Se-Jin Choi 
- (2017): Applicability of Stone Powder Sludge as a Substitute Material for Quartz Sand in Autoclaved Aerated Concrete. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 17, n. 1 (February 2017).
- (2009): 석탄회 종류에 따른 석탄회를 대량 사용한 콘크리트의 내구특성에 관한 연구 (A Study on the Durabilities of High Volume Coal Ash Concrete by the Kinds of Coal Ash). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 9, n. 3 (June 2009).
- (2007): 혼화재 종류 및 치환율에 따른 모르터의 조기강도 특성에 관한 연구 (A study on the Early-Strength Properties of Mortar according to the Kinds and Replacement Ratio of Mineral Admixture). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 7, n. 2 (June 2007).
- (2007): 부순모래를 사용한 고강도콘크리트의 특성 및 레미콘 B/P 적용에 관한 연구 (A Study on the Remicon B/P Application and Properties of High Strength Concrete using Crushed Sand). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 7, n. 1 (March 2007).
- (2005): 수도권 부순모래의 품질현황 및 부순모래 대체율에 따른 콘크리트의 특성에 관한 연구 (An Experimental Study on the Properties of Crushed Sand in Capital Region and Concrete according to the Replacement Ratio of Crushed Sand). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 5, n. 1 (March 2005).
- (2002): 적산온도 기법을 활용한 건설생산현장에서의 강도예측모델 개발에 관한 연구 (A Study on Development of Strength Prediction Model for Construction Field by Maturity Method). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 2, n. 4 (December 2002).
- (2023): Effect of replacement ratio of ferronickel slag aggregate on characteristics of cementitious mortars at different curing temperatures. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2014): Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites. In: Composite Structures, v. 107 (January 2014).
- (2010): Use of Stone Powder Sludge in Fly Ash-Based Geopolymer. In: Architectural Research, v. 12, n. 1 (June 2010).
- (2014): Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes. In: Construction and Building Materials, v. 63 (July 2014).
- (2015): Carbon reduction of precast concrete under the marine environment. In: Construction and Building Materials, v. 74 (January 2015).
- (2015): Rheological and mechanical properties of fiber-reinforced alkali-activated composite. In: Construction and Building Materials, v. 96 (October 2015).
- (2018): Compressive Strength and Microstructure Properties of Alkali-Activated Systems with Blast Furnace Slag, Desulfurization Slag, and Gypsum. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2015): Restrained shrinkage cracking of amorphous metallic fibre-reinforced concrete. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 168, n. 12 (December 2015).
- (2018): Effect of Ferronickel Slag Powder on Microhydration Heat, Flow, Compressive Strength, and Drying Shrinkage of Mortar. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
