Sung-Chul Chun 
- (2012): Development and Structural Assessment of Joints of Permanent Uni-Wall System and Floor Systems in Substructure. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 12, n. 2 (April 2012).
- (2006): CWS공법(buried wale Continuous Wall System)의 개발에 관한 연구 (Study on Development of CWS (buried wale Continuous Wall System) Method). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 6, n. 2 (June 2006).
- (2023): Side-Face Blowout Strength of Large-Diameter High-Strength Headed Bars in a Single Layer or Two Layers Terminated within Exterior Beam–Column Joints. In: Journal of Structural Engineering (ASCE), v. 149, n. 2 (February 2023).
- (2022): SC벽체-RC벽체 수평면 접합부의 면외 휨 거동에 대한 실험적 평가 (Experimental Evaluation of Out-of-Plane Flexural Response of Connections Between SC Wall and RC Wall in Parallel). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 34, n. 2 (27 April 2022).
- (2018): Components of Side-Face Blowout Strengths. of Headed Bars in Exterior Beam-Column Joints. In: ACI Structural Journal, v. 116, n. 2 (March 2018).
- (2017): Side-Face Blowout Failure of Large-Diameter High-Strength Headed Bars in Beam-Column Joints. In: ACI Structural Journal, v. 114, n. 1 (January 2017).
- (2018): The effect of water and gypsum content on strätlingite formation in calcium sulfoaluminate-belite cement pastes. In: Construction and Building Materials, v. 166 (March 2018).
- (2018): Tensile Strength of Post-Installed High-Shear Ring Anchors (HRA) After Shear Loading. In: Journal of the Korean Association for Spatial Structures (한국공간구조학회논문집), v. 18, n. 4 (15 December 2018).
- (2015): Lap Splice Tests Using High-Strength Headed Bars of 550 MPa (80 ksi) Yield Strength. In: ACI Structural Journal, v. 112, n. 6 (November 2015).
- (2014): Cyclic Testing of Exterior Beam-Column Joints with Varying Joint Aspect Ratio. In: ACI Structural Journal, v. 111, n. 3 (May 2014).
- (2016): Strength enhancement of alkaline activated fly ash cured at ambient temperature by delayed activation of substituted OPC. In: Construction and Building Materials, v. 122 (September 2016).
- (2015): Behavior and strengths of single cast-in anchors in Ultra-High-Performance Fiber-Reinforced Concrete (UHPFRC) subjected to a monotonic tension or shear. In: KSCE Journal of Civil Engineering, v. 19, n. 4 (February 2015).
- (2010): Simplified Design Equation of Lap Splice Length in Compression. In: International Journal of Concrete Structures and Materials, v. 4, n. 1 (June 2010).
- (2012): Bond strength of glass fibre-reinforced polymer bars in unconfined concrete. In: Engineering Structures, v. 34 (January 2012).
- (2016): Safety and Serviceability of Reinforced Concrete Beam-Column Joints Supported by Shores and Reshores during Construction. In: Journal of Structural Engineering (ASCE), v. 142, n. 7 (July 2016).
- (2009): Flexural Test of a Composite Beam Using Asymmetric Steel Section with Web Openings. In: Journal of Structural Engineering (ASCE), v. 135, n. 4 (April 2009).
Structurae cooperates with
