Soon-Wook Choi
- (2014): Analysis of segment lining cracking load considering axial force by varying boundary condition. In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 16, n. 2 ( 2014).
- (2013): 선형절삭실험 중 디스크커터 축에 작용하는 하중과 온도에 대한 실험적 연구 (An experimental study on the loads and temperature acting on the shaft of a disc cutter during linear rock cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2013): 커터 링의 형상에 따른 디스크커터 작용력의 실험적 평가 (Experimental evaluation of the effects of cutting ring shape on cutter acting forces in a hard rock). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2017): 차수용 박층 멤브레인 설치에 따른 콘크리트 라이닝의 구조적 보강효과에 관한 수치해석 연구 (Numerical study on structural reinforced effects of concrete lining by spray-applied waterproofing membrane). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 19, n. 3 (May 2017).
- (2017): 뿜어붙임멤브레인의 방수성능 및 염수저항성의 기초평가 (A preliminary study of watertightness and salt water resistance of spray-applied membrane). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 19, n. 2 (March 2017).
- (2016): 주방식 지하구조물의 발파 굴착공정 분석 연구 (A study on the excavation cycle by the drill-and-blast method for a room-and-pillar underground structure). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 18, n. 6 (November 2016).
- (2016): 선형절삭시험에 의한 코니컬커터의 삽입재 크기에 따른 절삭성능 평가 (Performance estimation depending on the insert size of conical picks by linear cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 18, n. 2 (31 March 2016).
- (2015): A 최적의 비개착공법 선정을 위한 계층분석법의 적용에 관한 기초연구 (preliminary study on the use of analytic hierarchy process for selecting a optimum trenchless excavation method). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 6 (30 November 2015).
- (2012): An 고강도 콘크리트와 고장력 철근을 적용한 쉴드 세그먼트의 역학적 거동에 대한 실험적 연구 (experimental study on mechanical behavior of shield segment with high-strength concrete and high-tension rebar). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 3 (31 May 2012).
- (2012): 암석의 선형절삭실험에 의한 디스크커터의 변형특성 평가 (Characterization of the deformation of a disc cutter in linear rock cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 3 (31 May 2012).
- (2015): A 주방식 지하구조물의 최적 굴착공정에 대한 예비 분석 연구 (preliminary study on the optimum excavation sequence of a room-and-pillar underground structure). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 4 (31 July 2015).
- (2015): 현장적용 디스크커터의 내부부품 분석 (Analysis of inner parts in the disc cutters applied to the field tests). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 4 (31 July 2015).
- (2015): 국산 커터헤드를 장착한 직경 3.6 m 토압식 쉴드TBM의 제작과 현장적용성 분석 (Refurbishment of a 3.6 m earth-pressure balanced shield TBM with a domestic cutterhead and its field verification). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 4 (31 July 2015).
- (2012): An 사각형 강관을 이용한 비개착 시공에 따른 지반거동의 분석: 모래지반에 대한 모형 토조실험 (experimental study on the ground movement around a square pipe by its penetration for trenchless construction in sandy ground). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 5 (30 September 2012).
- (2012): A 사각형 강관을 이용한 비개착 시공에 따른 지반거동의 분석: 수치해석 (numerical study on the three-dimensional ground movement by the trenchless construction method of concrete box by a square steel pipe supporting system). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 5 (30 September 2012).
- (2013): An 터널 지보재로서의 적용성 검토를 위한 박층 뿜칠 라이너의 부착성능과 지보성능의 평가 (experimental study on bonding and bearing capacities of thin spray-on liner to evaluate its applicability as a tunnel support member). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 6 (30 November 2013).
- (2015): 강섬유 보강 콘크리트의 전자파 차폐효과 (Electromagnetic wave shielding effectiveness of steel fiber reinforced concrete). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 2 ( 2015).
- (2006): Performance prediction of TBM disc cutting on granitic rock by the linear cutting test. In: Tunnelling and Underground Space Technology, v. 21, n. 3-4 (May 2006).
- (2013): A holistic numerical approach to simulating the thermal and mechanical behaviour of a tunnel lining subject to fire. In: Tunnelling and Underground Space Technology, v. 35 (April 2013).
- (2018): Numerical approach to assessing the contact characteristics of a polymer-based waterproof membrane. In: Tunnelling and Underground Space Technology, v. 79 (September 2018).
- (2016): Determination of the combined heat transfer coefficient to simulate the fire-induced damage of a concrete tunnel lining under a severe fire condition. In: Tunnelling and Underground Space Technology, v. 54 (April 2016).
Structurae cooperates with
