Chung-Che Chou 
- (2024): Development of a Compression-Only Self-Centering Brace with Buckling-Restrained Bars for Energy Dissipation. In: Journal of Structural Engineering (ASCE), v. 150, n. 9 (September 2024).
- (2023): Cyclic test and finite element analysis of a steel double K-braced frame with laterally-restrained plates for RC building retrofit. In: Thin-Walled Structures, v. 189 (August 2023).
- (2024): Near-Fault Response and Loading Protocols of Box Columns in Steel Frames with Self-Centering Braces to Provide Recentering Capability. In: Advances in Civil Engineering, v. 2024 (January 2024).
- (2023): Estimation of the Seismically Induced Residual Drift of Structures from Measured Acceleration. In: Journal of Earthquake Engineering, v. 28, n. 5 (July 2023).
- (2023): Effects of Section Compactness and SCWB Condition on Moment Redistribution and Plastic Hinging in SMF Built-Up Box Columns. In: Journal of Structural Engineering (ASCE), v. 149, n. 11 (November 2023).
- (2021): Cyclic flexural test and loading protocol for steel wind turbine tower columns. In: Thin-Walled Structures, v. 166 (September 2021).
- (2021): Mechanics, modeling and seismic behavior of a dual-core self-centering brace in series with a frictional gusset connection. In: Engineering Structures, v. 247 (November 2021).
- (2011): Analytical model validation and influence of column bases for seismic responses of steel post-tensioned self-centering MRF systems. In: Engineering Structures, v. 33, n. 9 (September 2011).
- (2015): A novel composite bridge for emergency disaster relief: Concept and verification. In: Composite Structures, v. 127 (September 2015).
- (2020): Lateral cyclic testing and backbone curve development of high-strength steel built-up box columns under axial compression. In: Engineering Structures, v. 223 (November 2020).
- (2018): Development and validation of a FRP-wrapped spiral corrugated tube for seismic performance of circular concrete columns. In: Construction and Building Materials, v. 170 (May 2018).
- (2016): Cyclic tests of steel frames with composite lightweight infill walls. In: Earthquakes and Structures, v. 10, n. 1 (January 2016).
- (2010): Column restraint in post-tensioned self-centering moment frames. In: Earthquake Engineering and Structural Dynamics, v. 39, n. 7 (June 2010).
- (2019): Cyclic lateral load test and finite element analysis of high-strength concrete-filled steel box columns under high axial compression. In: Engineering Structures, v. 189 (June 2019).
- (2002): Cyclic performance of a type of steel beam to steel-encased reinforced concrete column moment connection. In: Journal of Constructional Steel Research, v. 58, n. 5-8 (January 2002).
- (2009): Compressive behavior of central gusset plate connections for a buckling-restrained braced frame. In: Journal of Constructional Steel Research, v. 65, n. 5 (May 2009).
- (2011): Development of floor slab for steel post-tensioned self-centering moment frames. In: Journal of Constructional Steel Research, v. 67, n. 10 (October 2011).
- (2013): Internal flange stiffened moment connections with low-damage capability under seismic loading. In: Journal of Constructional Steel Research, v. 87 (August 2013).
- (2012): Compressive behavior of dual-gusset-plate connections for buckling-restrained braced frames. In: Journal of Constructional Steel Research, v. 76 (September 2012).
- (2014): Development of cross-anchored dual-core self-centering braces for seismic resistance. In: Journal of Constructional Steel Research, v. 101 (October 2014).
-
(2000): Establishing absorbed energy spectra?an attenuation approach. In: Earthquake Engineering and Structural Dynamics, v. 29, n. 10 (October 2000).
https://doi.org/10.1002/1096-9845(200010)29:10<1441::aid-eqe967>3.0.co;2-e
- (2006): Cyclic tests of post-tensioned precast CFT segmental bridge columns with unbonded strands. In: Earthquake Engineering and Structural Dynamics, v. 35, n. 2 (February 2006).
- (2008): Hysteretic model development and seismic response of unbonded post-tensioned precast CFT segmental bridge columns. In: Earthquake Engineering and Structural Dynamics, v. 37, n. 6 (May 2008).
- (2016): Experimental evaluation of large-scale dual-core self-centering braces and sandwiched buckling-restrained braces. In: Engineering Structures, v. 116 (June 2016).
- (2016): Development and validation tests of a dual-core self-centering sandwiched buckling-restrained brace (SC-SBRB) for seismic resistance. In: Engineering Structures, v. 121 (August 2016).
- (2018): Gusset design considering buckling forces in frame and brace action directions: Test and finite element analysis of a self-centering braced frame for verification. In: Engineering Structures, v. 173 (October 2018).
- (2006): Evaluating performance of post-tensioned steel connections with strands and reduced flange plates. In: Earthquake Engineering and Structural Dynamics, v. 35, n. 9 (25 July 2006).
- (2007): Effects of Continuity Plate and Transverse Reinforcement on Cyclic Behavior of SRC Moment Connections. In: Journal of Structural Engineering (ASCE), v. 133, n. 1 (January 2007).
- (2017): Education of Future Builders Through Footbridge Design to Construction Projects. Presented at: Footbridge 2017 Berlin - Tell A Story, 6-8.9.2017, Technische Universität Berlin (TU Berlin).
- (2007): Hysteretic Model Development and Seismic Response of Unbonded Post-Tensioned Precast CFT Segmental Bridge Columns. Presented at: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
Structurae cooperates with
