Seung-Hwan Chang 
- (2022): Performance of liquid crystalline polyester composite burn-in board connectors under cyclic high-temperature condition. In: Composite Structures, v. 286 (April 2022).
- (2021): Prediction of composite layer thickness for Type III hydrogen pressure vessel at the dome part. In: Composite Structures, v. 271 (September 2021).
- (2020): Novel biodegradable hybrid composite of polylactic acid (PLA) matrix reinforced by bioactive glass (BG) fibres and magnesium (Mg) wires for orthopaedic application. In: Composite Structures, v. 245 (August 2020).
- (2020): Impact characterisation of draped composite structures made of plain-weave carbon/epoxy prepregs utilising smart grid fabric consisting of ferroelectric ribbon sensors. In: Composite Structures, v. 238 (April 2020).
- (2019): Simulation of compression moulding process for long-fibre reinforced thermoset composites considering fibre bending. In: Composite Structures, v. 230 (December 2019).
- (2019): Stretchable strain sensor based on a nanocomposite of zinc stannate nanocubes and silver nanowires. In: Composite Structures, v. 224 (September 2019).
- (2017): Hygroscopic effects on the penetration-resistance behavior of a specially-orthotropic CFRP composite plates. In: Composite Structures, v. 176 (September 2017).
- (2017): Influence of initial biomechanical environment provided by fibrous composite intramedullary nails on bone fracture healing. In: Composite Structures, v. 175 (September 2017).
- (2017): Formability of complex composite structures with ribs made of long carbon-fiber-reinforced prepregs. In: Composite Structures, v. 168 (May 2017).
- (2017): How post-operative rehabilitation exercises influence the healing process of radial bone shaft fractures fixed by a composite bone plate. In: Composite Structures, v. 159 (January 2017).
- (2015): Flexible cell culture device made of membrane-type silicone composites for simulating human body. In: Composite Structures, v. 134 (December 2015).
- (2015): Thermal behavior and performance evaluation of epoxy-based polymer concretes containing silicone rubber for use as runway repair materials. In: Composite Structures, v. 119 (January 2015).
- (2015): Optimal design of a functionally graded biodegradable composite bone plate by using the Taguchi method and finite element analysis. In: Composite Structures, v. 119 (January 2015).
- (2015): Stress analysis of runway repaired using compliant polymer concretes with consideration of cure shrinkage. In: Composite Structures, v. 119 (January 2015).
- (2014): Safety evaluation of 70MPa-capacity type III hydrogen pressure vessel considering material degradation of composites due to temperature rise. In: Composite Structures, v. 113 (July 2014).
- (2019): Mechanical performance evaluation of composite hybrid pantograph upper arm under environmental cyclic conditions: Experimental verification. In: Composite Structures, v. 210 (February 2019).
Structurae cooperates with
