Xin Cheng 
- (2024): P-removal characteristics, mechanism analysis and application of functional aggregate with core-shell structure. In: Construction and Building Materials, v. 447 (October 2024).
- (2024): Optimization design of ultra-fine supplementary cementitious materials ultra-high performance concrete mix proportion based on orthogonal experiment. In: Construction and Building Materials, v. 453 (November 2024).
- (2024): Influence of additional components on mechanical and shrinkage properties of high performance cementitious grouting materials. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Improving the frost-resistance performance of supersulfated cement by reducing the crystalline-to-gel ratio through the addition of nano-SiO2. In: Construction and Building Materials, v. 424 (April 2024).
- (2024): Hysteretic behaviors of square hollow column-truss beam-diagonal brace connections in steel buildings. In: Journal of Constructional Steel Research, v. 212 (January 2024).
- (2021): Mechanisms dominating thixotropy in limestone calcined clay cement (LC3). In: Cement and Concrete Research, v. 140 (February 2021).
- (2022): Improvement of the durability of cement-based material through surface modification with nano-engineered releasing agents. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Influence of Propagation Distance on Characteristic Parameters of Acoustic Emission Signals in Concrete Materials Based on Low-Frequency Sensor. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Mechanical and chloride ions solidification performance of C4A3($,P) mineral as promising marine engineering material. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Monitoring the damage evolution of reinforced concrete during tunnel boring machine hoisting by acoustic emission. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Improving the cracking resistance of mortar by reduced graphene oxide. In: Construction and Building Materials, v. 310 (December 2021).
- (2021): Improvement of intrinsic self-healing ability of concrete by adjusting aggregate gradation and sand ratio. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Optimisation of sacrificial anode cathodic protection system in chloride-contaminated reinforced concrete structure. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): The Impact of Extended Heat Exposure on Rapid Sulphoaluminate Cement Concrete Up To 120°C. In: Periodica Polytechnica Civil Engineering, v. 65, n. 2 ( 2021).
- (2020): Insights into the properties and chloride binding capacity of β-hemihydrate in the presence of slag powder and white calcium aluminate cement. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): Numerical modeling of the effect of concrete porosity evolution on electrochemical chloride removal from concrete structures. In: Construction and Building Materials, v. 267 (January 2021).
- (2021): A new method for preparing photocatalytic cement-based materials and the investigation on properties and mechanism. In: Journal of Building Engineering, v. 35 (March 2021).
- (2021): Optimizing the content of nano-SiO2, nano-TiO2 and nano-CaCO3 in Portland cement paste by response surface methodology. In: Journal of Building Engineering, v. 35 (March 2021).
- (2020): The non-uniform spatial dispersion of graphene oxide: A step forward to understand the inconsistent properties of cement composites. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Hydration mechanisms of Ba-doped ye'elimite: Effect of Ba/Ca ratio on hydration behavior. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): The influence of inorganic admixtures on early cement hydration from the point of view of thermodynamics. In: Construction and Building Materials, v. 259 (October 2020).
- (2018): Interval Estimations of Building Heating Energy Consumption using the Degree-Day Method and Fuzzy Numbers. In: Buildings, v. 8, n. 2 (January 2018).
- (2013): An overview study on cross-section classification of steel H-sections. In: Journal of Constructional Steel Research, v. 80 (January 2013).
- (2010): Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor. In: Construction and Building Materials, v. 24, n. 12 (December 2010).
- (2015): Influences of nano-TiO2 on the properties of cement-based materials: Hydration and drying shrinkage. In: Construction and Building Materials, v. 81 (April 2015).
- (2016): ITZ properties of concrete with carbonated steel slag aggregate in salty freeze-thaw environment. In: Construction and Building Materials, v. 114 (July 2016).
- (2016): In situ Ca(OH) 2 consumption of TEOS on the surface of hardened cement-based materials and its improving effects on the Ca-leaching and sulfate-attack resistivity. In: Construction and Building Materials, v. 113 (June 2016).
- (2017): The influence of ethanol-diisopropanolamine on the hydration and mechanical properties of Portland cement. In: Construction and Building Materials, v. 135 (March 2017).
- (2017): Hydration for the Alite mineral: Morphology evolution, reaction mechanism and the compositional influences. In: Construction and Building Materials, v. 155 (November 2017).
- (2007): An investigation on 1–3 cement based piezoelectric composites. In: Smart Materials and Structures, v. 16, n. 4 (August 2007).
Structurae cooperates with
