Wujun Chen
- (2024): Summer and winter performance evaluation of double layered PTFE dome with aerogel-glass wool thermal insulation- field experiments and numerical simulation. In: Energy and Buildings, v. 319 (September 2024).
- (2024): Thermo-structural analysis and design for multi-functional membrane roofs of airport terminals. In: Structures, v. 62 (April 2024).
- (2023): Structural design and experimental study on the axial compression behavior of large-span carbon-fiber-reinforced polymer truss structures. In: Advances in Structural Engineering, v. 27, n. 2 (11 December 2023).
- (2023): OPV-PCM-ETFE foils in use for public buildings: electrical performance and thermal characteristics. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Numerical and experimental studies on the dynamic equivalence of a large rectangular membrane and a grid membrane. In: Engineering Structures, v. 292 (October 2023).
- (2023): Structural design and integral assembly procedure of rigid-flexible tensegrity airship structure. In: Engineering Structures, v. 284 (June 2023).
- (2023): Research on the control limits of cable length errors of cable-strut tensile structures for prestressed relaxation under load effect. In: Structures, v. 54 (August 2023).
- (2023): Static stability test and simulation of a large-scale modular carbon fiber reinforced polymer wheel-spoke-shaped stiffening ring subjected to multi-point radial loading. In: Engineering Structures, v. 285 (June 2023).
- (2023): Structural design and manufacturing length errors analyses of crossed spoke cable-truss structure. In: Advances in Structural Engineering, v. 26, n. 7 (February 2023).
- (2023): Structural design and compression-bending test of ultra-lightweight carbon-fiber-reinforced polymer truss structures. In: Composite Structures, v. 313 (June 2023).
- (2022): Thermal environment analysis of enclosed dome with double-layered PTFE fabric roof integrated with aerogel-glass wool insulation mats: On-site test and numerical simulation. In: Energy and Buildings, v. 254 (January 2022).
- (2021): Shear performance and mechanism analysis of warp-knitted non-crimp fabric composites under combined shear and tension loading. In: Composite Structures, v. 263 (May 2021).
- (2021): Rate-dependent mechanical properties and elastic modulus of ETFE foils used in inflated forming of transparency air-inflated cushion membrane structures. In: Engineering Structures, v. 227 (January 2021).
- (2017): Two-layer ETFE cushions integrated flexible photovoltaics: Prototype development and thermal performance assessment. In: Energy and Buildings, v. 141 (April 2017).
- (2020): Photothermal-structural-fluid behaviors of PV-ETFE cushion roof in summer: Numerical analysis using three-dimensional multiphysics model. In: Energy and Buildings, v. 228 (December 2020).
- (2019): A multi-scale method for predicting ABD stiffness matrix of single-ply weave-reinforced composite. In: Composite Structures, v. 230 (December 2019).
- (2019): Response surface characterization for biaxial tensile properties of envelope fabrics under multiple stress ratios. In: Composite Structures, v. 230 (December 2019).
- (2018): A new biaxial tensile shear test method to measure shear behaviour of coated fabrics for architectural use. In: Composite Structures, v. 203 (November 2018).
- (2017): A study of flattening process of deployable composite thin-walled lenticular tubes under compression and tension. In: Composite Structures, v. 168 (May 2017).
- (2016): Mechanical characteristics of deployable composite thin-walled lenticular tubes. In: Composite Structures, v. 153 (October 2016).
- (2020): Safety and serviceability of membrane buildings: A critical review on architectural, material and structural performance. In: Engineering Structures, v. 210 (May 2020).
- (2020): Temperature-stress-time methodology for flat-patterning ETFE cushions in use for large-span building structures. In: Engineering Structures, v. 204 (February 2020).
- (2014): Uniaxial cyclic tensile mechanical properties of ethylene tetrafluoroethylene (ETFE) foils. In: Construction and Building Materials, v. 63 (July 2014).
- (2015): Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: A comparison between analytical and experimental results. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Mechanical properties of ETFE foils in form-developing of inflated cushion through flat-patterning. In: Construction and Building Materials, v. 111 (May 2016).
- (2017): Modal behaviors and influencing factors analysis of inflated membrane structures. In: Engineering Structures, v. 132 (February 2017).
- (2017): Mechanical properties and structural performance of ETFE (ethylene-tetrafluoroethylene) cushion structures at low temperatures. In: Engineering Structures, v. 136 (April 2017).
- (2018): Shear behavior of architectural coated fabrics under biaxial bias-extension. In: Construction and Building Materials, v. 187 (October 2018).
- (2018): Shear Properties of PVDF-Coated Fabrics under Multicyclic Biaxial Bias Extension. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (October 2018).
- (2017): Shear properties of P/G type architectural fabrics under biaxial extension. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
