Hyeonggil Choi 
- (2024): Protection and Heat Insulation Performance Comparison using Insulation Formwork in Winter. In: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 January 2024).
- (2024): Alkali-Silica Reaction and Residual Mechanical Properties of High-Strength Mortar Containing Waste Glass Fine Aggregate and Supplementary Cementitious Materials. In: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 January 2024).
- (2016): 양생조건에 따른 섬유보강 시멘트계 복합재료(FRCC)의 균열 자기치유 특성 (Self-Healing Properties of Fiber-Reinforced Cement Composite (FRCC) Depending on Various Curing Conditions). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 16, n. 4 (August 2016).
- (2021): Development of formwork automation design software for improving construction productivity. In: Automation in Construction, v. 126 (June 2021).
- (2019): Modeling early age hydration reaction and predicting compressive strength of cement paste mixed with expansive additives. In: Construction and Building Materials, v. 223 (October 2019).
- (2015): Modeling of volume changes of concrete mixed with expansive additives. In: Construction and Building Materials, v. 75 (January 2015).
- (2015): Restrained shrinkage behavior of expansive mortar at early ages. In: Construction and Building Materials, v. 84 (June 2015).
- (2016): Physical and chemical properties of concrete using GGBFS-KR slag-gypsum binder. In: Construction and Building Materials, v. 123 (October 2016).
- (2017): Compressive strength development and durability of an environmental load-reduction material manufactured using circulating fluidized bed ash and blast-furnace slag. In: Construction and Building Materials, v. 146 (August 2017).
- (2017): Method for determining early-age frost damage of concrete by using air-permeability index and influence of early-age frost damage on concrete durability. In: Construction and Building Materials, v. 153 (October 2017).
- (2015): Modeling of Mechanical Properties of Concrete Mixed with Expansive Additive. In: International Journal of Concrete Structures and Materials, v. 9, n. 4 (December 2015).
- (2017): Evaluation of the combined deterioration by freeze–thaw and carbonation of mortar incorporating BFS, limestone powder and calcium sulfate. In: Materials and Structures, v. 50, n. 3 (June 2017).
- (2015): Modelling of creep of concrete mixed with expansive additives. In: Magazine of Concrete Research, v. 67, n. 7 (April 2015).
- (2018): Influence of Silicone Oil on Durability of Portland Blast Furnace Slag Cement Mortar. In: Journal of Advanced Concrete Technology, v. 16, n. 2 ( 2018).
- (2016): Evaluation on the Mechanical Performance of Low-Quality Recycled Aggregate Through Interface Enhancement Between Cement Matrix and Coarse Aggregate by Surface Modification Technology. In: International Journal of Concrete Structures and Materials, v. 10, n. 1 (March 2016).
Structurae cooperates with
