Can Chen 
- (2024): Damage Behavior of Porous Asphalt Concrete under Load–Pore Pressure Effects. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024).
- (2024): Shear behavior of a two-component non-water reactive foamed polyurethane (TNFPU) grouting material under different stress levels. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Tensile behavior of textile reinforced ultra-high performance concrete. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Rapid extraction of pavement aggregate gradation based on point clouds using deep learning networks. In: Automation in Construction, v. 154 (October 2023).
- (2023): Shear performance of stirrup corroded RC beams: Effects of strengthening interventions and corrosion rates. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2015): Assessment of Composite Pavement Performance by Survival Analysis. In: Journal of Transportation Engineering, v. 141, n. 9 (September 2015).
- (2020): Simulation and Influence Factors of Nitrous Oxide (N2O) Gases Emission under Different Straw Retention Depths. In: Journal of Environmental Engineering (ASCE), v. 146, n. 3 (March 2020).
- (2014): Water flow simulation and analysis in HMA microstructure. In: Journal of Traffic and Transportation Engineering (English Edition), v. 1, n. 5 (October 2014).
- (2019): New combined supercritical carbon dioxide cycles for coal-fired power plants. In: Sustainable Cities and Society, v. 50 (October 2019).
- (2020): Treatments to improve the aeolian sand foundation in solar park construction. In: Geotechnical Research, v. 7, n. 4 (December 2020).
- (2014): Performance comparison of heat exchangers with different circuitry arrangements for active chilled beam applications. In: Energy and Buildings, v. 79 (August 2014).
- (2015): Further study on the heat exchanger circuitry arrangement for an active chilled beam terminal unit. In: Energy and Buildings, v. 103 (September 2015).
- (2016): Model-based method for testing, adjusting and balancing of HVAC duct system. In: Energy and Buildings, v. 126 (August 2016).
- (2020): Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints. In: Composite Structures, v. 235 (March 2020).
- (2021): Dynamic origin‐destination flow estimation using automatic vehicle identification data: A 3D convolutional neural network approach. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 1 (19 December 2021).
- (2016): Fan-independent air balancing method based on computation model of air duct system. In: Building and Environment, v. 105 (August 2016).
- (2019): Performance Characteristics of Diluted Epoxy Asphalt Binders and Their Potential Application in Chip Seal. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 12 (December 2019).
- (2014): Experimental research on concrete strength prediction by Limpet pull-off test in China. In: International Journal of Structural Engineering, v. 5, n. 1 ( 2014).
- (2019): Numerical simulation and full-scale test on dynamic response of corroded concrete pipelines under Multi-field coupling. In: Construction and Building Materials, v. 200 (March 2019).
- (2013): Quality control/quality assurance testing for longitudinal joint density and segregation of asphalt mixtures. In: Construction and Building Materials, v. 47 (October 2013).
- (2015): Early-Age Index Choosing for Long-Term Quality Evaluation of Concrete Structures. In: Advances in Structural Engineering, v. 18, n. 12 (December 2015).
- (2013): Seasonal Variation of Surface Chloride Ion Content and Chloride Diffusion Coefficient in a Concrete Dock. In: Advances in Structural Engineering, v. 16, n. 2 (February 2013).
- (2018): The Non-Destructive Modulus Testing And Performance Evaluation For Asphalt Pavement Reflective Cracking Mitigation Treatments. In: The Baltic Journal of Road and Bridge Engineering, v. 13, n. 1 (March 2018).
Structurae cooperates with
