter 
- (2024): In situ determination of cement paste porosity in parallel with corrosion study of aluminium alloy 1100 in Portland cement pastes. In: Materials and Structures, v. 57, n. 9 (10 October 2024).
- (2024): Mechanism of concrete damage under the coupled action of freeze-thaw cycle and low-stress impact fatigue load：From pore structure to energy dissipation. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Interfacial bonding of 3D printable concrete with chemically reactive coating for automatic repair. In: Developments in the Built Environment, v. 17 (March 2024).
- (2023): Mechanical properties prediction of blast furnace slag and fly ash-based alkali-activated concrete by machine learning methods. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Influence of rheology on mixing homogeneity and mechanical behavior of twin-pipe 3D printable concrete. In: Construction and Building Materials, v. 408 (December 2023).
- (2020): Monitoring early-age acoustic emission of cement paste and fly ash paste. In: Cement and Concrete Research, v. 129 (March 2020).
- (2013): Micro- and meso-scale pore structure in mortar in relation to aggregate content. In: Cement and Concrete Research, v. 52 (October 2013).
- (2016): Investigation of the changes in microstructure and transport properties of leached cement pastes accounting for mix composition. In: Cement and Concrete Research, v. 79 (January 2016).
- (2016): Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. In: Cement and Concrete Research, v. 79 (January 2016).
- (2021): The improvement of freezing–thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): Insights into the viscoelastic properties of cement paste based on SAOS technique. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Influence of aluminum sulfate on mobility and adhesion of hydroxyethyl methyl cellulose in cement-based materials for tunnel linings. In: Cement and Concrete Composites, v. 131 (August 2022).
- (2022): Magneto-responsive structural build-up of highly flowable cementitious paste in the presence of PCE superplasticizer. In: Construction and Building Materials, v. 327 (April 2022).
- (2020): Influence of water to binder ratio on the rheology and structural Build-up of Alkali-Activated Slag/Fly ash mixtures. In: Construction and Building Materials, v. 264 (December 2020).
- (2018): Mix design factors of self-consolidating cement paste affecting the magnitude of variations in rheological properties induced by the addition time of PCE-superplasticizer. In: Construction and Building Materials, v. 159 (January 2018).
- (2020): Investigation on influential factors on chloride concentration index of cement-based materials by pore solution expression method. In: Construction and Building Materials, v. 231 (January 2020).
- (2019): Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars. In: Construction and Building Materials, v. 222 (October 2019).
- (2010): Micro-analysis of the role of interfacial transition zone in "salt weathering" on concrete. In: Construction and Building Materials, v. 24, n. 11 (November 2010).
- (2013): A microscopic study on ternary blended cement based composites. In: Construction and Building Materials, v. 46 (September 2013).
- (2014): Influence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution. In: Construction and Building Materials, v. 52 (February 2014).
- (2016): Modelling the carbonation of cement pastes under a CO 2 pressure gradient considering both diffusive and convective transport. In: Construction and Building Materials, v. 114 (July 2016).
- (2016): Modelling the evolution of microstructure and transport properties of cement pastes under conditions of accelerated leaching. In: Construction and Building Materials, v. 115 (July 2016).
- (2019): Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification. In: Construction and Building Materials, v. 198 (February 2019).
- (2015): Influence of the Interfacial Transition Zone and Interconnection on Chloride Migration of Portland Cement Mortar. In: Journal of Advanced Concrete Technology, v. 13, n. 3 ( 2015).
- (2015): Modification of existing shape factor models for self-compacting concrete strength by means of Bayesian updating techniques. In: Materials and Structures, v. 48, n. 4 (April 2015).
- (2015): Influence of self-compacting concrete fresh properties on bond to reinforcement. In: Materials and Structures, v. 48, n. 6 (June 2015).
- (2011): Monitoring the early-age hydration of self-compacting concrete using ultrasonic p-wave transmission and isothermal calorimetry. In: Materials and Structures, v. 44, n. 8 (October 2011).
- (2015): Managing Zn wastes in C3S: comparison of two incorporation methods. In: Materials and Structures, v. 48, n. 8 (August 2015).
- (2014): Influence of the composition of powder-type SCC on conversion factors for compressive strength. In: Magazine of Concrete Research, v. 66, n. 6 (March 2014).
- (2015): Influence of the viscosity of self-compacting concrete and the presence of rebars on the formwork pressure while filling bottom-up. In: Engineering Structures, v. 101 (October 2015).
Structurae cooperates with
