Yung-Tsang Chen 
- (2024): Seismic performance of reinforced concrete beam-column joints with diagonal bars wrapped by steel tubes: experimental, numerical and analytical study. In: Structures, v. 59 (January 2024).
- (2023): Active Microvibration Control of Tool Platforms Installed on the Floors Subjected to Moving Vehicles in Industrial Factories. In: Structural Control and Health Monitoring, v. 2023 (February 2023).
- (2023): Mechanical properties and cracking behaviour of lightweight engineered geopolymer composites with fly ash cenospheres. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Role of limestone powder in alkali-activated slag paste with superabsorbent polymer. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Effects of Polyethylene Fiber Dosage and Length on the Properties of High-Tensile-Strength Engineered Geopolymer Composite. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2023): Microstructure refinement and shrinkage mitigation of alkali-activated slag paste by superabsorbent polymer. In: Construction and Building Materials, v. 375 (April 2023).
- (2023): Impact of heat curing regime on the compressive strength and drying shrinkage of alkali-activated slag mortar. In: Developments in the Built Environment, v. 14 (April 2023).
- (2023): Investigation on the roles of glass sand in sustainable engineered geopolymer composites. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Seismic Vibration Control of Atrium Buildings Using a Truss-Nonlinear Inertial Mass Damper System. In: International Journal of Structural Stability and Dynamics, v. 22, n. 14 (September 2022).
- (2022): Numerical study on flexural behaviour of FRP reinforced concrete beams with compression yielding blocks. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Fragility analysis of floor micro vibrations induced by internal vehicles in high technology factories. In: Structures, v. 40 (June 2022).
- (2024): Seismic vibration control of discontinuous suspended ceilings in semiconductor and LCD fabs. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 177, n. 1 (January 2024).
- (2022): Experimental and numerical study on reinforced concrete beam-column joints with diagonal bars: Effects of bonding condition and diameter. In: Structures, v. 37 (March 2022).
- (2022): Relocating plastic hinges in reinforced concrete beam-column joints by mechanically anchored diagonal bars. In: Engineering Structures, v. 251 (January 2022).
- (2021): Effects of Brace Stiffness and Nonlinearity of Viscous Dampers on Seismic Performance of Structures. In: International Journal of Structural Stability and Dynamics, v. 21, n. 13 (September 2021).
- (2021): Experimental study on seismic vibration control of stockers in wafer and LCD panel fabs. In: Structures, v. 31 (June 2021).
- (2017): Separating damage from environmental effects affecting civil structures for near real-time damage detection. In: Structural Health Monitoring, v. 17, n. 4 (July 2017).
- (2021): A regression-based damage detection method for structures subjected to changing environmental and operational conditions. In: Engineering Structures, v. 228 (February 2021).
- (2021): Seismic performance of reinforced concrete interior beam-column joints with novel reinforcement detail. In: Engineering Structures, v. 227 (January 2021).
- (2022): Damage detection under temperature conditions using PCA – an application to the Z24 Bridge. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 175, n. 11 (November 2022).
- (2021): Experimental study of seismic in-plane elliptical damper with empirical design formulae. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 174, n. 8 (August 2021).
- (2018): Effects of non-welded multi-rib stiffeners on the performance of steel plate shear walls. In: Journal of Constructional Steel Research, v. 144 (May 2018).
- (2019): Removal of masking effect for damage detection of structures. In: Engineering Structures, v. 183 (March 2019).
- (2011): Effects of brace stiffness on performance of structures with supplemental Maxwell model-based brace-damper systems. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 1 (January 2011).
- (2012): Applicability investigation of code-defined procedures on seismic performance assessment of typical school buildings in Taiwan. In: Engineering Structures, v. 36 (March 2012).
- (2006): Optimal design theories and applications of tuned mass dampers. In: Engineering Structures, v. 28, n. 1 (January 2006).
- (2015): Optimisation of Direct Expansion (DX) Cooling Coils Aiming to Building Energy Efficiency. In: Journal of Building Construction and Planning Research, v. 3, n. 2 ( 2015).
- (2011): Experimental Study on the Performance of Approach Slabs under Deteriorating Soil Washout Conditions. In: Journal of Bridge Engineering (ASCE), v. 16, n. 5 (September 2011).
- (2014): Novel probabilistic approach to assessing barge–bridge collision damage based on vibration measurements through transitional Markov chain Monte Carlo sampling. In: Journal of Civil Structural Health Monitoring, v. 4, n. 2 (January 2014).
Structurae cooperates with
