Soo-Ho Chang
- (2017): A Closer Look at the Design of Cutterheads for Hard Rock Tunnel-Boring Machines. In: Engineering, v. 3, n. 6 (December 2017).
- (2014): Consideration on design procedure of room-and-pillar underground structure part II: selection of shape to design supports. In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 16, n. 5 ( 2014).
- (2014): Consideration on design procedure of room-and-pillar underground structure part I: parametric study. In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 16, n. 5 ( 2014).
- (2014): Analysis of segment lining cracking load considering axial force by varying boundary condition. In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 16, n. 2 ( 2014).
- (2013): 선형절삭실험 중 디스크커터 축에 작용하는 하중과 온도에 대한 실험적 연구 (An experimental study on the loads and temperature acting on the shaft of a disc cutter during linear rock cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2013): TBM 터널 세그먼트용 60 MPa급 강섬유보강콘크리트의 휨성능 평가 (Flexural performance evaluation of SFRC with design strength of 60 MPa). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2013): 실물파괴실험에 의한 세그먼트 라이닝의 강섬유 보강 효과 평가 (Evaluation of steel fiber reinforcement effect in segment lining by full scale bending test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2013): 쉴드TBM의 현장 디스크커터 관입깊이에 대한 연구 (Evaluation of disc cutter penetration depth of shield TBM in practice). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 3 ( 2013).
- (2013): 주방식 공법에서 무지보 암주의 강도 산정에 관한 수치해석적 연구 (A numerical study on evaluation of unsupported pillar strength in the room and pillar method). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 4 ( 2013).
- (2017): 뿜어붙임멤브레인의 방수성능 및 염수저항성의 기초평가 (A preliminary study of watertightness and salt water resistance of spray-applied membrane). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 19, n. 2 (March 2017).
- (2016): 선형절삭시험에 의한 코니컬커터의 삽입재 크기에 따른 절삭성능 평가 (Performance estimation depending on the insert size of conical picks by linear cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 18, n. 2 (31 March 2016).
- (2015): 접촉 거동을 고려한 TSL(Thin Spray-on Liner)의 수치해석 연구 (Numerical study on contact behavior of TSL (Thin Spray-on Liner)). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 6 (30 November 2015).
- (2015): A 발파 굴착에 의한 주방식 지하구조물의 굴착공기 분석 연구 (preliminary study on the excavation sequence of a room-and-pillar underground structure by the drill-and-blast method). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 6 (30 November 2015).
- (2012): TBM 터널 세그먼트용 강섬유보강 콘크리트의 인장특성 평가 (Evaluation of tensile properties of SFRC for TBM tunnel segment). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 3 (31 May 2012).
- (2012): An 고강도 콘크리트와 고장력 철근을 적용한 쉴드 세그먼트의 역학적 거동에 대한 실험적 연구 (experimental study on mechanical behavior of shield segment with high-strength concrete and high-tension rebar). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 3 (31 May 2012).
- (2012): 암석의 선형절삭실험에 의한 디스크커터의 변형특성 평가 (Characterization of the deformation of a disc cutter in linear rock cutting test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 3 (31 May 2012).
- (2015): 국산 커터헤드를 장착한 직경 3.6 m 토압식 쉴드TBM의 제작과 현장적용성 분석 (Refurbishment of a 3.6 m earth-pressure balanced shield TBM with a domestic cutterhead and its field verification). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 4 (31 July 2015).
- (2012): A 사각형 강관을 이용한 비개착 시공에 따른 지반거동의 분석: 수치해석 (numerical study on the three-dimensional ground movement by the trenchless construction method of concrete box by a square steel pipe supporting system). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 5 (30 September 2012).
- (2012): An 사각형 강관을 이용한 비개착 시공에 따른 지반거동의 분석: 모래지반에 대한 모형 토조실험 (experimental study on the ground movement around a square pipe by its penetration for trenchless construction in sandy ground). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 14, n. 5 (30 September 2012).
- (2013): DPT 실험을 이용한 고온노출된 강섬유보강콘크리트의 인장강도 평가 (Tensile strength evaluation of SFRC subjected to high temperature using double punch test). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 1 (30 January 2013).
- (2013): A 주방식 지하공간의 구조적 안정성 평가개념 정립에 관한 연구 (study on conceptual evaluation of structural stability of room-and-pillar underground space). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 6 (30 November 2013).
- (2013): A 2아치 터널 굴착 공법과의 비교를 통한 주방식 굴착 공법의 예비 경제성 검토 연구 (preliminary study on economical efficiency of a room-and-pillar excavation method in comparison with 2-arch tunnelling method). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 15, n. 6 (30 November 2013).
- (2015): 강섬유 보강 콘크리트의 전자파 차폐효과 (Electromagnetic wave shielding effectiveness of steel fiber reinforced concrete). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 2 ( 2015).
- (2010): Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method. In: Tunnelling and Underground Space Technology, v. 25, n. 3 (May 2010).
- (2006): Performance prediction of TBM disc cutting on granitic rock by the linear cutting test. In: Tunnelling and Underground Space Technology, v. 21, n. 3-4 (May 2006).
- (2006): Prediction of corrosion of fully cement-grouted rockbolts by chloride diffusion. In: Tunnelling and Underground Space Technology, v. 21, n. 3-4 (May 2006).
- (2013): A holistic numerical approach to simulating the thermal and mechanical behaviour of a tunnel lining subject to fire. In: Tunnelling and Underground Space Technology, v. 35 (April 2013).
- (2013): Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement. In: Tunnelling and Underground Space Technology, v. 35 (April 2013).
- (2018): Numerical approach to assessing the contact characteristics of a polymer-based waterproof membrane. In: Tunnelling and Underground Space Technology, v. 79 (September 2018).
- (2016): Determination of the combined heat transfer coefficient to simulate the fire-induced damage of a concrete tunnel lining under a severe fire condition. In: Tunnelling and Underground Space Technology, v. 54 (April 2016).
Structurae cooperates with
