Yiyi Chen 
- (2019): Seismic performance of high-strength-steel frame equipped with sacrificial beams of non-compact sections in energy dissipation bays. In: Thin-Walled Structures, v. 139 (June 2019).
- (2024): Resistance and strain during tearing for tubular joints under reversed axial actions. In: Journal of Constructional Steel Research, v. 213 (February 2024).
- (2023): Stress-state-dependency of post-necking hardening rule and its influence on ductile fracture prediction. In: Journal of Constructional Steel Research, v. 202 (March 2023).
- (2022): Seismic performance study on Q460 high-strength steel welded cruciform beam-column connections. In: Journal of Constructional Steel Research, v. 198 (November 2022).
- (2022): Pull-down test and numerical validation of multi-story steel moment frame using pulley-based loading system. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Rapid probabilistic loss assessment of buildings based on post-earthquake structural deformation conditions. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Seismic robustness of selfâcentering braced frames suffering tendon failure. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 6 (May 2021).
- (2021): Seismic Performance of Self-centering Steel Frames with SMA-viscoelastic Hybrid Braces. In: Journal of Earthquake Engineering, v. 26, n. 10 (July 2021).
- (2020): Seismic performance of concrete-filled SHS column-to-beam connections with slip-critical blind bolts. In: Journal of Constructional Steel Research, v. 170 (July 2020).
- (2020): SMA-Based Low-Damage Solution for Self-Centering Steel and Composite Beam-to-Column Connections. In: Journal of Structural Engineering (ASCE), v. 146, n. 6 (June 2020).
- (2013): Seismic performance of floor-by-floor assembled steel braced structures with stiffened connections. In: The IES Journal Part A: Civil & Structural Engineering, v. 6, n. 2 (May 2013).
- (2009): Research on end-plate connection with non-completely penetrated welds. In: Journal of Constructional Steel Research, v. 65, n. 1 (January 2009).
- (2015): Simulation of ductile fracture in welded tubular connections using a simplified damage plasticity model considering the effect of stress triaxiality and Lode angle. In: Journal of Constructional Steel Research, v. 114 (November 2015).
- (2014): Test and analysis on the seismic performance of a steel truss-to-circular CFT column sub-assembly. In: Journal of Constructional Steel Research, v. 103 (December 2014).
- (2019): Sectional constitutive model for the thin-walled steel H-section beam-column element. In: Journal of Constructional Steel Research, v. 156 (May 2019).
- (2016): Seismic design of multistory tension-only concentrically braced beam-through frames aimed at uniform inter-story drift. In: Journal of Constructional Steel Research, v. 122 (July 2016).
- (2016): Seismic performance of MRFs with high strength steel main frames and EDBs. In: Journal of Constructional Steel Research, v. 126 (November 2016).
- (2017): A theoretical model for the rotational stiffness of storage rack beam-to-upright connections. In: Journal of Constructional Steel Research, v. 133 (June 2017).
- (2017): The strain-weighted energy damage model for structural steel under cyclic loading. In: Journal of Constructional Steel Research, v. 139 (December 2017).
- (2015): Study on the Progressive Collapse of Large Span Truss-beam Structures Induced by Initial Member Break. Presented at: IABSE Workshop: Safety, Robustness and Condition Assessment of Structures, Helsinki, Finland, 11-12 February 2015.
- (2010): Test and numerical simulation of partially encased composite columns subject to axial and cyclic horizontal loads. In: International Journal of Steel Structures, v. 10, n. 4 ( 2010).
- (2015): Three-Dimensional Cyclic Performance on New Ring-Beam Connection between Concrete-Filled Tubular Column and Reinforced-Concrete Beams. In: Advances in Structural Engineering, v. 18, n. 8 (August 2015).
- (2016): Seismic performance of steel H-beam to SHS-column cast modular panel zone joints. In: Engineering Structures, v. 117 (June 2016).
- (2016): A special reinforcing technique to improve resistance of beam-to-tubular column connections for progressive collapse prevention. In: Engineering Structures, v. 117 (June 2016).
- (2017): Self-centring behaviour of steel and steel-concrete composite connections equipped with NiTi SMA bolts. In: Engineering Structures, v. 150 (November 2017).
- (2012): Progressive Collapse Analysis and Safety Assessment Method for Steel Truss Roof. In: Journal of Performance of Constructed Facilities (ASCE), v. 26, n. 3 (June 2012).
- (2009): Seismic performance of prestressed concrete stand structure supporting retractable steel roof. In: Frontiers of Architecture and Civil Engineering in China, v. 3, n. 2 (January 2009).
- (2008): Tests on impact effect of partial fracture at steel frame connections. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 4 (October 2008).
- (2008): Strength of tubular welded joints of roof trusses in Shanghai Qizhong Tennis Center. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 1 (March 2008).
- (2018): Seismic Behavior of Self-Centering Modular Panel with Slit Steel Plate Shear Walls: Experimental Testing. In: Journal of Structural Engineering (ASCE), v. 144, n. 1 (January 2018).
Structurae cooperates with
