Oguzhan Copuroglu 
- (2024): Effect of hydroxypropyl methylcellulose and aggregate volume on fresh and hardened properties of 3D printable concrete. In: Construction and Building Materials, v. 456 (December 2024).
- (2024): Evaluation of thermal insulation capacity and mechanical performance of a novel low-carbon thermal insulating foam concrete. In: Energy and Buildings, v. 323 (November 2024).
- (2023): Improving structural build-up of limestone-calcined clay-cement pastes by using inorganic additives. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?. In: Construction and Building Materials, v. 371 (March 2023).
- (2024): Correlation between Slag Reactivity and Cement Paste Properties: The Influence of Slag Chemistry. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (March 2024).
- (2023): Effect of P2O5 incorporated in slag on the hydration characteristics of cement-slag system. In: Construction and Building Materials, v. 377 (May 2023).
- (2008): Modeling of frost salt scaling. In: Cement and Concrete Research, v. 38, n. 1 (January 2008).
- (2020): Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture. In: Cement and Concrete Research, v. 132 (June 2020).
- (2011): Hydration and microstructure of ultra high performance concrete incorporating rice husk ash. In: Cement and Concrete Research, v. 41, n. 11 (November 2011).
- (2022): The effect of slag chemistry on CO2 binding capacity of C3S-slag (-gypsum) system. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Influence of self-healing induced by polylactic-acid and alkanoates-derivates precursors on transport properties and chloride penetration resistance of sound and cracked mortar specimens. In: Construction and Building Materials, v. 319 (February 2022).
- (2022): The effect of slag chemistry on the reactivity of synthetic and commercial slags. In: Construction and Building Materials, v. 335 (June 2022).
- (2022): Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials. In: Construction and Building Materials, v. 332 (May 2022).
- (2022): Effect of slags of different origins and the role of sulfur in slag on the hydration characteristics of cement-slag systems. In: Construction and Building Materials, v. 316 (January 2022).
- (2022): A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing. In: Journal of Building Engineering, v. 45 (January 2022).
- (2017): The compartmented alginate fibres optimisation for bitumen rejuvenator encapsulation. In: Journal of Traffic and Transportation Engineering (English Edition), v. 4, n. 4 (August 2017).
- (2021): Sodium silicate/polyurethane microcapsules synthesized for enhancing self-healing ability of cementitious materials: Optimization of stirring speeds and evaluation of self-healing efficiency. In: Journal of Building Engineering, v. 39 (July 2021).
- (2021): On the Applicability of a Precursor Derived from Organic Waste Streams for Bacteria-Based Self-Healing Concrete. In: Frontiers in Built Environment, v. 7 (January 2021).
- (2021): Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag. In: Journal of Building Engineering, v. 34 (February 2021).
- (2021): Elephant skin formation on UHPC surface: Effects of climatic condition and blast furnace slag content. In: Construction and Building Materials, v. 268 (January 2021).
- (2020): Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study. In: Construction and Building Materials, v. 262 (November 2020).
- (2018): Expansion and degradation of cement paste in sodium sulfate solutions. In: Construction and Building Materials, v. 158 (January 2018).
- (2020): The influence of defects at the steel/concrete interface for chloride-induced pitting corrosion of naturally-deteriorated 20-years-old specimens studied through X-ray Computed Tomography. In: Construction and Building Materials, v. 235 (February 2020).
- (2019): Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure. In: Construction and Building Materials, v. 212 (July 2019).
- (2016): Influence of the Alkali-Silica Reaction on the Mechanical Degradation of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 6 (June 2016).
- (2016): Quantitative Energy-Dispersive X-Ray Microanalysis of Chlorine in Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (January 2016).
- (2017): Lithium migration in a two-chamber set-up as treatment against expansion due to alkali–silica reaction. In: Construction and Building Materials, v. 134 (March 2017).
- (2013): Mechanical, Electrical and Microstructural Properties of Cement-Based Materials in Conditions of Stray Current Flow. In: Journal of Advanced Concrete Technology, v. 11, n. 3 ( 2013).
- (2010): Effect of Silica Dissolution on the Mechanical Characteristics of Alkali-Reactive Aggregates. In: Journal of Advanced Concrete Technology, v. 8, n. 1 ( 2010).
Structurae cooperates with
