Yong Chen 
- (2024): Automatic Construction and Uncertainty Analysis of Geological Profiles in Dredging Engineering Based on Multiple-Point Geostatistics. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 150, n. 6 (November 2024).
- (2024): Experimental and theoretical modelling of fluctuating internal wind pressures on a ventilated double skin facade of a building. In: Energy and Buildings, v. 323 (November 2024).
- (2019): Experimental study on the seismic behaviour of composite shear walls with stiffened steel plates and infilled concrete. In: Thin-Walled Structures, v. 144 (November 2019).
- (2024): Experimental and numerical study on the seismic behavior of groove grouting precast concrete shear walls with different joint types. In: Structures, v. 59 (January 2024).
- (2024): Experimental investigation on wind-induced vibration of photovoltaic modules supported by suspension cables. In: Engineering Structures, v. 299 (January 2024).
- (2023): Initial stiffness of connection joining I-beam to concrete-filled multicellular steel tube wall. In: Journal of Constructional Steel Research, v. 210 (November 2023).
- (2023): Computational Simulation of the Correlations in a Port–Hinterland System from a Tourism Spatial Optimization Perspective. In: Buildings, v. 13, n. 3 (26 February 2023).
- (2023): Effects of Phase Change Materials on the Freeze–Thaw Performance of Expansive Soil. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2023): Development of a high strength cementitious grout for filling the joints of UHPC permanent formwork. In: Developments in the Built Environment, v. 13 (March 2023).
- (2023): Effect of admixtures and PVA fiber on the mechanical properties of high strength cementitious grout. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Experimental Study of Wind Loads on Tubular Crossarms of Transmission Towers. In: Journal of Structural Engineering (ASCE), v. 149, n. 3 (March 2023).
- (2006): Application of magnetoelastic stress sensors in large steel cables. In: Smart Structures and Systems, v. 2, n. 2 (April 2006).
- (2022): Hydraulic Properties of Selected Materials and Their Effects on Remediation Cr(VI) Contaminated Groundwater. In: Journal of Environmental Engineering (ASCE), v. 148, n. 6 (June 2022).
- (2022): Effects of Freeze–Thaw Cycles on Volume Change Behavior and Mechanical Properties of Expansive Clay with Different Degrees of Compaction. In: International Journal of Geomechanics, v. 22, n. 5 (May 2022).
- (2021): Effect of the combined aerodynamic control on the amplitude characteristics of wind loads on a tall building. In: Engineering Structures, v. 245 (October 2021).
- (2017): Application of Hydraulic Fracturing and Energy-Absorption Rockbolts to Improve the Stability of a Gob-Side Roadway in a 10-m-Thick Coal Seam: Case Study. In: International Journal of Geomechanics, v. 17, n. 12 (December 2017).
- (2021): Fatigue crack initiation and energy-based life analysis for Q345qD bridge steel at low temperatures. In: Journal of Constructional Steel Research, v. 180 (May 2021).
- (2018): Cyclic response and modeling of saturated silty clay due to fluctuations in reservoir water level of the Three Gorges Dam, China. In: Soils and Foundations, v. 58, n. 3 (June 2018).
- (2016): Concentration characteristics of ozone and product for indoor occupant surface chemical reaction under displacement ventilation. In: Energy and Buildings, v. 130 (October 2016).
- (2020): Empirical Method for Evaluating Resilient Modulus of Saturated Silty Clay under Cyclic Loading. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2016): Effect of motion path of downburst on wind-induced conductor swing in transmission line. In: Wind & Structures, v. 23, n. 3 (September 2016).
- (2013): Computational study of a small scale vertical axis wind turbine (VAWT): comparative performance of various turbulence models. In: Wind & Structures, v. 17, n. 6 (December 2013).
- (2015): Creep performance of concrete-filled steel tubular (CFST) columns and applications to a CFST arch bridge. In: Steel and Composite Structures, v. 19, n. 1 (July 2015).
- (2007): Characteristics of response spectra for long-periods of main-shock recordings of the Chi-Chi earthquake. In: Earthquake Engineering and Engineering Vibration, v. 6, n. 2 (June 2007).
- (2019): Effects of chord pre-load on strength of CHS X-joints stiffened with external ring stiffeners and gusset plates. In: Engineering Structures, v. 195 (September 2019).
- (2010): Decision Fusion for Structural Damage Detection: Numerical and Experimental Studies. In: Advances in Civil Engineering, v. 2010 ( 2010).
- (2017): Accurately controlled sequential self-folding structures by polystyrene film. In: Smart Materials and Structures, v. 26, n. 8 (August 2017).
- (2005): Experimental evaluation of the Smart Spring for helicopter vibration suppression through blade root impedance control. In: Smart Materials and Structures, v. 14, n. 5 (October 2005).
- (2011): Design and verification of a smart wing for an extreme-agility micro-air-vehicle. In: Smart Materials and Structures, v. 20, n. 12 (December 2011).
- (2017): Comparison of the Built Environment of Homes for the Aged in China by Postoccupancy Evaluation. In: Journal of Architectural Engineering (ASCE), v. 23, n. 3 (September 2017).
Structurae cooperates with
