- A numerical model for non-linear shear behavior of high damping rubber bearings. In: Engineering Structures, v. 289 (August 2023). (2023):
- A design procedure for buildings equipped with energy dissipation devices using nonclassical damping and iso-performance curves. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 2 (February 2019). (2019):
- Full‐scale shaking table test and numerical modeling of a 3000‐liter legged storage tank isolated with a vertical rocking isolation system. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 6 (May 2022). (2022):
- Damage and sensitivity analysis of a reinforced concrete wall building during the 2010, Chile earthquake. In: Engineering Structures, v. 240 (August 2021). (2021):
- A physical model for dynamic analysis of wine barrel stacks. In: Earthquake Engineering and Structural Dynamics, v. 39, n. 10 (August 2010). (2010):
-
Modelling aspects of structures isolated with the frictional pendulum system. In: Earthquake Engineering and Structural Dynamics, v. 27, n. 8 (August 1998).
https://doi.org/10.1002/(sici)1096-9845(199808)27:8<845::aid-eqe760>3.0.co;2-t
(1998): -
A macro-element model for inelastic building analysis. In: Earthquake Engineering and Structural Dynamics, v. 29, n. 12 (December 2000).
https://doi.org/10.1002/1096-9845(200012)29:12<1725::aid-eqe982>3.0.co;2-4
(2000): - Analytical model of structures with frictional pendulum isolators. In: Earthquake Engineering and Structural Dynamics, v. 31, n. 2 (February 2002). (2002):
- regularized fiber element model for reinforced concrete shear walls. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 13 (25 October 2016). (2016):
- Study of the damage of reinforced concrete shear walls during the 2010 Chile earthquake. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 10 (August 2016). (2016):
- Accidental torsion in buildings due to base rotational excitation. In: Earthquake Engineering and Structural Dynamics, v. 23, n. 9 (September 1994). (1994):
- Physical model for dynamic analysis of structures with FPS isolators. In: Earthquake Engineering and Structural Dynamics, v. 32, n. 8 (10 July 2003). (2003):
- An experimental study of nominally symmetric and asymmetric structures isolated with the FPS. In: Earthquake Engineering and Structural Dynamics, v. 32, n. 6 (May 2003). (2003):
- Accidental torsion due to overturning in nominally symmetric structures isolated with the FPS. In: Earthquake Engineering and Structural Dynamics, v. 32, n. 6 (May 2003). (2003):
- Earthquake behavior of structures with copper energy dissipators. In: Earthquake Engineering and Structural Dynamics, v. 33, n. 3 (March 2004). (2004):
- Analysis, testing, and implementation of seismic isolation of buildings in Chile. In: Earthquake Engineering and Structural Dynamics, v. 33, n. 5 (25 April 2004). (2004):
- Tall building vibration control using a TM-MR damper assembly: Experimental results and implementation. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 3 (March 2011). (2011):
- Tall building vibration control using a TM-MR damper assembly. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 3 (March 2011). (2011):
- A comparative study of concentrated plasticity models in dynamic analysis of building structures. In: Earthquake Engineering and Structural Dynamics, v. 34, n. 8 (10 July 2005). (2005):
- Three-dimensional behavior of a spherical self-centering precast prestressed pile isolator. In: Earthquake Engineering and Structural Dynamics, v. 38, n. 5 (25 April 2009). (2009):
- A simplified model for the analysis of free plan buildings using a wide-column model. In: Engineering Structures, v. 56 (November 2013). (2013):
- Linear isolation of stainless steel legged thin-walled tanks. In: Engineering Structures, v. 29, n. 7 (July 2007). (2007):
- A bidirectional and homogeneous tuned mass damper: A new device for passive control of vibrations. In: Engineering Structures, v. 29, n. 7 (July 2007). (2007):
- Base–structure interaction of linearly isolated structures with lateral–torsional coupling. In: Engineering Structures, v. 30, n. 1 (January 2008). (2008):
- Experimental behavior and design of a new kinematic isolator. In: Engineering Structures, v. 32, n. 2 (February 2010). (2010):
- Optimized friction pendulum and precast-prestressed pile to base-isolate a Chilean masonry house. In: Bulletin of Earthquake Engineering, v. 8, n. 4 (November 2009). (2009):
- Epistemic uncertainty in the seismic response of RC free-plan buildings. In: Engineering Structures, v. 141 (June 2017). (2017):
- Analysis of a kinematic self-centring seismic isolator. In: Earthquake Engineering and Structural Dynamics, v. 35, n. 12 (10 October 2006). (2006):
- Inelastic Behavior of Asymmetric Multistory Buildings. In: Journal of Structural Engineering (ASCE), v. 122, n. 6 (June 1996). (1996):
- Estimation of Accidental Torsion Effects for Seismic Design of Buildings. In: Journal of Structural Engineering (ASCE), v. 121, n. 1 (January 1995). (1995):