Sang-Yeop Chung 
- (2024): Investigation of gradient properties for cement mortar interfacial transition zones and their effects on mechanical characteristics using micro-CT. In: Developments in the Built Environment, v. 18 (April 2024).
- (2024): The effect of interlayer adhesion on stress distribution in 3D printed beam elements. In: Journal of Building Engineering, v. 87 (June 2024).
- (2023): Hydration simulation of cement pastes reinforced with carbon nanotubes. In: Construction and Building Materials, v. 384 (June 2023).
- (2023): Microstructural investigation of mortars incorporating cockle shell and waste fishing net. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Effect of polymer binder on the mechanical and microstructural properties of pervious pavement materials. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): Effects of cement particle distribution on the hydration process of cement paste in three-dimensional computer simulation. In: Construction and Building Materials, v. 311 (December 2021).
- (2021): Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes. In: Construction and Building Materials, v. 284 (May 2021).
- (2021): The effects of nanosilica on the fresh and hardened properties of 3D printable mortars. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Characterization of foamed concrete with different additives using multi-scale micro-computed tomography. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Pore and Solid Characterizations of Interfacial Transition Zone of Mortar Using Microcomputed Tomography Images. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2016): Investigation of the effects of anisotropic pores on material properties of insulating concrete using computed tomography and probabilistic methods. In: Energy and Buildings, v. 125 (August 2016).
- (2020): Evaluating the effects of nanosilica on the material properties of lightweight and ultra-lightweight concrete using image-based approaches. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Modeling of multiple phase solid microstructures and prediction of mechanical behaviors of foamed concrete. In: Construction and Building Materials, v. 248 (July 2020).
- (2018): Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process. In: Construction and Building Materials, v. 179 (August 2018).
- (2019): Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials. In: Construction and Building Materials, v. 229 (December 2019).
- (2019): Comparison of lightweight aggregate and foamed concrete with the same density level using image-based characterizations. In: Construction and Building Materials, v. 211 (June 2019).
- (2015): Evaluation of permeability of concrete specimens affected by chloride attack using reconstruction and probabilistic description methods. Presented at: IABSE Conference: Elegance in structures, Nara, Japan, 13-15 May 2015.
- (2019): Issues on characterization of cement paste microstructures from μ-CT and virtual experiment framework for evaluating mechanical properties. In: Construction and Building Materials, v. 202 (March 2019).
- (2013): Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): Investigation of the permeability of porous concrete reconstructed using probabilistic description methods. In: Construction and Building Materials, v. 66 (September 2014).
- (2015): Reconstruction and evaluation of the air permeability of a cement paste specimen with a void distribution gradient using CT images and numerical methods. In: Construction and Building Materials, v. 87 (July 2015).
- (2016): Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography. In: Construction and Building Materials, v. 118 (August 2016).
- (2016): Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples. In: Construction and Building Materials, v. 111 (May 2016).
- (2019): Effect of different expanded aggregates on the properties of lightweight concrete. In: Magazine of Concrete Research, v. 71, n. 2 (January 2019).
- (2013): Evaluation of hydraulic conductivity of reconstructed granular media generated using low-order probability functions. In: KSCE Journal of Civil Engineering, v. 18, n. 1 (November 2013).
- (2017): The Effects of Anisotropic Insulations with Different Spatial Distributions on Material Properties of Mortar Specimens. In: International Journal of Concrete Structures and Materials, v. 11, n. 4 (December 2017).
- (2018): Effects of expanded polystyrene (EPS) sizes and arrangements on the properties of lightweight concrete. In: Materials and Structures, v. 51, n. 3 (June 2018).
- (2013): Correlation between low-order probability distribution functions and percolation of porous concrete. In: Magazine of Concrete Research, v. 65, n. 7 (April 2013).
- (2018): The influence of different concrete additions on the properties of lightweight concrete evaluated using experimental and numerical approaches. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
